freedreno/a4xx: bit of cleanup

Signed-off-by: Rob Clark <[email protected]>
(cherry picked from commit bdf023482a6fd07adef090fb66a4aaaac22810fc)

4 files changed, 27 insertions, 33 deletions

diff --git a/src/gallium/drivers/freedreno/a3xx/fd3_program.c b/src/gallium/drivers/freedreno/a3xx/fd3_program.c
index db729434974..b6c448e8650 100644
--- a/src/gallium/drivers/freedreno/a3xx/fd3_program.c
+++ b/src/gallium/drivers/freedreno/a3xx/fd3_program.c
@@ -365,7 +365,10 @@ fd3_program_emit(struct fd_ringbuffer *ring, struct fd3_emit *emit)
 				COND(vp->writes_psize, A3XX_VPC_ATTR_PSIZE));
 		OUT_RING(ring, 0x00000000);
 	} else {
-		uint32_t vinterp[4] = {0}, flatshade[2] = {0};
+		uint32_t vinterp[4], flatshade[2];
+
+		memset(vinterp, 0, sizeof(vinterp));
+		memset(flatshade, 0, sizeof(flatshade));
 
 		/* figure out VARYING_INTERP / FLAT_SHAD register values: */
 		for (j = -1; (j = ir3_next_varying(fp, j)) < (int)fp->inputs_count; ) {
diff --git a/src/gallium/drivers/freedreno/a4xx/fd4_emit.c b/src/gallium/drivers/freedreno/a4xx/fd4_emit.c
index 037f4550587..1d098f2701f 100644
--- a/src/gallium/drivers/freedreno/a4xx/fd4_emit.c
+++ b/src/gallium/drivers/freedreno/a4xx/fd4_emit.c
@@ -425,13 +425,9 @@ fd4_emit_state(struct fd_context *ctx, struct fd_ringbuffer *ring,
 		OUT_PKT0(ring, REG_A4XX_GRAS_SU_POLY_OFFSET_SCALE, 2);
 		OUT_RING(ring, rasterizer->gras_su_poly_offset_scale);
 		OUT_RING(ring, rasterizer->gras_su_poly_offset_offset);
-	}
 
-	if (dirty & (FD_DIRTY_RASTERIZER | FD_DIRTY_PROG)) {
-		uint32_t val = fd4_rasterizer_stateobj(ctx->rasterizer)
-				->gras_cl_clip_cntl;
 		OUT_PKT0(ring, REG_A4XX_GRAS_CL_CLIP_CNTL, 1);
-		OUT_RING(ring, val);
+		OUT_RING(ring, rasterizer->gras_cl_clip_cntl);
 	}
 
 	/* NOTE: since primitive_restart is not actually part of any
diff --git a/src/gallium/drivers/freedreno/a4xx/fd4_gmem.c b/src/gallium/drivers/freedreno/a4xx/fd4_gmem.c
index f4ab9103c81..c52fa997191 100644
--- a/src/gallium/drivers/freedreno/a4xx/fd4_gmem.c
+++ b/src/gallium/drivers/freedreno/a4xx/fd4_gmem.c
@@ -436,13 +436,6 @@ fd4_emit_sysmem_prep(struct fd_context *ctx)
 {
 	struct pipe_framebuffer_state *pfb = &ctx->framebuffer;
 	struct fd_ringbuffer *ring = ctx->ring;
-	uint32_t pitch = 0;
-
-	if (pfb->cbufs[0]) {
-		struct pipe_surface *psurf = pfb->cbufs[0];
-		unsigned lvl = psurf->u.tex.level;
-		pitch = fd_resource(psurf->texture)->slices[lvl].pitch;
-	}
 
 	fd4_emit_restore(ctx);
 
diff --git a/src/gallium/drivers/freedreno/a4xx/fd4_program.c b/src/gallium/drivers/freedreno/a4xx/fd4_program.c
index cbfd8b2d4cc..776e4a16b14 100644
--- a/src/gallium/drivers/freedreno/a4xx/fd4_program.c
+++ b/src/gallium/drivers/freedreno/a4xx/fd4_program.c
@@ -420,8 +420,28 @@ fd4_program_emit(struct fd_ringbuffer *ring, struct fd4_emit *emit)
 				COND(s[VS].v->writes_psize, A4XX_VPC_ATTR_PSIZE));
 		OUT_RING(ring, 0x00000000);
 	} else {
-		uint32_t vinterp[8] = {0}, flatshade[2] = {0};
+		uint32_t vinterp[8], flatshade[2];
 
+		memset(vinterp, 0, sizeof(vinterp));
+		memset(flatshade, 0, sizeof(flatshade));
+
+		/* TODO: looks like we need to do int varyings in the frag
+		 * shader on a4xx (no flatshad reg?):
+		 *
+		 *    (sy)(ss)nop
+		 *    (sy)ldlv.u32 r0.x,l[r0.x], 1
+		 *    ldlv.u32 r0.y,l[r0.x+1], 1
+		 *    (ss)bary.f (ei)r63.x, 0, r0.x
+		 *    (ss)(rpt1)cov.s32f16 hr0.x, (r)r0.x
+		 *    (rpt5)nop
+		 *    sam (f16)(xyzw)hr0.x, hr0.x, s#0, t#0
+		 *
+		 * for now, don't set FLAT on vinterp[], since that
+		 * at least works well enough for pure float impl (ie.
+		 * pre glsl130).. we'll have to do a bit more work to
+		 * handle this properly:
+		 */
+#if 0
 		/* figure out VARYING_INTERP / FLAT_SHAD register values: */
 		for (j = -1; (j = ir3_next_varying(s[FS].v, j)) < (int)s[FS].v->inputs_count; ) {
 			uint32_t interp = s[FS].v->inputs[j].interpolate;
@@ -443,25 +463,7 @@ fd4_program_emit(struct fd_ringbuffer *ring, struct fd4_emit *emit)
 				}
 			}
 		}
-
-		/* HACK: looks like we need to do int varyings in the frag
-		 * shader on a4xx (no flatshad reg?):
-		 *
-		 *    (sy)(ss)nop
-		 *    (sy)ldlv.u32 r0.x,l[r0.x], 1
-		 *    ldlv.u32 r0.y,l[r0.x+1], 1
-		 *    (ss)bary.f (ei)r63.x, 0, r0.x
-		 *    (ss)(rpt1)cov.s32f16 hr0.x, (r)r0.x
-		 *    (rpt5)nop
-		 *    sam (f16)(xyzw)hr0.x, hr0.x, s#0, t#0
-		 *
-		 * for now, don't set FLAT on vinterp[], since that
-		 * at least works well enough for pure float impl (ie.
-		 * pre glsl130).. we'll have to do a bit more work to
-		 * handle this properly:
-		 */
-		for (i = 0; i < ARRAY_SIZE(vinterp); i++)
-			vinterp[i] = 0;
+#endif
 
 		OUT_PKT0(ring, REG_A4XX_VPC_ATTR, 2);
 		OUT_RING(ring, A4XX_VPC_ATTR_TOTALATTR(s[FS].v->total_in) |