diff options
Diffstat (limited to 'src/gallium/drivers/i965/brw_wm_glsl.c')
| -rw-r--r-- | src/gallium/drivers/i965/brw_wm_glsl.c | 1060 |
1 files changed, 5 insertions, 1055 deletions
diff --git a/src/gallium/drivers/i965/brw_wm_glsl.c b/src/gallium/drivers/i965/brw_wm_glsl.c index c9fe1dd8ad2..d836e2fb34a 100644 --- a/src/gallium/drivers/i965/brw_wm_glsl.c +++ b/src/gallium/drivers/i965/brw_wm_glsl.c @@ -6,9 +6,6 @@ #include "brw_eu.h" #include "brw_wm.h" -enum _subroutine { - SUB_NOISE1, SUB_NOISE2, SUB_NOISE3, SUB_NOISE4 -}; static struct brw_reg get_dst_reg(struct brw_wm_compile *c, const struct prog_instruction *inst, @@ -32,10 +29,6 @@ GLboolean brw_wm_is_glsl(const struct gl_fragment_program *fp) case OPCODE_CAL: case OPCODE_BRK: case OPCODE_RET: - case OPCODE_NOISE1: - case OPCODE_NOISE2: - case OPCODE_NOISE3: - case OPCODE_NOISE4: case OPCODE_BGNLOOP: return GL_TRUE; default: @@ -1495,1036 +1488,7 @@ static INLINE struct brw_reg odd_bytes( struct brw_reg reg ) 0, 16, 2 ); } -/* One-, two- and three-dimensional Perlin noise, similar to the description - in _Improving Noise_, Ken Perlin, Computer Graphics vol. 35 no. 3. */ -static void noise1_sub( struct brw_wm_compile *c ) { - struct brw_compile *p = &c->func; - struct brw_reg param, - x0, x1, /* gradients at each end */ - t, tmp[ 2 ], /* float temporaries */ - itmp[ 5 ]; /* unsigned integer temporaries (aliases of floats above) */ - int i; - int mark = mark_tmps( c ); - - x0 = alloc_tmp( c ); - x1 = alloc_tmp( c ); - t = alloc_tmp( c ); - tmp[ 0 ] = alloc_tmp( c ); - tmp[ 1 ] = alloc_tmp( c ); - itmp[ 0 ] = retype( tmp[ 0 ], BRW_REGISTER_TYPE_UD ); - itmp[ 1 ] = retype( tmp[ 1 ], BRW_REGISTER_TYPE_UD ); - itmp[ 2 ] = retype( x0, BRW_REGISTER_TYPE_UD ); - itmp[ 3 ] = retype( x1, BRW_REGISTER_TYPE_UD ); - itmp[ 4 ] = retype( t, BRW_REGISTER_TYPE_UD ); - - param = lookup_tmp( c, mark - 2 ); - - brw_set_access_mode( p, BRW_ALIGN_1 ); - - brw_MOV( p, itmp[ 2 ], brw_imm_ud( 0xBA97 ) ); /* constant used later */ - - /* Arrange the two end coordinates into scalars (itmp0/itmp1) to - be hashed. Also compute the remainder (offset within the unit - length), interleaved to reduce register dependency penalties. */ - brw_RNDD( p, retype( itmp[ 0 ], BRW_REGISTER_TYPE_D ), param ); - brw_FRC( p, param, param ); - brw_ADD( p, itmp[ 1 ], itmp[ 0 ], brw_imm_ud( 1 ) ); - brw_MOV( p, itmp[ 3 ], brw_imm_ud( 0x79D9 ) ); /* constant used later */ - brw_MOV( p, itmp[ 4 ], brw_imm_ud( 0xD5B1 ) ); /* constant used later */ - - /* We're now ready to perform the hashing. The two hashes are - interleaved for performance. The hash function used is - designed to rapidly achieve avalanche and require only 32x16 - bit multiplication, and 16-bit swizzles (which we get for - free). We can't use immediate operands in the multiplies, - because immediates are permitted only in src1 and the 16-bit - factor is permitted only in src0. */ - for( i = 0; i < 2; i++ ) - brw_MUL( p, itmp[ i ], itmp[ 2 ], itmp[ i ] ); - for( i = 0; i < 2; i++ ) - brw_XOR( p, low_words( itmp[ i ] ), low_words( itmp[ i ] ), - high_words( itmp[ i ] ) ); - for( i = 0; i < 2; i++ ) - brw_MUL( p, itmp[ i ], itmp[ 3 ], itmp[ i ] ); - for( i = 0; i < 2; i++ ) - brw_XOR( p, low_words( itmp[ i ] ), low_words( itmp[ i ] ), - high_words( itmp[ i ] ) ); - for( i = 0; i < 2; i++ ) - brw_MUL( p, itmp[ i ], itmp[ 4 ], itmp[ i ] ); - for( i = 0; i < 2; i++ ) - brw_XOR( p, low_words( itmp[ i ] ), low_words( itmp[ i ] ), - high_words( itmp[ i ] ) ); - - /* Now we want to initialise the two gradients based on the - hashes. Format conversion from signed integer to float leaves - everything scaled too high by a factor of pow( 2, 31 ), but - we correct for that right at the end. */ - brw_ADD( p, t, param, brw_imm_f( -1.0 ) ); - brw_MOV( p, x0, retype( tmp[ 0 ], BRW_REGISTER_TYPE_D ) ); - brw_MOV( p, x1, retype( tmp[ 1 ], BRW_REGISTER_TYPE_D ) ); - - brw_MUL( p, x0, x0, param ); - brw_MUL( p, x1, x1, t ); - - /* We interpolate between the gradients using the polynomial - 6t^5 - 15t^4 + 10t^3 (Perlin). */ - brw_MUL( p, tmp[ 0 ], param, brw_imm_f( 6.0 ) ); - brw_ADD( p, tmp[ 0 ], tmp[ 0 ], brw_imm_f( -15.0 ) ); - brw_MUL( p, tmp[ 0 ], tmp[ 0 ], param ); - brw_ADD( p, tmp[ 0 ], tmp[ 0 ], brw_imm_f( 10.0 ) ); - brw_MUL( p, tmp[ 0 ], tmp[ 0 ], param ); - brw_ADD( p, x1, x1, negate( x0 ) ); /* unrelated work to fill the - pipeline */ - brw_MUL( p, tmp[ 0 ], tmp[ 0 ], param ); - brw_MUL( p, param, tmp[ 0 ], param ); - brw_MUL( p, x1, x1, param ); - brw_ADD( p, x0, x0, x1 ); - /* scale by pow( 2, -30 ), to compensate for the format conversion - above and an extra factor of 2 so that a single gradient covers - the [-1,1] range */ - brw_MUL( p, param, x0, brw_imm_f( 0.000000000931322574615478515625 ) ); - - release_tmps( c, mark ); -} - -static void emit_noise1( struct brw_wm_compile *c, - const struct prog_instruction *inst ) -{ - struct brw_compile *p = &c->func; - struct brw_reg src, param, dst; - GLuint mask = inst->DstReg.WriteMask; - int i; - int mark = mark_tmps( c ); - - assert( mark == 0 ); - - src = get_src_reg( c, inst, 0, 0 ); - - param = alloc_tmp( c ); - - brw_MOV( p, param, src ); - - invoke_subroutine( c, SUB_NOISE1, noise1_sub ); - - /* Fill in the result: */ - brw_set_saturate( p, inst->SaturateMode == SATURATE_ZERO_ONE ); - for (i = 0 ; i < 4; i++) { - if (mask & (1<<i)) { - dst = get_dst_reg(c, inst, i); - brw_MOV( p, dst, param ); - } - } - if( inst->SaturateMode == SATURATE_ZERO_ONE ) - brw_set_saturate( p, 0 ); - - release_tmps( c, mark ); -} - -static void noise2_sub( struct brw_wm_compile *c ) { - - struct brw_compile *p = &c->func; - struct brw_reg param0, param1, - x0y0, x0y1, x1y0, x1y1, /* gradients at each corner */ - t, tmp[ 4 ], /* float temporaries */ - itmp[ 7 ]; /* unsigned integer temporaries (aliases of floats above) */ - int i; - int mark = mark_tmps( c ); - - x0y0 = alloc_tmp( c ); - x0y1 = alloc_tmp( c ); - x1y0 = alloc_tmp( c ); - x1y1 = alloc_tmp( c ); - t = alloc_tmp( c ); - for( i = 0; i < 4; i++ ) { - tmp[ i ] = alloc_tmp( c ); - itmp[ i ] = retype( tmp[ i ], BRW_REGISTER_TYPE_UD ); - } - itmp[ 4 ] = retype( x0y0, BRW_REGISTER_TYPE_UD ); - itmp[ 5 ] = retype( x0y1, BRW_REGISTER_TYPE_UD ); - itmp[ 6 ] = retype( x1y0, BRW_REGISTER_TYPE_UD ); - - param0 = lookup_tmp( c, mark - 3 ); - param1 = lookup_tmp( c, mark - 2 ); - - brw_set_access_mode( p, BRW_ALIGN_1 ); - - /* Arrange the four corner coordinates into scalars (itmp0..itmp3) to - be hashed. Also compute the remainders (offsets within the unit - square), interleaved to reduce register dependency penalties. */ - brw_RNDD( p, retype( itmp[ 0 ], BRW_REGISTER_TYPE_D ), param0 ); - brw_RNDD( p, retype( itmp[ 1 ], BRW_REGISTER_TYPE_D ), param1 ); - brw_FRC( p, param0, param0 ); - brw_FRC( p, param1, param1 ); - brw_MOV( p, itmp[ 4 ], brw_imm_ud( 0xBA97 ) ); /* constant used later */ - brw_ADD( p, high_words( itmp[ 0 ] ), high_words( itmp[ 0 ] ), - low_words( itmp[ 1 ] ) ); - brw_MOV( p, itmp[ 5 ], brw_imm_ud( 0x79D9 ) ); /* constant used later */ - brw_MOV( p, itmp[ 6 ], brw_imm_ud( 0xD5B1 ) ); /* constant used later */ - brw_ADD( p, itmp[ 1 ], itmp[ 0 ], brw_imm_ud( 0x10000 ) ); - brw_ADD( p, itmp[ 2 ], itmp[ 0 ], brw_imm_ud( 0x1 ) ); - brw_ADD( p, itmp[ 3 ], itmp[ 0 ], brw_imm_ud( 0x10001 ) ); - - /* We're now ready to perform the hashing. The four hashes are - interleaved for performance. The hash function used is - designed to rapidly achieve avalanche and require only 32x16 - bit multiplication, and 16-bit swizzles (which we get for - free). We can't use immediate operands in the multiplies, - because immediates are permitted only in src1 and the 16-bit - factor is permitted only in src0. */ - for( i = 0; i < 4; i++ ) - brw_MUL( p, itmp[ i ], itmp[ 4 ], itmp[ i ] ); - for( i = 0; i < 4; i++ ) - brw_XOR( p, low_words( itmp[ i ] ), low_words( itmp[ i ] ), - high_words( itmp[ i ] ) ); - for( i = 0; i < 4; i++ ) - brw_MUL( p, itmp[ i ], itmp[ 5 ], itmp[ i ] ); - for( i = 0; i < 4; i++ ) - brw_XOR( p, low_words( itmp[ i ] ), low_words( itmp[ i ] ), - high_words( itmp[ i ] ) ); - for( i = 0; i < 4; i++ ) - brw_MUL( p, itmp[ i ], itmp[ 6 ], itmp[ i ] ); - for( i = 0; i < 4; i++ ) - brw_XOR( p, low_words( itmp[ i ] ), low_words( itmp[ i ] ), - high_words( itmp[ i ] ) ); - - /* Now we want to initialise the four gradients based on the - hashes. Format conversion from signed integer to float leaves - everything scaled too high by a factor of pow( 2, 15 ), but - we correct for that right at the end. */ - brw_ADD( p, t, param0, brw_imm_f( -1.0 ) ); - brw_MOV( p, x0y0, low_words( tmp[ 0 ] ) ); - brw_MOV( p, x0y1, low_words( tmp[ 1 ] ) ); - brw_MOV( p, x1y0, low_words( tmp[ 2 ] ) ); - brw_MOV( p, x1y1, low_words( tmp[ 3 ] ) ); - - brw_MOV( p, tmp[ 0 ], high_words( tmp[ 0 ] ) ); - brw_MOV( p, tmp[ 1 ], high_words( tmp[ 1 ] ) ); - brw_MOV( p, tmp[ 2 ], high_words( tmp[ 2 ] ) ); - brw_MOV( p, tmp[ 3 ], high_words( tmp[ 3 ] ) ); - - brw_MUL( p, x1y0, x1y0, t ); - brw_MUL( p, x1y1, x1y1, t ); - brw_ADD( p, t, param1, brw_imm_f( -1.0 ) ); - brw_MUL( p, x0y0, x0y0, param0 ); - brw_MUL( p, x0y1, x0y1, param0 ); - - brw_MUL( p, tmp[ 0 ], tmp[ 0 ], param1 ); - brw_MUL( p, tmp[ 2 ], tmp[ 2 ], param1 ); - brw_MUL( p, tmp[ 1 ], tmp[ 1 ], t ); - brw_MUL( p, tmp[ 3 ], tmp[ 3 ], t ); - - brw_ADD( p, x0y0, x0y0, tmp[ 0 ] ); - brw_ADD( p, x1y0, x1y0, tmp[ 2 ] ); - brw_ADD( p, x0y1, x0y1, tmp[ 1 ] ); - brw_ADD( p, x1y1, x1y1, tmp[ 3 ] ); - - /* We interpolate between the gradients using the polynomial - 6t^5 - 15t^4 + 10t^3 (Perlin). */ - brw_MUL( p, tmp[ 0 ], param0, brw_imm_f( 6.0 ) ); - brw_MUL( p, tmp[ 1 ], param1, brw_imm_f( 6.0 ) ); - brw_ADD( p, tmp[ 0 ], tmp[ 0 ], brw_imm_f( -15.0 ) ); - brw_ADD( p, tmp[ 1 ], tmp[ 1 ], brw_imm_f( -15.0 ) ); - brw_MUL( p, tmp[ 0 ], tmp[ 0 ], param0 ); - brw_MUL( p, tmp[ 1 ], tmp[ 1 ], param1 ); - brw_ADD( p, x0y1, x0y1, negate( x0y0 ) ); /* unrelated work to fill the - pipeline */ - brw_ADD( p, tmp[ 0 ], tmp[ 0 ], brw_imm_f( 10.0 ) ); - brw_ADD( p, tmp[ 1 ], tmp[ 1 ], brw_imm_f( 10.0 ) ); - brw_MUL( p, tmp[ 0 ], tmp[ 0 ], param0 ); - brw_MUL( p, tmp[ 1 ], tmp[ 1 ], param1 ); - brw_ADD( p, x1y1, x1y1, negate( x1y0 ) ); /* unrelated work to fill the - pipeline */ - brw_MUL( p, tmp[ 0 ], tmp[ 0 ], param0 ); - brw_MUL( p, tmp[ 