summaryrefslogtreecommitdiffstats
path: root/src/gallium/drivers/llvmpipe
diff options
context:
space:
mode:
Diffstat (limited to 'src/gallium/drivers/llvmpipe')
-rw-r--r--src/gallium/drivers/llvmpipe/lp_setup_line.c81
-rw-r--r--src/gallium/drivers/llvmpipe/lp_setup_tri.c98
2 files changed, 110 insertions, 69 deletions
diff --git a/src/gallium/drivers/llvmpipe/lp_setup_line.c b/src/gallium/drivers/llvmpipe/lp_setup_line.c
index f425825fc2a..f6e1198d036 100644
--- a/src/gallium/drivers/llvmpipe/lp_setup_line.c
+++ b/src/gallium/drivers/llvmpipe/lp_setup_line.c
@@ -336,13 +336,6 @@ try_setup_line( struct lp_setup_context *setup,
layer = MIN2(layer, scene->fb_max_layer);
}
- if (setup->scissor_test) {
- nr_planes = 8;
- }
- else {
- nr_planes = 4;
- }
-
dx = v1[0][0] - v2[0][0];
dy = v1[0][1] - v2[0][1];
area = (dx * dx + dy * dy);
@@ -591,6 +584,20 @@ try_setup_line( struct lp_setup_context *setup,
bbox.x0 = MAX2(bbox.x0, 0);
bbox.y0 = MAX2(bbox.y0, 0);
+ nr_planes = 4;
+ /*
+ * Determine how many scissor planes we need, that is drop scissor
+ * edges if the bounding box of the tri is fully inside that edge.
+ */
+ if (setup->scissor_test) {
+ /* why not just use draw_regions */
+ struct u_rect *scissor = &setup->scissors[viewport_index];
+ nr_planes += (bbox.x0 < scissor->x0);
+ nr_planes += (bbox.x1 > scissor->x1);
+ nr_planes += (bbox.y0 < scissor->y0);
+ nr_planes += (bbox.y1 > scissor->y1);
+ }
+
line = lp_setup_alloc_triangle(scene,
key->num_inputs,
nr_planes,
@@ -708,30 +715,44 @@ try_setup_line( struct lp_setup_context *setup,
* Note that otherwise, the scissor planes only vary in 'C' value,
* and even then only on state-changes. Could alternatively store
* these planes elsewhere.
+ * (Or only store the c value together with a bit indicating which
+ * scissor edge this is, so rasterization would treat them differently
+ * (easier to evaluate) to ordinary planes.)
*/
- if (nr_planes == 8) {
- const struct u_rect *scissor =
- &setup->scissors[viewport_index];
-
- plane[4].dcdx = -1 << 8;
- plane[4].dcdy = 0;
- plane[4].c = (1-scissor->x0) << 8;
- plane[4].eo = 1 << 8;
-
- plane[5].dcdx = 1 << 8;
- plane[5].dcdy = 0;
- plane[5].c = (scissor->x1+1) << 8;
- plane[5].eo = 0;
-
- plane[6].dcdx = 0;
- plane[6].dcdy = 1 << 8;
- plane[6].c = (1-scissor->y0) << 8;
- plane[6].eo = 1 << 8;
-
- plane[7].dcdx = 0;
- plane[7].dcdy = -1 << 8;
- plane[7].c = (scissor->y1+1) << 8;
- plane[7].eo = 0;
+ if (nr_planes > 4) {
+ /* why not just use draw_regions */
+ struct u_rect *scissor = &setup->scissors[viewport_index];
+ struct lp_rast_plane *plane_s = &plane[4];
+
+ if (bbox.x0 < scissor->x0) {
+ plane_s->dcdx = -1 << 8;
+ plane_s->dcdy = 0;
+ plane_s->c = (1-scissor->x0) << 8;
+ plane_s->eo = 1 << 8;
+ plane_s++;
+ }
+ if (bbox.x1 > scissor->x1) {
+ plane_s->dcdx = 1 << 8;
+ plane_s->dcdy = 0;
+ plane_s->c = (scissor->x1+1) << 8;
+ plane_s->eo = 0 << 8;
+ plane_s++;
+ }
+ if (bbox.y0 < scissor->y0) {
+ plane_s->dcdx = 0;
+ plane_s->dcdy = 1 << 8;
+ plane_s->c = (1-scissor->y0) << 8;
+ plane_s->eo = 1 << 8;
+ plane_s++;
+ }
+ if (bbox.y1 > scissor->y1) {
+ plane_s->dcdx = 0;
+ plane_s->dcdy = -1 << 8;
+ plane_s->c = (scissor->y1+1) << 8;
+ plane_s->eo = 0;
+ plane_s++;
+ }
+ assert(plane_s == &plane[nr_planes]);
}
return lp_setup_bin_triangle(setup, line, &bbox, nr_planes, viewport_index);
diff --git a/src/gallium/drivers/llvmpipe/lp_setup_tri.c b/src/gallium/drivers/llvmpipe/lp_setup_tri.c
index 1e3a7501ed5..7b0088912bd 100644
--- a/src/gallium/drivers/llvmpipe/lp_setup_tri.c
+++ b/src/gallium/drivers/llvmpipe/lp_setup_tri.c
@@ -302,13 +302,6 @@ do_triangle_ccw(struct lp_setup_context *setup,
layer = MIN2(layer, scene->fb_max_layer);
}
- if (setup->scissor_test) {
- nr_planes = 7;
- }
- else {
- nr_planes = 3;
- }
-
/* Bounding rectangle (in pixels) */
{
/* Yes this is necessary to accurately calculate bounding boxes
@@ -347,6 +340,20 @@ do_triangle_ccw(struct lp_setup_context *setup,
bbox.x0 = MAX2(bbox.x0, 0);
bbox.y0 = MAX2(bbox.y0, 0);
+ nr_planes = 3;
+ /*
+ * Determine how many scissor planes we need, that is drop scissor
+ * edges if the bounding box of the tri is fully inside that edge.
