diff options
| -rw-r--r-- | docs/MESA_agp_offset.spec | 94 | ||||
| -rw-r--r-- | docs/MESA_pack_invert.spec | 138 | ||||
| -rw-r--r-- | docs/MESA_ycbcr_texture.spec | 197 |
3 files changed, 429 insertions, 0 deletions
diff --git a/docs/MESA_agp_offset.spec b/docs/MESA_agp_offset.spec new file mode 100644 index 00000000000..f85d44c528a --- /dev/null +++ b/docs/MESA_agp_offset.spec @@ -0,0 +1,94 @@ +Name + + MESA_agp_offset + +Name Strings + + GLX_MESA_agp_offset + +Contact + + Brian Paul, Tungsten Graphics, Inc. (brian 'at' tungstengraphics.com) + Keith Whitwell, Tungsten Graphics, Inc. (keith 'at' tungstengraphics.com) + +Status + + Shipping (Mesa 4.0.4 and later. Only implemented in particular + XFree86/DRI drivers.) + +Version + + 1.0 + +Number + + TBD + +Dependencies + + OpenGL 1.0 or later is required + GLX_NV_vertex_array_range is required. + This extensions is written against the OpenGL 1.4 Specification. + +Overview + + This extensions provides a way to convert pointers in an AGP memory + region into byte offsets into the AGP aperture. + Note, this extension depends on GLX_NV_vertex_array_range, for which + no real specification exists. See GL_NV_vertex_array_range for more + information. + +IP Status + + None + +Issues + + None + +New Procedures and Functions + + GLuint glXGetAGPOffsetMESA( const GLvoid *pointer ) + +New Tokens + + None + +Additions to the OpenGL 1.4 Specification + + None + +Additions to Chapter 3 the GLX 1.4 Specification (Functions and Errors) + + Add a new section, 3.6 as follows: + + 3.6 AGP Memory Access + + On "PC" computers, AGP memory can be allocated with glXAllocateMemoryNV + and freed with glXFreeMemoryNV. Sometimes it's useful to know where a + block of AGP memory is located with respect to the start of the AGP + aperature. The function + + GLuint glXGetAGPOffsetMESA( const GLvoid *pointer ) + + Returns the offset of the given memory block from the start of AGP + memory in basic machine units (i.e. bytes). If pointer is invalid + the value ~0 will be returned. + +GLX Protocol + + None. This is a client side-only extension. + +Errors + + glXGetAGPOffsetMESA will return ~0 if the pointer does not point to + an AGP memory region. + +New State + + None + +Revision History + + 20 September 2002 - Initial draft + 2 October 2002 - finished GLX chapter 3 additions diff --git a/docs/MESA_pack_invert.spec b/docs/MESA_pack_invert.spec new file mode 100644 index 00000000000..81f8c550611 --- /dev/null +++ b/docs/MESA_pack_invert.spec @@ -0,0 +1,138 @@ +Name + + MESA_pack_invert + +Name Strings + + GL_MESA_pack_invert + +Contact + + Brian Paul, Tungsten Graphics, Inc. (brian 'at' tungstengraphics.com) + Keith Whitwell, Tungsten Graphics, Inc. (keith 'at' tungstengraphics.com) + +Status + + Shipping (Mesa 4.0.4 and later) + +Version + + 1.0 + +Number + + TBD + +Dependencies + + OpenGL 1.0 or later is required + This extensions is written against the OpenGL 1.4 Specification. + +Overview + + This extension adds a new pixel storage parameter to indicate that + images are to be packed in top-to-bottom order instead of OpenGL's + conventional bottom-to-top order. Only pixel packing can be + inverted (i.e. for glReadPixels, glGetTexImage, glGetConvolutionFilter, + etc). + + Almost all known image file formats store images in top-to-bottom + order. As it is, OpenGL reads images from the frame buffer in + bottom-to-top order. Thus, images usually have to be inverted before + writing them to a file with image I/O libraries. This extension + allows images to be read such that inverting isn't needed. + +IP Status + + None + +Issues + + 1. Should we also defined UNPACK_INVERT_MESA for glDrawPixels, etc? + + Resolved: No, we're only concerned with pixel packing. There are other + solutions for inverting images when using glDrawPixels (negative Y pixel + zoom) or glTexImage (invert the vertex T coordinates). It would be easy + enough to define a complementary extension for pixel packing