1 ], tmp[ 1 ], param1 ); - brw_MUL( p, param0, tmp[ 0 ], param0 ); - brw_MUL( p, param1, tmp[ 1 ], param1 ); - - /* Here we interpolate in the y dimension... */ - brw_MUL( p, x0y1, x0y1, param1 ); - brw_MUL( p, x1y1, x1y1, param1 ); - brw_ADD( p, x0y0, x0y0, x0y1 ); - brw_ADD( p, x1y0, x1y0, x1y1 ); - - /* And now in x. There are horrible register dependencies here, - but we have nothing else to do. */ - brw_ADD( p, x1y0, x1y0, negate( x0y0 ) ); - brw_MUL( p, x1y0, x1y0, param0 ); - brw_ADD( p, x0y0, x0y0, x1y0 ); - - /* scale by pow( 2, -15 ), as described above */ - brw_MUL( p, param0, x0y0, brw_imm_f( 0.000030517578125 ) ); - - release_tmps( c, mark ); -} - -static void emit_noise2( struct brw_wm_compile *c, - const struct prog_instruction *inst ) -{ - struct brw_compile *p = &c->func; - struct brw_reg src0, src1, param0, param1, dst; - GLuint mask = inst->DstReg.WriteMask; - int i; - int mark = mark_tmps( c ); - - assert( mark == 0 ); - - src0 = get_src_reg( c, inst, 0, 0 ); - src1 = get_src_reg( c, inst, 0, 1 ); - - param0 = alloc_tmp( c ); - param1 = alloc_tmp( c ); - - brw_MOV( p, param0, src0 ); - brw_MOV( p, param1, src1 ); - - invoke_subroutine( c, SUB_NOISE2, noise2_sub ); - - /* Fill in the result: */ - brw_set_saturate( p, inst->SaturateMode == SATURATE_ZERO_ONE ); - for (i = 0 ; i < 4; i++) { - if (mask & (1<<i)) { - dst = get_dst_reg(c, inst, i); - brw_MOV( p, dst, param0 ); - } - } - if( inst->SaturateMode == SATURATE_ZERO_ONE ) - brw_set_saturate( p, 0 ); - - release_tmps( c, mark ); -} - -/** - * The three-dimensional case is much like the one- and two- versions above, - * but since the number of corners is rapidly growing we now pack 16 16-bit - * hashes into each register to extract more parallelism from the EUs. - */ -static void noise3_sub( struct brw_wm_compile *c ) { - - struct brw_compile *p = &c->func; - struct brw_reg param0, param1, param2, - x0y0, x0y1, x1y0, x1y1, /* gradients at four of the corners */ - xi, yi, zi, /* interpolation coefficients */ - t, tmp[ 8 ], /* float temporaries */ - itmp[ 8 ], /* unsigned integer temporaries (aliases of floats above) */ - wtmp[ 8 ]; /* 16-way unsigned word temporaries (aliases of above) */ - int i; - int mark = mark_tmps( c ); - - x0y0 = alloc_tmp( c ); - x0y1 = alloc_tmp( c ); - x1y0 = alloc_tmp( c ); - x1y1 = alloc_tmp( c ); - xi = alloc_tmp( c ); - yi = alloc_tmp( c ); - zi = alloc_tmp( c ); - t = alloc_tmp( c ); - for( i = 0; i < 8; i++ ) { - tmp[ i ] = alloc_tmp( c ); - itmp[ i ] = retype( tmp[ i ], BRW_REGISTER_TYPE_UD ); - wtmp[ i ] = brw_uw16_grf( tmp[ i ].nr, 0 ); - } - - param0 = lookup_tmp( c, mark - 4 ); - param1 = lookup_tmp( c, mark - 3 ); - param2 = lookup_tmp( c, mark - 2 ); - - brw_set_access_mode( p, BRW_ALIGN_1 ); - - /* Arrange the eight corner coordinates into scalars (itmp0..itmp3) to - be hashed. Also compute the remainders (offsets within the unit - cube), interleaved to reduce register dependency penalties. */ - brw_RNDD( p, retype( itmp[ 0 ], BRW_REGISTER_TYPE_D ), param0 ); - brw_RNDD( p, retype( itmp[ 1 ], BRW_REGISTER_TYPE_D ), param1 ); - brw_RNDD( p, retype( itmp[ 2 ], BRW_REGISTER_TYPE_D ), param2 ); - brw_FRC( p, param0, param0 ); - brw_FRC( p, param1, param1 ); - brw_FRC( p, param2, param2 ); - /* Since we now have only 16 bits of precision in the hash, we must - be more careful about thorough mixing to maintain entropy as we - squash the input vector into a small scalar. */ - brw_MUL( p, brw_null_reg(), low_words( itmp[ 0 ] ), brw_imm_uw( 0xBC8F ) ); - brw_MAC( p, brw_null_reg(), low_words( itmp[ 1 ] ), brw_imm_uw( 0xD0BD ) ); - brw_MAC( p, low_words( itmp[ 0 ] ), low_words( itmp[ 2 ] ), - brw_imm_uw( 0x9B93 ) ); - brw_ADD( p, high_words( itmp[ 0 ] ), low_words( itmp[ 0 ] ), - brw_imm_uw( 0xBC8F ) ); - - /* Temporarily disable the execution mask while we work with ExecSize=16 - channels (the mask is set for ExecSize=8 and is probably incorrect). - Although this might cause execution of unwanted channels, the code - writes only to temporary registers and has no side effects, so - disabling the mask is harmless. */ - brw_push_insn_state( p ); - brw_set_mask_control( p, BRW_MASK_DISABLE ); - brw_ADD( p, wtmp[ 1 ], wtmp[ 0 ], brw_imm_uw( 0xD0BD ) ); - brw_ADD( p, wtmp[ 2 ], wtmp[ 0 ], brw_imm_uw( 0x9B93 ) ); - brw_ADD( p, wtmp[ 3 ], wtmp[ 1 ], brw_imm_uw( 0x9B93 ) ); - - /* We're now ready to perform the hashing. The eight hashes are - interleaved for performance. The hash function used is - designed to rapidly achieve avalanche and require only 16x16 - bit multiplication, and 8-bit swizzles (which we get for - free). */ - for( i = 0; i < 4; i++ ) - brw_MUL( p, wtmp[ i ], wtmp[ i ], brw_imm_uw( 0x28D9 ) ); - for( i = 0; i < 4; i++ ) - brw_XOR( p, even_bytes( wtmp[ i ] ), even_bytes( wtmp[ i ] ), - odd_bytes( wtmp[ i ] ) ); - for( i = 0; i < 4; i++ ) - brw_MUL( p, wtmp[ i ], wtmp[ i ], brw_imm_uw( 0xC6D5 ) ); - for( i = 0; i < 4; i++ ) - brw_XOR( p, even_bytes( wtmp[ i ] ), even_bytes( wtmp[ i ] ), - odd_bytes( wtmp[ i ] ) ); - brw_pop_insn_state( p ); - - /* Now we want to initialise the four rear gradients based on the - hashes. Format conversion