diff options
| -rw-r--r-- | src/gallium/drivers/r300/r300_reg.h | 88 |
1 files changed, 44 insertions, 44 deletions
diff --git a/src/gallium/drivers/r300/r300_reg.h b/src/gallium/drivers/r300/r300_reg.h index 468e0a2e44b..be26b13b0b0 100644 --- a/src/gallium/drivers/r300/r300_reg.h +++ b/src/gallium/drivers/r300/r300_reg.h @@ -64,7 +64,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. #define R300_SE_VPORT_ZSCALE 0x1DA8 #define R300_SE_VPORT_ZOFFSET 0x1DAC - +#define R300_VAP_PORT_IDX0 0x2040 /* * Vertex Array Processing (VAP) Control */ @@ -732,8 +732,8 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. #define R500_RS_IP_TEX_PTR_Q_SHIFT 18 #define R500_RS_IP_COL_PTR_SHIFT 24 #define R500_RS_IP_COL_FMT_SHIFT 27 -# define R500_RS_COL_PTR(x) (x << 24) -# define R500_RS_COL_FMT(x) (x << 27) +# define R500_RS_COL_PTR(x) ((x) << 24) +# define R500_RS_COL_FMT(x) ((x) << 27) /* gap */ #define R500_RS_IP_OFFSET_DIS (0 << 31) #define R500_RS_IP_OFFSET_EN (1 << 31) @@ -1175,8 +1175,8 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_RS_INTERP_SRC_SHIFT 2 /* TODO: check for removal */ # define R300_RS_INTERP_SRC_MASK (7 << 2) /* TODO: check for removal */ # define R300_RS_TEX_PTR(x) (x << 0) -# define R300_RS_COL_PTR(x) (x << 6) -# define R300_RS_COL_FMT(x) (x << 9) +# define R300_RS_COL_PTR(x) ((x) << 6) +# define R300_RS_COL_FMT(x) ((x) << 9) # define R300_RS_COL_FMT_RGBA 0 # define R300_RS_COL_FMT_RGB0 1 # define R300_RS_COL_FMT_RGB1 2 @@ -1186,10 +1186,10 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_RS_COL_FMT_111A 8 # define R300_RS_COL_FMT_1110 9 # define R300_RS_COL_FMT_1111 10 -# define R300_RS_SEL_S(x) (x << 13) -# define R300_RS_SEL_T(x) (x << 16) -# define R300_RS_SEL_R(x) (x << 19) -# define R300_RS_SEL_Q(x) (x << 22) +# define R300_RS_SEL_S(x) ((x) << 13) +# define R300_RS_SEL_T(x) ((x) << 16) +# define R300_RS_SEL_R(x) ((x) << 19) +# define R300_RS_SEL_Q(x) ((x) << 22) # define R300_RS_SEL_C0 0 # define R300_RS_SEL_C1 1 # define R300_RS_SEL_C2 2 @@ -1708,7 +1708,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_C3_SEL_R (1 << 14) # define R300_C3_SEL_G (2 << 14) # define R300_C3_SEL_B (3 << 14) -# define R300_OUT_SIGN(x) (x << 16) +# define R300_OUT_SIGN(x) ((x) << 16) # define R500_ROUND_ADJ (1 << 20) /* ALU @@ -2732,7 +2732,7 @@ enum { # define R500_ALPHA_OP_COS 13 # define R500_ALPHA_OP_MDH 14 # define R500_ALPHA_OP_MDV 15 -# define R500_ALPHA_ADDRD(x) (x << 4) +# define R500_ALPHA_ADDRD(x) ((x) << 4) # define R500_ALPHA_ADDRD_REL (1 << 11) # define R500_ALPHA_SEL_A_SHIFT 12 # define R500_ALPHA_SEL_A_SRC0 (0 << 12) @@ -2776,16 +2776,16 @@ enum { # define R500_ALPHA_OMOD_DIV_4 (5 << 26) # define R500_ALPHA_OMOD_DIV_8 (6 << 26) # define R500_ALPHA_OMOD_DISABLE (7 << 26) -# define R500_ALPHA_TARGET(x) (x << 29) +# define R500_ALPHA_TARGET(x) ((x) << 29) # define R500_ALPHA_W_OMASK (1 << 31) #define R500_US_ALU_ALPHA_ADDR_0 0x9800 -# define R500_ALPHA_ADDR0(x) (x << 0) +# define R500_ALPHA_ADDR0(x) ((x) << 0) # define