in the + future if needed. + +New Procedures and Functions + + None + +New Tokens + + Accepted by the <pname> parameter of PixelStorei and PixelStoref + and the <pname> parameter of GetIntegerv, GetFloatv, GetDoublev + and GetBooleanv: + + PACK_INVERT_MESA 0x8758 + +Additions to Chapter 2 of the OpenGL 1.4 Specification (OpenGL Operation) + + None + +Additions to Chapter 3 of the OpenGL 1.4 Specification (Rasterization) + + None + +Additions to Chapter 4 of the OpenGL 1.4 Specification (Per-Fragment +Operations and the Frame Buffer) + + Add the following entry to table 4.4 (PixelStore parameters) on page 182: + + Parameter Name Type Initial Value Valid Range + --------------------------------------------------------- + PACK_INVERT_MESA boolean FALSE TRUE/FALSE + + In the section labeled "Placement in Client Memory" on page 184 + insert the following text into the paragraph before the sentence + that starts with "If the format is RED, GREEN, BLUE...": + + "The parameter PACK_INVERT_MESA controls whether the image is packed + in bottom-to-top order (the default) or top-to-bottom order. Equation + 3.8 is modified as follows: + + ... the first element of the Nth row is indicated by + + p + Nk, if PACK_INVERT_MESA is false + p + k * (H - 1) - Nk, if PACK_INVERT_MESA is true, where H is the + image height + " + +Additions to Chapter 5 of the OpenGL 1.4 Specification (Special Functions) + + None + +Additions to Chapter 6 of the OpenGL 1.4 Specification (State and +State Requests) + + None + +Additions to Appendix A of the OpenGL 1.4 Specification (Invariance) + + None + +Additions to the AGL/GLX/WGL Specifications + + None + +GLX Protocol + + None + +Errors + + None + +New State + + Add the following entry to table 6.20 (Pixels) on page 235: + + Get Value Type Get Cmd Initial Value Description Sec Attribute + -------------------------------------------------------------------------------------------------- + PACK_INVERT_MESA boolean GetBoolean FALSE Value of PACK_INVERT_MESA 4.3.2 pixel-store + +Revision History + + 21 September 2002 - Initial draft diff --git a/docs/MESA_ycbcr_texture.spec b/docs/MESA_ycbcr_texture.spec new file mode 100644 index 00000000000..a0ef310dc67 --- /dev/null +++ b/docs/MESA_ycbcr_texture.spec @@ -0,0 +1,197 @@ +Name + + MESA_ycbcr_texture + +Name Strings + + GL_MESA_ycbcr_texture + +Contact + + Brian Paul, Tungsten Graphics, Inc. (brian 'at' tungstengraphics.com) + Keith Whitwell, Tungsten Graphics, Inc. (keith 'at' tungstengraphics.com) + +Status + + Shipping (Mesa 4.0.4 and later) + +Version + + 1.0 + +Number + + TBD + +Dependencies + + OpenGL 1.0 or later is required + This extensions is written against the OpenGL 1.4 Specification. + NV_texture_rectangle effects the definition of this extension. + +Overview + + This extension supports texture images in the YCbCr format. There is + no support for converting YCbCr images to RGB or vice versa. The + intention is for YCbCr image data to be directly sent to the renderer + without any pixel transfer operations. Only 2D texture images are + supported (not glDrawPixels, glReadPixels, etc). + + A YCbCr pixel (texel) is a 16-bit unsigned short with two components. + The first component is luminance (Y). For pixels in even-numbered + image columns, the second component is Cb. For pixels in odd-numbered + image columns, the second component is Cr. If one were to convert the + data to RGB one would need to examine two pixels from columns N and N+1 + (where N is even) to deduce the RGB color. + +IP Status + + None + +Issues + + None + +New Procedures and Functions + + None + +New Tokens + + Accepted by the <internalFormat> and <format> parameters of + TexImage2D and TexSubImage2D: + + GL_YCBCR_MESA 0x8757 + + Accepted by the <type> parameter of TexImage2D and TexSubImage2D: + + GL_UNSIGNED_SHORT_8_8_MESA 0x85BA /* same as Apple's */ + GL_UNSIGNED_SHORT_8_8_REV_MESA 0x85BB /* same as Apple's */ + +Additions to Chapter 2 of the OpenGL 1.4 