from signed integer to float leaves - everything scaled too high by a factor of pow( 2, 15 ), but - we correct for that right at the end. */ - /* x component */ - brw_ADD( p, t, param0, brw_imm_f( -1.0 ) ); - brw_MOV( p, x0y0, low_words( tmp[ 0 ] ) ); - brw_MOV( p, x0y1, low_words( tmp[ 1 ] ) ); - brw_MOV( p, x1y0, high_words( tmp[ 0 ] ) ); - brw_MOV( p, x1y1, high_words( tmp[ 1 ] ) ); - - brw_push_insn_state( p ); - brw_set_mask_control( p, BRW_MASK_DISABLE ); - brw_SHL( p, wtmp[ 0 ], wtmp[ 0 ], brw_imm_uw( 5 ) ); - brw_SHL( p, wtmp[ 1 ], wtmp[ 1 ], brw_imm_uw( 5 ) ); - brw_pop_insn_state( p ); - - brw_MUL( p, x1y0, x1y0, t ); - brw_MUL( p, x1y1, x1y1, t ); - brw_ADD( p, t, param1, brw_imm_f( -1.0 ) ); - brw_MUL( p, x0y0, x0y0, param0 ); - brw_MUL( p, x0y1, x0y1, param0 ); - - /* y component */ - brw_MOV( p, tmp[ 5 ], low_words( tmp[ 1 ] ) ); - brw_MOV( p, tmp[ 7 ], high_words( tmp[ 1 ] ) ); - brw_MOV( p, tmp[ 4 ], low_words( tmp[ 0 ] ) ); - brw_MOV( p, tmp[ 6 ], high_words( tmp[ 0 ] ) ); - - brw_push_insn_state( p ); - brw_set_mask_control( p, BRW_MASK_DISABLE ); - brw_SHL( p, wtmp[ 0 ], wtmp[ 0 ], brw_imm_uw( 5 ) ); - brw_SHL( p, wtmp[ 1 ], wtmp[ 1 ], brw_imm_uw( 5 ) ); - brw_pop_insn_state( p ); - - brw_MUL( p, tmp[ 5 ], tmp[ 5 ], t ); - brw_MUL( p, tmp[ 7 ], tmp[ 7 ], t ); - brw_ADD( p, t, param0, brw_imm_f( -1.0 ) ); - brw_MUL( p, tmp[ 4 ], tmp[ 4 ], param1 ); - brw_MUL( p, tmp[ 6 ], tmp[ 6 ], param1 ); - - brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); - brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); - brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); - brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); - - /* z component */ - brw_MOV( p, tmp[ 4 ], low_words( tmp[ 0 ] ) ); - brw_MOV( p, tmp[ 5 ], low_words( tmp[ 1 ] ) ); - brw_MOV( p, tmp[ 6 ], high_words( tmp[ 0 ] ) ); - brw_MOV( p, tmp[ 7 ], high_words( tmp[ 1 ] ) ); - - brw_MUL( p, tmp[ 4 ], tmp[ 4 ], param2 ); - brw_MUL( p, tmp[ 5 ], tmp[ 5 ], param2 ); - brw_MUL( p, tmp[ 6 ], tmp[ 6 ], param2 ); - brw_MUL( p, tmp[ 7 ], tmp[ 7 ], param2 ); - - brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); - brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); - brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); - brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); - - /* We interpolate between the gradients using the polynomial - 6t^5 - 15t^4 + 10t^3 (Perlin). */ - brw_MUL( p, xi, param0, brw_imm_f( 6.0 ) ); - brw_MUL( p, yi, param1, brw_imm_f( 6.0 ) ); - brw_MUL( p, zi, param2, brw_imm_f( 6.0 ) ); - brw_ADD( p, xi, xi, brw_imm_f( -15.0 ) ); - brw_ADD( p, yi, yi, brw_imm_f( -15.0 ) ); - brw_ADD( p, zi, zi, brw_imm_f( -15.0 ) ); - brw_MUL( p, xi, xi, param0 ); - brw_MUL( p, yi, yi, param1 ); - brw_MUL( p, zi, zi, param2 ); - brw_ADD( p, xi, xi, brw_imm_f( 10.0 ) ); - brw_ADD( p, yi, yi, brw_imm_f( 10.0 ) ); - brw_ADD( p, zi, zi, brw_imm_f( 10.0 ) ); - brw_ADD( p, x0y1, x0y1, negate( x0y0 ) ); /* unrelated work */ - brw_ADD( p, x1y1, x1y1, negate( x1y0 ) ); /* unrelated work */ - brw_MUL( p, xi, xi, param0 ); - brw_MUL( p, yi, yi, param1 ); - brw_MUL( p, zi, zi, param2 ); - brw_MUL( p, xi, xi, param0 ); - brw_MUL( p, yi, yi, param1 ); - brw_MUL( p, zi, zi, param2 ); - brw_MUL( p, xi, xi, param0 ); - brw_MUL( p, yi, yi, param1 ); - brw_MUL( p, zi, zi, param2 ); - - /* Here we interpolate in the y dimension... */ - brw_MUL( p, x0y1, x0y1, yi ); - brw_MUL( p, x1y1, x1y1, yi ); - brw_ADD( p, x0y0, x0y0, x0y1 ); - brw_ADD( p, x1y0, x1y0, x1y1 ); - - /* And now in x. Leave the result in tmp[ 0 ] (see below)... */ - brw_ADD( p, x1y0, x1y0, negate( x0y0 ) ); - brw_MUL( p, x1y0, x1y0, xi ); - brw_ADD( p, tmp[ 0 ], x0y0, x1y0 ); - - /* Now do the same thing for the front four gradients... */ - /* x component */ - brw_MOV( p, x0y0, low_words( tmp[ 2 ] ) ); - brw_MOV( p, x0y1, low_words( tmp[ 3 ] ) ); - brw_MOV( p, x1y0, high_words( tmp[ 2 ] ) ); - brw_MOV( p, x1y1, high_words( tmp[ 3 ] ) ); - - brw_push_insn_state( p ); - brw_set_mask_control( p, BRW_MASK_DISABLE ); - brw_SHL( p, wtmp[ 2 ], wtmp[ 2 ], brw_imm_uw( 5 ) ); - brw_SHL( p, wtmp[ 3 ], wtmp[ 3 ], brw_imm_uw( 5 ) ); - brw_pop_insn_state( p ); - - brw_MUL( p, x1y0, x1y0, t ); - brw_MUL( p, x1y1, x1y1, t ); - brw_ADD( p, t, param1, brw_imm_f( -1.0 ) ); - brw_MUL( p, x0y0, x0y0, param0 ); - brw_MUL( p, x0y1, x0y1, param0 ); - - /* y component */ - brw_MOV( p, tmp[ 5 ], low_words( tmp[ 3 ] ) ); - brw_MOV( p, tmp[ 7 ], high_words( tmp[ 3 ] ) ); - brw_MOV( p, tmp[ 4 ], low_words( tmp[ 2 ] ) ); - brw_MOV( p, tmp[ 6 ], high_words( tmp[ 2 ] ) ); - - brw_push_insn_state( p ); - brw_set_mask_control( p, BRW_MASK_DISABLE ); - brw_SHL( p, wtmp[ 2 ], wtmp[ 2 ], brw_imm_uw( 5 ) ); - brw_SHL( p, wtmp[ 3 ], wtmp[ 3 ], brw_imm_uw( 5 ) ); - brw_pop_insn_state( p ); - - brw_MUL( p, tmp[ 5 ], tmp[ 5 ], t ); - brw_MUL( p, tmp[ 7 ], tmp[ 7 ], t ); - brw_ADD( p, t, param2, brw_imm_f( -1.0 ) ); - brw_MUL( p, tmp[ 4 ], tmp[ 4 ], param1 ); - brw_MUL( p, tmp[ 6 ], tmp[ 6 ], param1 ); - - brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); - brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); - brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); - brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); - - /* z