R500_ALPHA_ADDR0_CONST (1 << 8) # define R500_ALPHA_ADDR0_REL (1 << 9) -# define R500_ALPHA_ADDR1(x) (x << 10) +# define R500_ALPHA_ADDR1(x) ((x) << 10) # define R500_ALPHA_ADDR1_CONST (1 << 18) # define R500_ALPHA_ADDR1_REL (1 << 19) -# define R500_ALPHA_ADDR2(x) (x << 20) +# define R500_ALPHA_ADDR2(x) ((x) << 20) # define R500_ALPHA_ADDR2_CONST (1 << 28) # define R500_ALPHA_ADDR2_REL (1 << 29) # define R500_ALPHA_SRCP_OP_1_MINUS_2A0 (0 << 30) @@ -2806,7 +2806,7 @@ enum { # define R500_ALU_RGBA_OP_SOP (10 << 0) # define R500_ALU_RGBA_OP_MDH (11 << 0) # define R500_ALU_RGBA_OP_MDV (12 << 0) -# define R500_ALU_RGBA_ADDRD(x) (x << 4) +# define R500_ALU_RGBA_ADDRD(x) ((x) << 4) # define R500_ALU_RGBA_ADDRD_REL (1 << 11) # define R500_ALU_RGBA_SEL_C_SHIFT 12 # define R500_ALU_RGBA_SEL_C_SRC0 (0 << 12) @@ -2933,16 +2933,16 @@ enum { # define R500_ALU_RGB_OMOD_DIV_4 (5 << 26) # define R500_ALU_RGB_OMOD_DIV_8 (6 << 26) # define R500_ALU_RGB_OMOD_DISABLE (7 << 26) -# define R500_ALU_RGB_TARGET(x) (x << 29) +# define R500_ALU_RGB_TARGET(x) ((x) << 29) # define R500_ALU_RGB_WMASK (1 << 31) #define R500_US_ALU_RGB_ADDR_0 0x9000 -# define R500_RGB_ADDR0(x) (x << 0) +# define R500_RGB_ADDR0(x) ((x) << 0) # define R500_RGB_ADDR0_CONST (1 << 8) # define R500_RGB_ADDR0_REL (1 << 9) -# define R500_RGB_ADDR1(x) (x << 10) +# define R500_RGB_ADDR1(x) ((x) << 10) # define R500_RGB_ADDR1_CONST (1 << 18) # define R500_RGB_ADDR1_REL (1 << 19) -# define R500_RGB_ADDR2(x) (x << 20) +# define R500_RGB_ADDR2(x) ((x) << 20) # define R500_RGB_ADDR2_CONST (1 << 28) # define R500_RGB_ADDR2_REL (1 << 29) # define R500_RGB_SRCP_OP_1_MINUS_2RGB0 (0 << 30) @@ -2998,19 +2998,19 @@ enum { /* note that these are 8 bit lengths, despite the offsets, at least for R500 */ #define R500_US_CODE_ADDR 0x4630 -# define R500_US_CODE_START_ADDR(x) (x << 0) -# define R500_US_CODE_END_ADDR(x) (x << 16) +# define R500_US_CODE_START_ADDR(x) ((x) << 0) +# define R500_US_CODE_END_ADDR(x) ((x) << 16) #define R500_US_CODE_OFFSET 0x4638 -# define R500_US_CODE_OFFSET_ADDR(x) (x << 0) +# define R500_US_CODE_OFFSET_ADDR(x) ((x) << 0) #define R500_US_CODE_RANGE 0x4634 -# define R500_US_CODE_RANGE_ADDR(x) (x << 0) -# define R500_US_CODE_RANGE_SIZE(x) (x << 16) +# define R500_US_CODE_RANGE_ADDR(x) ((x) << 0) +# define R500_US_CODE_RANGE_SIZE(x) ((x) << 16) #define R500_US_CONFIG 0x4600 # define R500_ZERO_TIMES_ANYTHING_EQUALS_ZERO (1 << 1) #define R500_US_FC_ADDR_0 0xa000 -# define R500_FC_BOOL_ADDR(x) (x << 0) -# define R500_FC_INT_ADDR(x) (x << 8) -# define R500_FC_JUMP_ADDR(x) (x << 16) +# define R500_FC_BOOL_ADDR(x) ((x) << 0) +# define R500_FC_INT_ADDR(x) ((x) << 8) +# define R500_FC_JUMP_ADDR(x) ((x) << 16) # define R500_FC_JUMP_GLOBAL (1 << 31) #define R500_US_FC_BOOL_CONST 0x4620 # define R500_FC_KBOOL(x) (x) @@ -3031,8 +3031,8 @@ enum { # define R500_FC_A_OP_NONE (0 << 6) # define R500_FC_A_OP_POP (1 << 6) # define R500_FC_A_OP_PUSH (2 << 6) -# define R500_FC_JUMP_FUNC(x) (x << 8) -# define R500_FC_B_POP_CNT(x) (x << 