i965/brw: Emit state for hiz and separate stencil buffers

When emitting 3DSTATE_DEPTH_BUFFER, also emit 3DSTATE_HIER_DEPTH_BUFFER if
there is a hiz buffer. Ditto for 3DSTATE_STENCIL_BUFFER and a separate
stencil buffer.

Reviewed-by: Eric Anholt <[email protected]>
Reviewed-by: Kenneth Graunke <[email protected]>
Signed-off-by: Chad Versace <[email protected]>

2 files changed, 107 insertions, 9 deletions

diff --git a/src/mesa/drivers/dri/i965/brw_misc_state.c b/src/mesa/drivers/dri/i965/brw_misc_state.c
index 3ec90096212..4256234a645 100644
--- a/src/mesa/drivers/dri/i965/brw_misc_state.c
+++ b/src/mesa/drivers/dri/i965/brw_misc_state.c
@@ -202,6 +202,8 @@ static void prepare_depthbuffer(struct brw_context *brw)
 
    if (drb)
       brw_add_validated_bo(brw, drb->region->buffer);
+   if (drb && drb->hiz_region)
+      brw_add_validated_bo(brw, drb->hiz_region->buffer);
    if (srb)
       brw_add_validated_bo(brw, srb->region->buffer);
 }
@@ -212,14 +214,28 @@ static void emit_depthbuffer(struct brw_context *brw)
    struct gl_context *ctx = &intel->ctx;
    struct gl_framebuffer *fb = ctx->DrawBuffer;
    /* _NEW_BUFFERS */
-   struct intel_renderbuffer *irb = intel_get_renderbuffer(fb, BUFFER_DEPTH);
+   struct intel_renderbuffer *depth_irb = intel_get_renderbuffer(fb, BUFFER_DEPTH);
+   struct intel_renderbuffer *stencil_irb = intel_get_renderbuffer(fb, BUFFER_STENCIL);
+   struct intel_region *hiz_region = depth_irb ? depth_irb->hiz_region : NULL;
    unsigned int len;
 
-   /* If we're combined depth stencil but no depth is attached, look
-    * up stencil.
+   /*
+    * If depth and stencil buffers are identical, then don't use separate
+    * stencil.
     */
-   if (!irb)
-      irb = intel_get_renderbuffer(fb, BUFFER_STENCIL);
+   if (depth_irb && depth_irb == stencil_irb) {
+      stencil_irb = NULL;
+   }
+
+   /*
+    * If stencil buffer uses combined depth/stencil format, but no depth buffer
+    * is attached, then use stencil buffer as depth buffer.
+    */
+   if (!depth_irb && stencil_irb
+       && stencil_irb->Base.Format == MESA_FORMAT_S8_Z24) {
+      depth_irb = stencil_irb;
+      stencil_irb = NULL;
+   }
 
    if (intel->gen >= 6)
       len = 7;
@@ -228,7 +244,7 @@ static void emit_depthbuffer(struct brw_context *brw)
    else
       len = 5;
 
-   if (!irb) {
+   if (!depth_irb && !stencil_irb) {
       BEGIN_BATCH(len);
       OUT_BATCH(_3DSTATE_DEPTH_BUFFER << 16 | (len - 2));
       OUT_BATCH((BRW_DEPTHFORMAT_D32_FLOAT << 18) |
@@ -244,11 +260,57 @@ static void emit_depthbuffer(struct brw_context *brw)
 	 OUT_BATCH(0);
 
       ADVANCE_BATCH();
+
+   } else if (!depth_irb && stencil_irb) {
+      /*
+       * There exists a separate stencil buffer but no depth buffer.
+       *
+       * The stencil buffer inherits most of its fields from
+       * 3DSTATE_DEPTH_BUFFER: namely the tile walk, surface type, width, and
+       * height.
+       *
+       * Since the stencil buffer has quirky pitch requirements, its region
+       * was allocated with half height and double cpp. So we need
+       * a multiplier of 2 to obtain the surface's real height.
+       *
+       * Enable the hiz bit because it and the separate stencil bit must have
+       * the same value. From Section 2.11.5.6.1.1 3DSTATE_DEPTH_BUFFER, Bit
+       * 1.21 "Separate Stencil Enable":
+       *     [DevIL]: If this field is enabled, Hierarchical Depth Buffer
+       *     Enable must also be enabled.
+       *
+       *     [DevGT]: This field must be set to the same value (enabled or
+       *     disabled) as Hierarchical Depth Buffer Enable
+       */
+      assert(intel->has_separate_stencil);
+      assert(stencil_irb->Base.Format == MESA_FORMAT_S8);
+
+      BEGIN_BATCH(len);
+      OUT_BATCH(_3DSTATE_DEPTH_BUFFER << 16 | (len - 2));
+      OUT_BATCH((BRW_DEPTHFORMAT_D32_FLOAT << 18) |
+	        (1 << 21) | /* separate stencil enable */
+	        (1 << 22) | /* hiz enable */
+	        (BRW_TILEWALK_YMAJOR << 26) |
+	        (BRW_SURFACE_2D << 29));
+      OUT_BATCH(0);
+      OUT_BATCH(((stencil_irb->region->width - 1) << 6) |
+	         (2 * stencil_irb->region->height - 1) << 19);
+      OUT_BATCH(0);
+      OUT_BATCH(0);
+
+      if (intel->gen >= 6)
+	 OUT_BATCH(0);
+
+      ADVANCE_BATCH();
+
    } else {
-      struct intel_region *region = irb->region;
+      struct intel_region *region = depth_irb->region;
       unsigned int format;
       uint32_t tile_x, tile_y, offset;
 