component */ - brw_MOV( p, tmp[ 4 ], low_words( tmp[ 2 ] ) ); - brw_MOV( p, tmp[ 5 ], low_words( tmp[ 3 ] ) ); - brw_MOV( p, tmp[ 6 ], high_words( tmp[ 2 ] ) ); - brw_MOV( p, tmp[ 7 ], high_words( tmp[ 3 ] ) ); - - brw_MUL( p, tmp[ 4 ], tmp[ 4 ], t ); - brw_MUL( p, tmp[ 5 ], tmp[ 5 ], t ); - brw_MUL( p, tmp[ 6 ], tmp[ 6 ], t ); - brw_MUL( p, tmp[ 7 ], tmp[ 7 ], t ); - - brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); - brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); - brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); - brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); - - /* The interpolation coefficients are still around from last time, so - again interpolate in the y dimension... */ - brw_ADD( p, x0y1, x0y1, negate( x0y0 ) ); - brw_ADD( p, x1y1, x1y1, negate( x1y0 ) ); - brw_MUL( p, x0y1, x0y1, yi ); - brw_MUL( p, x1y1, x1y1, yi ); - brw_ADD( p, x0y0, x0y0, x0y1 ); - brw_ADD( p, x1y0, x1y0, x1y1 ); - - /* And now in x. The rear face is in tmp[ 0 ] (see above), so this - time put the front face in tmp[ 1 ] and we're nearly there... */ - brw_ADD( p, x1y0, x1y0, negate( x0y0 ) ); - brw_MUL( p, x1y0, x1y0, xi ); - brw_ADD( p, tmp[ 1 ], x0y0, x1y0 ); - - /* The final interpolation, in the z dimension: */ - brw_ADD( p, tmp[ 1 ], tmp[ 1 ], negate( tmp[ 0 ] ) ); - brw_MUL( p, tmp[ 1 ], tmp[ 1 ], zi ); - brw_ADD( p, tmp[ 0 ], tmp[ 0 ], tmp[ 1 ] ); - - /* scale by pow( 2, -15 ), as described above */ - brw_MUL( p, param0, tmp[ 0 ], brw_imm_f( 0.000030517578125 ) ); - - release_tmps( c, mark ); -} - -static void emit_noise3( struct brw_wm_compile *c, - const struct prog_instruction *inst ) -{ - struct brw_compile *p = &c->func; - struct brw_reg src0, src1, src2, param0, param1, param2, dst; - GLuint mask = inst->DstReg.WriteMask; - int i; - int mark = mark_tmps( c ); - - assert( mark == 0 ); - - src0 = get_src_reg( c, inst, 0, 0 ); - src1 = get_src_reg( c, inst, 0, 1 ); - src2 = get_src_reg( c, inst, 0, 2 ); - - param0 = alloc_tmp( c ); - param1 = alloc_tmp( c ); - param2 = alloc_tmp( c ); - - brw_MOV( p, param0, src0 ); - brw_MOV( p, param1, src1 ); - brw_MOV( p, param2, src2 ); - - invoke_subroutine( c, SUB_NOISE3, noise3_sub ); - - /* Fill in the result: */ - brw_set_saturate( p, inst->SaturateMode == SATURATE_ZERO_ONE ); - for (i = 0 ; i < 4; i++) { - if (mask & (1<<i)) { - dst = get_dst_reg(c, inst, i); - brw_MOV( p, dst, param0 ); - } - } - if( inst->SaturateMode == SATURATE_ZERO_ONE ) - brw_set_saturate( p, 0 ); - - release_tmps( c, mark ); -} - -/** - * For the four-dimensional case, the little micro-optimisation benefits - * we obtain by unrolling all the loops aren't worth the massive bloat it - * now causes. Instead, we loop twice around performing a similar operation - * to noise3, once for the w=0 cube and once for the w=1, with a bit more - * code to glue it all together. - */ -static void noise4_sub( struct brw_wm_compile *c ) -{ - struct brw_compile *p = &c->func; - struct brw_reg param[ 4 ], - x0y0, x0y1, x1y0, x1y1, /* gradients at four of the corners */ - w0, /* noise for the w=0 cube */ - floors[ 2 ], /* integer coordinates of base corner of hypercube */ - interp[ 4 ], /* interpolation coefficients */ - t, tmp[ 8 ], /* float temporaries */ - itmp[ 8 ], /* unsigned integer temporaries (aliases of floats above) */ - wtmp[ 8 ]; /* 16-way unsigned word temporaries (aliases of above) */ - int i, j; - int mark = mark_tmps( c ); - GLuint loop, origin; - - x0y0 = alloc_tmp( c ); - x0y1 = alloc_tmp( c ); - x1y0 = alloc_tmp( c ); - x1y1 = alloc_tmp( c ); - t = alloc_tmp( c ); - w0 = alloc_tmp( c ); - floors[ 0 ] = retype( alloc_tmp( c ), BRW_REGISTER_TYPE_UD ); - floors[ 1 ] = retype( alloc_tmp( c ), BRW_REGISTER_TYPE_UD ); - - for( i = 0; i < 4; i++ ) { - param[ i ] = lookup_tmp( c, mark - 5 + i ); - interp[ i ] = alloc_tmp( c ); - } - - for( i = 0; i < 8; i++ ) { - tmp[ i ] = alloc_tmp( c ); - itmp[ i ] = retype( tmp[ i ], BRW_REGISTER_TYPE_UD ); - wtmp[ i ] = brw_uw16_grf( tmp[ i ].nr, 0 ); - } - - brw_set_access_mode( p, BRW_ALIGN_1 ); - - /* We only want 16 bits of precision from the integral part of each - co-ordinate, but unfortunately the RNDD semantics would saturate - at 16 bits if we performed the operation directly to a 16-bit - destination. Therefore, we round to 32-bit temporaries where - appropriate, and then store only the lower 16 bits. */ - brw_RNDD( p, retype( floors[ 0 ], BRW_REGISTER_TYPE_D ), param[ 0 ] ); - brw_RNDD( p, retype( itmp[ 0 ], BRW_REGISTER_TYPE_D ), param[ 1 ] ); - brw_RNDD( p, retype( floors[ 1 ], BRW_REGISTER_TYPE_D ), param[ 2 ] ); - brw_RNDD( p, retype( itmp[ 1 ], BRW_REGISTER_TYPE_D ), param[ 3 ] ); - brw_MOV( p, high_words( floors[ 0 ] ), low_words( itmp[ 0 ] ) ); - brw_MOV( p, high_words( floors[ 1 ] ), low_words( itmp[ 1 ] ) ); - - /* Modify the flag register here, because the side effect is useful - later (see below). We know for certain that all flags will be - cleared, since the FRC instruction cannot possibly generate - negative results. Even for