+ */
+ if (setup->scissor_test) {
+ /* why not just use draw_regions */
+ struct u_rect *scissor = &setup->scissors[viewport_index];
+ nr_planes += (bbox.x0 < scissor->x0);
+ nr_planes += (bbox.x1 > scissor->x1);
+ nr_planes += (bbox.y0 < scissor->y0);
+ nr_planes += (bbox.y1 > scissor->y1);
+ }
+
tri = lp_setup_alloc_triangle(scene,
key->num_inputs,
nr_planes,
@@ -367,13 +374,11 @@ do_triangle_ccw(struct lp_setup_context *setup,
/* Setup parameter interpolants:
*/
- setup->setup.variant->jit_function( v0,
- v1,
- v2,
- frontfacing,
- GET_A0(&tri->inputs),
- GET_DADX(&tri->inputs),
- GET_DADY(&tri->inputs) );
+ setup->setup.variant->jit_function(v0, v1, v2,
+ frontfacing,
+ GET_A0(&tri->inputs),
+ GET_DADX(&tri->inputs),
+ GET_DADY(&tri->inputs));
tri->inputs.frontfacing = frontfacing;
tri->inputs.disable = FALSE;
@@ -383,9 +388,9 @@ do_triangle_ccw(struct lp_setup_context *setup,
if (0)
lp_dump_setup_coef(&setup->setup.variant->key,
- (const float (*)[4])GET_A0(&tri->inputs),
- (const float (*)[4])GET_DADX(&tri->inputs),
- (const float (*)[4])GET_DADY(&tri->inputs));
+ (const float (*)[4])GET_A0(&tri->inputs),
+ (const float (*)[4])GET_DADX(&tri->inputs),
+ (const float (*)[4])GET_DADY(&tri->inputs));
plane = GET_PLANES(tri);
@@ -672,29 +677,44 @@ do_triangle_ccw(struct lp_setup_context *setup,
* Note that otherwise, the scissor planes only vary in 'C' value,
* and even then only on state-changes. Could alternatively store
* these planes elsewhere.
+ * (Or only store the c value together with a bit indicating which
+ * scissor edge this is, so rasterization would treat them differently
+ * (easier to evaluate) to ordinary planes.)
*/
- if (nr_planes == 7) {
- const struct u_rect *scissor = &setup->scissors[viewport_index];
-
- plane[3].dcdx = -1 << 8;
- plane[3].dcdy = 0;
- plane[3].c = (1-scissor->x0) << 8;
- plane[3].eo = 1 << 8;
-
- plane[4].dcdx = 1 << 8;
- plane[4].dcdy = 0;
- plane[4].c = (scissor->x1+1) << 8;
- plane[4].eo = 0;
-
- plane[5].dcdx = 0;
- plane[5].dcdy = 1 << 8;
- plane[5].c = (1-scissor->y0) << 8;
- plane[5].eo = 1 << 8;
-
- plane[6].dcdx = 0;
- plane[6].dcdy = -1 << 8;
- plane[6].c = (scissor->y1+1) << 8;
- plane[6].eo = 0;
+ if (nr_planes > 3) {
+ /* why not just use draw_regions */
+ struct u_rect *scissor = &setup->scissors[viewport_index];
+ struct lp_rast_plane *plane_s = &plane[3];
+
+ if (bbox.x0 < scissor->x0) {
+ plane_s->dcdx = -1 << 8;
+ plane_s->dcdy = 0;
+ plane_s->c = (1-scissor->x0) << 8;
+ plane_s->eo = 1 << 8;
+ plane_s++;
+ }
+ if (bbox.x1 > scissor->x1) {
+ plane_s->dcdx = 1 << 8;
+ plane_s->dcdy = 0;
+ plane_s->c = (scissor->x1+1) << 8;
+ plane_s->eo = 0 << 8;
+ plane_s++;
+ }
+ if (bbox.y0 < scissor->y0) {
+ plane_s->dcdx = 0;
+ plane_s->dcdy = 1 << 8;
+ plane_s->c = (1-scissor->y0) << 8;
+ plane_s->eo = 1 << 8;
+ plane_s++;
+ }
+ if (bbox.y1 > scissor->y1) {
+ plane_s->dcdx = 0;
+ plane_s->dcdy = -1 << 8;
+ plane_s->c = (scissor->y1+1) << 8;
+ plane_s->eo = 0;
+ plane_s++;
+ }
+ assert(plane_s == &plane[nr_planes]);
}
return lp_setup_bin_triangle(setup, tri, &bbox, nr_planes, viewport_index);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 08:26:43 +0000