16) +# define R500_FC_JUMP_FUNC(x) ((x) << 8) +# define R500_FC_B_POP_CNT(x) ((x) << 16) # define R500_FC_B_OP0_NONE (0 << 24) # define R500_FC_B_OP0_DECR (1 << 24) # define R500_FC_B_OP0_INCR (2 << 24) @@ -3041,18 +3041,18 @@ enum { # define R500_FC_B_OP1_INCR (2 << 26) # define R500_FC_IGNORE_UNCOVERED (1 << 28) #define R500_US_FC_INT_CONST_0 0x4c00 -# define R500_FC_INT_CONST_KR(x) (x << 0) -# define R500_FC_INT_CONST_KG(x) (x << 8) -# define R500_FC_INT_CONST_KB(x) (x << 16) +# define R500_FC_INT_CONST_KR(x) ((x) << 0) +# define R500_FC_INT_CONST_KG(x) ((x) << 8) +# define R500_FC_INT_CONST_KB(x) ((x) << 16) /* _0 through _15 */ #define R500_US_FORMAT0_0 0x4640 -# define R500_FORMAT_TXWIDTH(x) (x << 0) -# define R500_FORMAT_TXHEIGHT(x) (x << 11) -# define R500_FORMAT_TXDEPTH(x) (x << 22) +# define R500_FORMAT_TXWIDTH(x) ((x) << 0) +# define R500_FORMAT_TXHEIGHT(x) ((x) << 11) +# define R500_FORMAT_TXDEPTH(x) ((x) << 22) #define R500_US_PIXSIZE 0x4604 # define R500_PIX_SIZE(x) (x) #define R500_US_TEX_ADDR_0 0x9800 -# define R500_TEX_SRC_ADDR(x) (x << 0) +# define R500_TEX_SRC_ADDR(x) ((x) << 0) # define R500_TEX_SRC_ADDR_REL (1 << 7) # define R500_TEX_SRC_S_SWIZ_R (0 << 8) # define R500_TEX_SRC_S_SWIZ_G (1 << 8) @@ -3070,7 +3070,7 @@ enum { # define R500_TEX_SRC_Q_SWIZ_G (1 << 14) # define R500_TEX_SRC_Q_SWIZ_B (2 << 14) # define R500_TEX_SRC_Q_SWIZ_A (3 << 14) -# define R500_TEX_DST_ADDR(x) (x << 16) +# define R500_TEX_DST_ADDR(x) ((x) << 16) # define R500_TEX_DST_ADDR_REL (1 << 23) # define R500_TEX_DST_R_SWIZ_R (0 << 24) # define R500_TEX_DST_R_SWIZ_G (1 << 24) @@ -3089,7 +3089,7 @@ enum { # define R500_TEX_DST_A_SWIZ_B (2 << 30) # define R500_TEX_DST_A_SWIZ_A (3 << 30) #define R500_US_TEX_ADDR_DXDY_0 0xa000 -# define R500_DX_ADDR(x) (x << 0) +# define R500_DX_ADDR(x) ((x) << 0) # define R500_DX_ADDR_REL (1 << 7) # define R500_DX_S_SWIZ_R (0 << 8) # define R500_DX_S_SWIZ_G (1 << 8) @@ -3107,7 +3107,7 @@ enum { # define R500_DX_Q_SWIZ_G (1 << 14) # define R500_DX_Q_SWIZ_B (2 << 14) # define R500_DX_Q_SWIZ_A (3 << 14) -# define R500_DY_ADDR(x) (x << 16) +# define R500_DY_ADDR(x) ((x) << 16) # define R500_DY_ADDR_REL (1 << 17) # define R500_DY_S_SWIZ_R (0 << 24) # define R500_DY_S_SWIZ_G (1 << 24) @@ -3126,7 +3126,7 @@ enum { # define R500_DY_Q_SWIZ_B (2 << 30) # define R500_DY_Q_SWIZ_A (3 << 30) #define R500_US_TEX_INST_0 0x9000 -# define R500_TEX_ID(x) (x << 16) +# define R500_TEX_ID(x) ((x) << 16) # define R500_TEX_INST_NOP (0 << 22) # define R500_TEX_INST_LD (1 << 22) # define R500_TEX_INST_TEXKILL (2 << 22) @@ -3187,9 +3187,9 @@ enum { #define R300_PACKET3_3D_LOAD_VBPNTR 0x00002F00 #define R300_PACKET3_INDX_BUFFER 0x00003300 -# define R300_EB_UNK1_SHIFT 24 -# define R300_EB_UNK1 (0x80<<24) -# define R300_EB_UNK2 0x0810 +# define R300_INDX_BUFFER_DST_SHIFT 0 +# define R300_INDX_BUFFER_SKIP_SHIFT 16 +# define R300_INDX_BUFFER_ONE_REG_WR (1<<31) /* Same as R300_PACKET3_3D_DRAW_VBUF but without VAP_VTX_FMT */ #define R300_PACKET3_3D_DRAW_VBUF_2 0x00003400 |