exceptional inputs (infinities, denormals, - NaNs), the architecture guarantees that the L conditional is false. */ - brw_set_conditionalmod( p, BRW_CONDITIONAL_L ); - brw_FRC( p, param[ 0 ], param[ 0 ] ); - brw_set_predicate_control( p, BRW_PREDICATE_NONE ); - for( i = 1; i < 4; i++ ) - brw_FRC( p, param[ i ], param[ i ] ); - - /* Calculate the interpolation coefficients (6t^5 - 15t^4 + 10t^3) first - of all. */ - for( i = 0; i < 4; i++ ) - brw_MUL( p, interp[ i ], param[ i ], brw_imm_f( 6.0 ) ); - for( i = 0; i < 4; i++ ) - brw_ADD( p, interp[ i ], interp[ i ], brw_imm_f( -15.0 ) ); - for( i = 0; i < 4; i++ ) - brw_MUL( p, interp[ i ], interp[ i ], param[ i ] ); - for( i = 0; i < 4; i++ ) - brw_ADD( p, interp[ i ], interp[ i ], brw_imm_f( 10.0 ) ); - for( j = 0; j < 3; j++ ) - for( i = 0; i < 4; i++ ) - brw_MUL( p, interp[ i ], interp[ i ], param[ i ] ); - - /* Mark the current address, as it will be a jump destination. The - following code will be executed twice: first, with the flag - register clear indicating the w=0 case, and second with flags - set for w=1. */ - loop = p->nr_insn; - - /* Arrange the eight corner coordinates into scalars (itmp0..itmp3) to - be hashed. Since we have only 16 bits of precision in the hash, we - must be careful about thorough mixing to maintain entropy as we - squash the input vector into a small scalar. */ - brw_MUL( p, brw_null_reg(), low_words( floors[ 0 ] ), - brw_imm_uw( 0xBC8F ) ); - brw_MAC( p, brw_null_reg(), high_words( floors[ 0 ] ), - brw_imm_uw( 0xD0BD ) ); - brw_MAC( p, brw_null_reg(), low_words( floors[ 1 ] ), - brw_imm_uw( 0x9B93 ) ); - brw_MAC( p, low_words( itmp[ 0 ] ), high_words( floors[ 1 ] ), - brw_imm_uw( 0xA359 ) ); - brw_ADD( p, high_words( itmp[ 0 ] ), low_words( itmp[ 0 ] ), - brw_imm_uw( 0xBC8F ) ); - - /* Temporarily disable the execution mask while we work with ExecSize=16 - channels (the mask is set for ExecSize=8 and is probably incorrect). - Although this might cause execution of unwanted channels, the code - writes only to temporary registers and has no side effects, so - disabling the mask is harmless. */ - brw_push_insn_state( p ); - brw_set_mask_control( p, BRW_MASK_DISABLE ); - brw_ADD( p, wtmp[ 1 ], wtmp[ 0 ], brw_imm_uw( 0xD0BD ) ); - brw_ADD( p, wtmp[ 2 ], wtmp[ 0 ], brw_imm_uw( 0x9B93 ) ); - brw_ADD( p, wtmp[ 3 ], wtmp[ 1 ], brw_imm_uw( 0x9B93 ) ); - - /* We're now ready to perform the hashing. The eight hashes are - interleaved for performance. The hash function used is - designed to rapidly achieve avalanche and require only 16x16 - bit multiplication, and 8-bit swizzles (which we get for - free). */ - for( i = 0; i < 4; i++ ) - brw_MUL( p, wtmp[ i ], wtmp[ i ], brw_imm_uw( 0x28D9 ) ); - for( i = 0; i < 4; i++ ) - brw_XOR( p, even_bytes( wtmp[ i ] ), even_bytes( wtmp[ i ] ), - odd_bytes( wtmp[ i ] ) ); - for( i = 0; i < 4; i++ ) - brw_MUL( p, wtmp[ i ], wtmp[ i ], brw_imm_uw( 0xC6D5 ) ); - for( i = 0; i < 4; i++ ) - brw_XOR( p, even_bytes( wtmp[ i ] ), even_bytes( wtmp[ i ] ), - odd_bytes( wtmp[ i ] ) ); - brw_pop_insn_state( p ); - - /* Now we want to initialise the four rear gradients based on the - hashes. Format conversion from signed integer to float leaves - everything scaled too high by a factor of pow( 2, 15 ), but - we correct for that right at the end. */ - /* x component */ - brw_ADD( p, t, param[ 0 ], brw_imm_f( -1.0 ) ); - brw_MOV( p, x0y0, low_words( tmp[ 0 ] ) ); - brw_MOV( p, x0y1, low_words( tmp[ 1 ] ) ); - brw_MOV( p, x1y0, high_words( tmp[ 0 ] ) ); - brw_MOV( p, x1y1, high_words( tmp[ 1 ] ) ); - - brw_push_insn_state( p ); - brw_set_mask_control( p, BRW_MASK_DISABLE ); - brw_SHL( p, wtmp[ 0 ], wtmp[ 0 ], brw_imm_uw( 4 ) ); - brw_SHL( p, wtmp[ 1 ], wtmp[ 1 ], brw_imm_uw( 4 ) ); - brw_pop_insn_state( p ); - - brw_MUL( p, x1y0, x1y0, t ); - brw_MUL( p, x1y1, x1y1, t ); - brw_ADD( p, t, param[ 1 ], brw_imm_f( -1.0 ) ); - brw_MUL( p, x0y0, x0y0, param[ 0 ] ); - brw_MUL( p, x0y1, x0y1, param[ 0 ] ); - - /* y component */ - brw_MOV( p, tmp[ 5 ], low_words( tmp[ 1 ] ) ); - brw_MOV( p, tmp[ 7 ], high_words( tmp[ 1 ] ) ); - brw_MOV( p, tmp[ 4 ], low_words( tmp[ 0 ] ) ); - brw_MOV( p, tmp[ 6 ], high_words( tmp[ 0 ] ) ); - - brw_push_insn_state( p ); - brw_set_mask_control( p, BRW_MASK_DISABLE ); - brw_SHL( p, wtmp[ 0 ], wtmp[ 0 ], brw_imm_uw( 4 ) ); - brw_SHL( p, wtmp[ 1 ], wtmp[ 1 ], brw_imm_uw( 4 ) ); - brw_pop_insn_state( p ); - - brw_MUL( p, tmp[ 5 ], tmp[ 5 ], t ); - brw_MUL( p, tmp[ 7 ], tmp[ 7 ], t ); - /* prepare t for the w component (used below): w the first time through - the loop; w - 1 the second time) */ - brw_set_predicate_control( p, BRW_PREDICATE_NORMAL ); - brw_ADD( p, t, param[ 3 ], brw_imm_f( -1.0 ) ); - p->current->header.predicate_inverse = 1; - brw_MOV( p, t, param[ 3 ] ); - p->current->header.predicate_inverse = 0; - brw_set_predicate_control( p, BRW_PREDICATE_NONE ); - brw_MUL( p, tmp[ 4 ], tmp[ 4 ], param[ 1 ] ); - brw_MUL( p, tmp[ 6 ], tmp[ 6 ], param[ 1 ] ); - - brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); - brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); - brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); - brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); - - /* z