Specification (OpenGL Operation) + + None + +Additions to Chapter 3 of the OpenGL 1.4 Specification (Rasterization) + + In section 3.6.4, Rasterization of Pixel Rectangles, on page 102, + add the following to Table 3.8 (Packed pixel formats): + + type Parameter GL Data Number of Matching + Token Name Type Components Pixel Formats + -------------- ------- ---------- ------------- + UNSIGNED_SHORT_8_8_MESA ushort 3 YCBCR_422_MESA + UNSIGNED_SHORT_8_8_REV_MESA ushort 3 YCBCR_422_MESA + + + In section 3.6.4, Rasterization of Pixel Rectangles, on page 102, + add the following to Table 3.10 (UNSIGNED_SHORT formats): + + UNSIGNED_SHORT_8_8_MESA: + + 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 + +-------------------------------+-------------------------------+ + | 1st | 2nd | + +-------------------------------+-------------------------------+ + + UNSIGNED_SHORT_8_8_REV_MESA: + + 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 + +-------------------------------+-------------------------------+ + | 2nd | 1st | + +-------------------------------+-------------------------------+ + + + In section 3.6.4, Rasterization of Pixel Rectangles, on page 102, + add the following to Table 3.12 (Packed pixel fiedl assignments): + + First Second Third Fourth + Format Element Element Element Element + ------ ------- ------- ------- ------- + YCBCR_422_MESA luminance chroma + + + In section 3.8.1, Texture Image Specification, on page 125, add + another item to the list of TexImage2D and TexImage3D equivalence + exceptions: + + * The value of internalformat and format may be YCBCR_MESA to + indicate that the image data is in YCbCr format. type must + be either UNSIGNED_SHORT_8_8_MESA or UNSIGNED_SHORT_8_8_REV_MESA + as seen in tables 3.8 and 3.10. Table 3.12 describes the mapping + between Y and Cb/Cr to the components. + If NV_texture_rectangle is supported target may also be + TEXTURE_RECTANGLE_NV or PROXY_TEXTURE_RECTANGLE_NV. + All pixel transfer operations are bypassed. The texture is stored as + YCbCr, not RGB. Queries of the texture's red, green and blue component + sizes will return zero. + + + In section 3.8.1, Texture Image Specification, on page 126, add + another item to the list of TexImage1D and TexImage2D equivalence + exceptions: + + * The value of internalformat and format can not be YCBCR_MESA. + + + In section 3.8.2, Alternate Texture Image Specification Commands, on + page 129, insert this paragraph after the first full paragraph on the + page: + + "If the internal storage format of the image being updated by + TexSubImage2D is YCBCR_MESA then format must be YCBCR_MESA. + The error INVALID_OPERATION will be generated otherwise." + + +Additions to Chapter 4 of the OpenGL 1.4 Specification (Per-Fragment +Operations and the Frame Buffer) + + None + +Additions to Chapter 5 of the OpenGL 1.4 Specification (Special Functions) + + None + +Additions to Chapter 6 of the OpenGL 1.4 Specification (State and +State Requests) + + None + +Additions to Appendix A of the OpenGL 1.4 Specification (Invariance) + + None + +Additions to the AGL/GLX/WGL Specifications + + None + +GLX Protocol + + None + +Errors + + INVALID_ENUM is generated by TexImage2D if <internalFormat> is + MESA_YCBCR but <format> is not MESA_YCBCR. + + INVALID_ENUM is generated by TexImage2D if <format> is MESA_YCBCR but + <internalFormat> is not MESA_YCBCR. + + INVALID_VALUE is generated by TexImage2D if <format> is MESA_YCBCR and + <internalFormat> is MESA_YCBCR and <border> is not zero. + + INVALID_OPERATION is generated by TexSubImage2D if the internal image + format is YCBCR_MESA and format is not YCBCR_MESA. + + INVALID_OPERATION is generated by CopyTexSubImage2D if the internal + image is YCBCR_MESA. + +New State + + Edit table 6.16 on page 231: change the type of TEXTURE_INTERNAL_FORMAT + from n x Z42 to n x Z43 to indicate that internal format may also be + YCBCR_MESA. + +Revision History + + 20 September 2002 - Initial draft |