+      /* If using separate stencil, hiz must be enabled. */
+      assert(!stencil_irb || hiz_region);
+
       switch (region->cpp) {
       case 2:
 	 format = BRW_DEPTHFORMAT_D16_UNORM;
@@ -256,6 +318,8 @@ static void emit_depthbuffer(struct brw_context *brw)
       case 4:
 	 if (intel->depth_buffer_is_float)
 	    format = BRW_DEPTHFORMAT_D32_FLOAT;
+	 else if (hiz_region)
+	    format = BRW_DEPTHFORMAT_D24_UNORM_X8_UINT;
 	 else
 	    format = BRW_DEPTHFORMAT_D24_UNORM_S8_UINT;
 	 break;
@@ -267,11 +331,14 @@ static void emit_depthbuffer(struct brw_context *brw)
       offset = intel_region_tile_offsets(region, &tile_x, &tile_y);
 
       assert(intel->gen < 6 || region->tiling == I915_TILING_Y);
+      assert(!hiz_region || region->tiling == I915_TILING_Y);
 
       BEGIN_BATCH(len);
       OUT_BATCH(_3DSTATE_DEPTH_BUFFER << 16 | (len - 2));
       OUT_BATCH(((region->pitch * region->cpp) - 1) |
 		(format << 18) |
+		((hiz_region ? 1 : 0) << 21) | /* separate stencil enable */
+		((hiz_region ? 1 : 0) << 22) | /* hiz enable */
 		(BRW_TILEWALK_YMAJOR << 26) |
 		((region->tiling != I915_TILING_NONE) << 27) |
 		(BRW_SURFACE_2D << 29));
@@ -294,8 +361,37 @@ static void emit_depthbuffer(struct brw_context *brw)
       ADVANCE_BATCH();
    }
 
-   /* Initialize it for safety. */
-   if (intel->gen >= 6) {
+   /* Emit hiz buffer. */
+   if (hiz_region || stencil_irb) {
+      BEGIN_BATCH(3);
+      OUT_BATCH((_3DSTATE_HIER_DEPTH_BUFFER << 16) | (3 - 2));
+      OUT_BATCH(hiz_region->pitch * hiz_region->cpp - 1);
+      OUT_RELOC(hiz_region->buffer,
+		I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER,
+		0);
+      ADVANCE_BATCH();
+   }
+
+   /* Emit stencil buffer. */
+   if (hiz_region || stencil_irb) {
+      BEGIN_BATCH(3);
+      OUT_BATCH((_3DSTATE_STENCIL_BUFFER << 16) | (3 - 2));
+      OUT_BATCH(stencil_irb->region->pitch * stencil_irb->region->cpp - 1);
+      OUT_RELOC(stencil_irb->region->buffer,
+		I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER,
+		0);
+      ADVANCE_BATCH();
+   }
+
+   /*
+    * On Gen >= 6, emit clear params for safety. If using hiz, then clear
+    * params must be emitted.
+    *
+    * From Section 2.11.5.6.4.1 3DSTATE_CLEAR_PARAMS:
+    *     3DSTATE_CLEAR_PARAMS packet must follow the DEPTH_BUFFER_STATE packet
+    *     when HiZ is enabled and the DEPTH_BUFFER_STATE changes.
+    */
+   if (intel->gen >= 6 || hiz_region) {
       BEGIN_BATCH(2);
       OUT_BATCH(_3DSTATE_CLEAR_PARAMS << 16 | (2 - 2));
       OUT_BATCH(0);
diff --git a/src/mesa/drivers/dri/i965/brw_wm_surface_state.c b/src/mesa/drivers/dri/i965/brw_wm_surface_state.c
index 6c1eba69d4b..f560bc3fa66 100644
--- a/src/mesa/drivers/dri/i965/brw_wm_surface_state.c
+++ b/src/mesa/drivers/dri/i965/brw_wm_surface_state.c
@@ -134,6 +134,7 @@ brw_render_target_supported(gl_format format)
     */
    if (format == MESA_FORMAT_S8_Z24 ||
        format == MESA_FORMAT_X8_Z24 ||
+       format == MESA_FORMAT_S8 ||
        format == MESA_FORMAT_Z16) {
       return true;
    }
@@ -168,6 +169,7 @@ translate_tex_format(gl_format mesa_format,
 	  return BRW_SURFACEFORMAT_L16_UNORM;
 
    case MESA_FORMAT_S8_Z24:
+   case MESA_FORMAT_X8_Z24:
       /* XXX: these different surface formats don't seem to
        * make any difference for shadow sampler/compares.
        */