component */ - brw_MOV( p, tmp[ 4 ], low_words( tmp[ 0 ] ) ); - brw_MOV( p, tmp[ 5 ], low_words( tmp[ 1 ] ) ); - brw_MOV( p, tmp[ 6 ], high_words( tmp[ 0 ] ) ); - brw_MOV( p, tmp[ 7 ], high_words( tmp[ 1 ] ) ); - - brw_push_insn_state( p ); - brw_set_mask_control( p, BRW_MASK_DISABLE ); - brw_SHL( p, wtmp[ 0 ], wtmp[ 0 ], brw_imm_uw( 4 ) ); - brw_SHL( p, wtmp[ 1 ], wtmp[ 1 ], brw_imm_uw( 4 ) ); - brw_pop_insn_state( p ); - - brw_MUL( p, tmp[ 4 ], tmp[ 4 ], param[ 2 ] ); - brw_MUL( p, tmp[ 5 ], tmp[ 5 ], param[ 2 ] ); - brw_MUL( p, tmp[ 6 ], tmp[ 6 ], param[ 2 ] ); - brw_MUL( p, tmp[ 7 ], tmp[ 7 ], param[ 2 ] ); - - brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); - brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); - brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); - brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); - - /* w component */ - brw_MOV( p, tmp[ 4 ], low_words( tmp[ 0 ] ) ); - brw_MOV( p, tmp[ 5 ], low_words( tmp[ 1 ] ) ); - brw_MOV( p, tmp[ 6 ], high_words( tmp[ 0 ] ) ); - brw_MOV( p, tmp[ 7 ], high_words( tmp[ 1 ] ) ); - - brw_MUL( p, tmp[ 4 ], tmp[ 4 ], t ); - brw_MUL( p, tmp[ 5 ], tmp[ 5 ], t ); - brw_MUL( p, tmp[ 6 ], tmp[ 6 ], t ); - brw_MUL( p, tmp[ 7 ], tmp[ 7 ], t ); - brw_ADD( p, t, param[ 0 ], brw_imm_f( -1.0 ) ); - - brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); - brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); - brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); - brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); - - /* Here we interpolate in the y dimension... */ - brw_ADD( p, x0y1, x0y1, negate( x0y0 ) ); - brw_ADD( p, x1y1, x1y1, negate( x1y0 ) ); - brw_MUL( p, x0y1, x0y1, interp[ 1 ] ); - brw_MUL( p, x1y1, x1y1, interp[ 1 ] ); - brw_ADD( p, x0y0, x0y0, x0y1 ); - brw_ADD( p, x1y0, x1y0, x1y1 ); - - /* And now in x. Leave the result in tmp[ 0 ] (see below)... */ - brw_ADD( p, x1y0, x1y0, negate( x0y0 ) ); - brw_MUL( p, x1y0, x1y0, interp[ 0 ] ); - brw_ADD( p, tmp[ 0 ], x0y0, x1y0 ); - - /* Now do the same thing for the front four gradients... */ - /* x component */ - brw_MOV( p, x0y0, low_words( tmp[ 2 ] ) ); - brw_MOV( p, x0y1, low_words( tmp[ 3 ] ) ); - brw_MOV( p, x1y0, high_words( tmp[ 2 ] ) ); - brw_MOV( p, x1y1, high_words( tmp[ 3 ] ) ); - - brw_push_insn_state( p ); - brw_set_mask_control( p, BRW_MASK_DISABLE ); - brw_SHL( p, wtmp[ 2 ], wtmp[ 2 ], brw_imm_uw( 4 ) ); - brw_SHL( p, wtmp[ 3 ], wtmp[ 3 ], brw_imm_uw( 4 ) ); - brw_pop_insn_state( p ); - - brw_MUL( p, x1y0, x1y0, t ); - brw_MUL( p, x1y1, x1y1, t ); - brw_ADD( p, t, param[ 1 ], brw_imm_f( -1.0 ) ); - brw_MUL( p, x0y0, x0y0, param[ 0 ] ); - brw_MUL( p, x0y1, x0y1, param[ 0 ] ); - - /* y component */ - brw_MOV( p, tmp[ 5 ], low_words( tmp[ 3 ] ) ); - brw_MOV( p, tmp[ 7 ], high_words( tmp[ 3 ] ) ); - brw_MOV( p, tmp[ 4 ], low_words( tmp[ 2 ] ) ); - brw_MOV( p, tmp[ 6 ], high_words( tmp[ 2 ] ) ); - - brw_push_insn_state( p ); - brw_set_mask_control( p, BRW_MASK_DISABLE ); - brw_SHL( p, wtmp[ 2 ], wtmp[ 2 ], brw_imm_uw( 4 ) ); - brw_SHL( p, wtmp[ 3 ], wtmp[ 3 ], brw_imm_uw( 4 ) ); - brw_pop_insn_state( p ); - - brw_MUL( p, tmp[ 5 ], tmp[ 5 ], t ); - brw_MUL( p, tmp[ 7 ], tmp[ 7 ], t ); - brw_ADD( p, t, param[ 2 ], brw_imm_f( -1.0 ) ); - brw_MUL( p, tmp[ 4 ], tmp[ 4 ], param[ 1 ] ); - brw_MUL( p, tmp[ 6 ], tmp[ 6 ], param[ 1 ] ); - - brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); - brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); - brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); - brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); - - /* z component */ - brw_MOV( p, tmp[ 4 ], low_words( tmp[ 2 ] ) ); - brw_MOV( p, tmp[ 5 ], low_words( tmp[ 3 ] ) ); - brw_MOV( p, tmp[ 6 ], high_words( tmp[ 2 ] ) ); - brw_MOV( p, tmp[ 7 ], high_words( tmp[ 3 ] ) ); - - brw_push_insn_state( p ); - brw_set_mask_control( p, BRW_MASK_DISABLE ); - brw_SHL( p, wtmp[ 2 ], wtmp[ 2 ], brw_imm_uw( 4 ) ); - brw_SHL( p, wtmp[ 3 ], wtmp[ 3 ], brw_imm_uw( 4 ) ); - brw_pop_insn_state( p ); - - brw_MUL( p, tmp[ 4 ], tmp[ 4 ], t ); - brw_MUL( p, tmp[ 5 ], tmp[ 5 ], t ); - brw_MUL( p, tmp[ 6 ], tmp[ 6 ], t ); - brw_MUL( p, tmp[ 7 ], tmp[ 7 ], t ); - /* prepare t for the w component (used below): w the first time through - the loop; w - 1 the second time) */ - brw_set_predicate_control( p, BRW_PREDICATE_NORMAL ); - brw_ADD( p, t, param[ 3 ], brw_imm_f( -1.0 ) ); - p->current->header.predicate_inverse = 1; - brw_MOV( p, t, param[ 3 ] ); - p->current->header.predicate_inverse = 0; - brw_set_predicate_control( p, BRW_PREDICATE_NONE ); - - brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); - brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); - brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); - brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); - - /* w component */ - brw_MOV( p, tmp[ 4 ], low_words( tmp[ 2 ] ) ); - brw_MOV( p, tmp[ 5 ], low_words( tmp[ 3 ] ) ); - brw_MOV( p, tmp[ 6 ], high_words( tmp[ 2 ] ) ); - brw_MOV( p, tmp[ 7 ], high_words( tmp[ 3 ] ) ); - - brw_MUL( p, tmp[ 4 ], tmp[ 4 ], t ); - brw_MUL( p, tmp[ 5 ], tmp[ 5 ], t ); - brw_MUL( p, tmp[ 6 ], tmp[ 6 ], t ); - brw_MUL( p, tmp[ 7 ], tmp[ 7 ], t ); - - brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); - brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); - brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); - brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); - - /* Interpolate in the y dimension: */ - brw_ADD( p, x0y1, x0y1, negate( x0y0 ) ); - brw_ADD( p, x1y1, x1y1, negate( x1y0 ) ); - brw_MUL( p, x0y1, x0y1, interp[ 1 ] ); - brw_MUL( p, x1y1, x1y1, interp[ 1 ] ); - brw_ADD( p, x0y0, x0y0, x0y1 ); - brw_ADD( p, x1y0, x1y0, x1y1 ); - - /* And now in x. The rear face is in tmp[ 0 ] (see above), so this - time put the front face in tmp[ 1 ] and we're nearly there... */ - brw_ADD( p, x1y0, x1y0, negate( x0y0 ) ); - brw_MUL( p, x1y0, x1y0, interp[ 0 ] ); - brw_ADD( p, tmp[ 1 ], x0y0, x1y0 ); - - /* Another interpolation, in the z dimension: */ - brw_ADD( p, tmp[ 1 ], tmp[ 1 ], negate( tmp[ 0 ] ) ); - brw_MUL( p, tmp[ 1 ], tmp[ 1 ], interp[ 2 ] ); - brw_ADD( p, tmp[ 0 ], tmp[ 0 ], tmp[ 1 ] ); - - /* Exit the loop if we've computed both cubes... */ - origin = p->nr_insn; - brw_push_insn_state( p ); - brw_set_predicate_control( p, BRW_PREDICATE_NORMAL ); - brw_set_mask_control( p, BRW_MASK_DISABLE ); - brw_ADD( p, brw_ip_reg(), brw_ip_reg(), brw_imm_d( 0 ) ); - brw_pop_insn_state( p ); - - /* Save the result for the w=0 case, and increment the w coordinate: */ - brw_MOV( p, w0, tmp[ 0 ] ); - brw_ADD( p, high_words( floors[ 1 ] ), high_words( floors[ 1 ] ), - brw_imm_uw( 1 ) ); - - /* Loop around for the other cube. Explicitly set the flag register - (unfortunately we must spend an extra instruction to do this: we - can't rely on a side effect of the previous MOV or ADD because - conditional modifiers which are normally true might be false in - exceptional circumstances, e.g. given a NaN input; the add to - brw_ip_reg() is not suitable because the IP is not an 8-vector). */ - brw_push_insn_state( p ); - brw_set_mask_control( p, BRW_MASK_DISABLE ); - brw_MOV( p, brw_flag_reg(), brw_imm_uw( 0xFF ) ); - brw_ADD( p, brw_ip_reg(), brw_ip_reg(), - brw_imm_d( ( loop - p->nr_insn ) << 4 ) ); - brw_pop_insn_state( p ); - - /* Patch the previous conditional branch now that we know the - destination address. */ - brw_set_src1( p->store + origin, - brw_imm_d( ( p->nr_insn - origin ) << 4 ) ); - - /* The very last interpolation. */ - brw_ADD( p, tmp[ 0 ], tmp[ 0 ], negate( w0 ) ); - brw_MUL( p, tmp[ 0 ], tmp[ 0 ], interp[ 3 ] ); - brw_ADD( p, tmp[ 0 ], tmp[ 0 ], w0 ); - - /* scale by pow( 2, -15 ), as described above */ - brw_MUL( p, param[ 0 ], tmp[ 0 ], brw_imm_f( 0.000030517578125 ) ); - - release_tmps( c, mark ); -} - -static void emit_noise4( struct brw_wm_compile *c, - const struct prog_instruction *inst ) -{ - struct brw_compile *p = &c->func; - struct brw_reg src0, src1, src2, src3, param0, param1, param2, param3, dst; - GLuint mask = inst->DstReg.WriteMask; - int i; - int mark = mark_tmps( c ); - - assert( mark == 0 ); - - src0 = get_src_reg( c, inst, 0, 0 ); - src1 = get_src_reg( c, inst, 0, 1 ); - src2 = get_src_reg( c, inst, 0, 2 ); - src3 = get_src_reg( c, inst, 0, 3 ); - - param0 = alloc_tmp( c ); - param1 = alloc_tmp( c ); - param2 = alloc_tmp( c ); - param3 = alloc_tmp( c ); - - brw_MOV( p, param0, src0 ); - brw_MOV( p, param1, src1 ); - brw_MOV( p, param2, src2 ); - brw_MOV( p, param3, src3 ); - - invoke_subroutine( c, SUB_NOISE4, noise4_sub ); - - /* Fill in the result: */ - brw_set_saturate( p, inst->SaturateMode == SATURATE_ZERO_ONE ); - for (i = 0 ; i < 4; i++) { - if (mask & (1<<i)) { - dst = get_dst_reg(c, inst, i); - brw_MOV( p, dst, param0 ); - } - } - if( inst->SaturateMode == SATURATE_ZERO_ONE ) - brw_set_saturate( p, 0 ); - - release_tmps( c, mark ); -} static void emit_wpos_xy(struct brw_wm_compile *c, const struct prog_instruction *inst) @@ -2543,19 +1507,18 @@ static void emit_wpos_xy(struct brw_wm_compile *c, * X and Y channels. */ if (mask & WRITEMASK_X) { - /* X' = X - origin_x */ - brw_ADD(p, + /* X' = X */ + brw_MOV(p, dst[0], - retype(src0[0], BRW_REGISTER_TYPE_W), - brw_imm_d(0 - c->key.origin_x)); + retype(src0[0], BRW_REGISTER_TYPE_W)); } if (mask & WRITEMASK_Y) { - /* Y' = height - (Y - origin_y) = height + origin_y - Y */ + /* Y' = height - 1 - Y */ brw_ADD(p, dst[1], negate(retype(src0[1], BRW_REGISTER_TYPE_W)), - brw_imm_d(c->key.origin_y + c->key.drawable_height - 1)); + brw_imm_d(c->key.drawable_height - 1)); } } @@ -2827,7 +1790,6 @@ static void brw_wm_emit_glsl(struct brw_context *brw, struct brw_wm_compile *c) emit_trunc(c, inst); break; case OPCODE_MOV: - case OPCODE_SWZ: emit_mov(c, inst); break; case OPCODE_DP3: @@ -2903,18 +1865,6 @@ static void brw_wm_emit_glsl(struct brw_context *brw, struct brw_wm_compile *c) case OPCODE_MAD: emit_mad(c, inst); break; - case OPCODE_NOISE1: - emit_noise1(c, inst); - break; - case OPCODE_NOISE2: - emit_noise2(c, inst); - break; - case OPCODE_NOISE3: - emit_noise3(c, inst); - break; - case OPCODE_NOISE4: - emit_noise4(c, inst); - break; case OPCODE_TEX: emit_tex(c, inst); break; |