Polygon mode fixes.

3 files changed, 81 insertions, 120 deletions

diff --git a/src/mesa/drivers/dri/r300/r300_reg.h b/src/mesa/drivers/dri/r300/r300_reg.h
index 040e69517b5..70fbd2fe45f 100644
--- a/src/mesa/drivers/dri/r300/r300_reg.h
+++ b/src/mesa/drivers/dri/r300/r300_reg.h
@@ -430,12 +430,17 @@ I am fairly certain that they are correct unless stated otherwise in comments.
 #       define R300_POINTSIZE_MAX             (R300_POINTSIZE_Y_MASK / 6)
 
 /* The line width is given in multiples of 6.
-   R300_LINE_CNT_UNK1 must be on to obtain expected results. */
+   In default mode lines are classified as vertical lines.
+   HO: horizontal
+   VE: vertical or horizontal
+   HO & VE: no classification
+*/
 #define R300_RE_LINE_CNT                      0x4234
 #       define R300_LINESIZE_SHIFT            0
 #       define R300_LINESIZE_MASK             (0xFFFF << 0) /* GUESS */
 #       define R300_LINESIZE_MAX             (R300_LINESIZE_MASK / 6)
-#       define R300_LINE_CNT_UNK1           (1 << 17)
+#       define R300_LINE_CNT_HO               (1 << 16)
+#       define R300_LINE_CNT_VE               (1 << 17)
 
 /* Linestipple factor. 3a088889 == 1.0, 3baaaaa9 == 10.0 */
 #define R300_RE_LINE_STIPPLE_FACTOR           0x4238
@@ -444,8 +449,15 @@ I am fairly certain that they are correct unless stated otherwise in comments.
 #	define R300_RE_SHADE_MODEL_SMOOTH     0x3aaaa
 #	define R300_RE_SHADE_MODEL_FLAT       0x39595
 
-
+/* Dangerous */
 #define R300_RE_POLYGON_MODE                  0x4288
+#	define R300_PM_ENABLED                (1 << 0)
+#	define R300_PM_FRONT_POINT            (0 << 0)
+#	define R300_PM_BACK_POINT             (0 << 0)
+#	define R300_PM_FRONT_LINE             (1 << 4)
+#	define R300_PM_FRONT_FILL             (1 << 5)
+#	define R300_PM_BACK_LINE              (1 << 7)
+#	define R300_PM_BACK_FILL              (1 << 8)
 
 /* Not sure why there are duplicate of factor and constant values. 
    My best guess so far is that there are seperate zbiases for test and write. 
@@ -649,6 +661,7 @@ I am fairly certain that they are correct unless stated otherwise in comments.
 #       define R300_TX_WIDTHMASK_MASK            (2047 << 0)
 #       define R300_TX_HEIGHTMASK_SHIFT          11
 #       define R300_TX_HEIGHTMASK_MASK           (2047 << 11)
+#       define R300_TX_UNK23                     (1 << 23)
 #       define R300_TX_SIZE_SHIFT                26 /* largest of width, height */
 #       define R300_TX_SIZE_MASK                 (15 << 26)
 #define R300_TX_FORMAT_0                    0x44C0
@@ -679,6 +692,8 @@ I am fairly certain that they are correct unless stated otherwise in comments.
 #	define R300_TX_FORMAT_B8G8_B8G8	    	    0x14     /* no swizzle */
 #	define R300_TX_FORMAT_G8R8_G8B8	    	    0x15     /* no swizzle */
 						  /* 0x16 - some 16 bit green format.. ?? */
+#	define R300_TX_FORMAT_UNK25		   (1 << 25) /* no swizzle */
+
 	/* gap */
 	/* Floating point formats */
 	/* Note - hardware supports both 16 and 32 bit floating point */
diff --git a/src/mesa/drivers/dri/r300/r300_render.c b/src/mesa/drivers/dri/r300/r300_render.c
index ac9d1550264..147beae9f75 100644
--- a/src/mesa/drivers/dri/r300/r300_render.c
+++ b/src/mesa/drivers/dri/r300/r300_render.c
@@ -765,6 +765,13 @@ static GLboolean r300_run_tcl_render(GLcontext *ctx,
 	vp = CURRENT_VERTEX_SHADER(ctx);
 	if(vp->translated == GL_FALSE)
 		translate_vertex_shader(vp);
+	if(vp->translated == GL_FALSE){
+		fprintf(stderr, "Failing back to sw-tcl\n");
+		debug_vp(ctx, vp);
+		hw_tcl_on=future_hw_tcl_on=0;
+		r300ResetHwState(rmesa);
+		return GL_TRUE;
+	}
 		
 	r300_setup_textures(ctx);
 	r300_setup_rs_unit(ctx);
diff --git a/src/mesa/drivers/dri/r300/r300_state.c b/src/mesa/drivers/dri/r300/r300_state.c
index b1c1bdef237..d611ec06e2a 100644
--- a/src/mesa/drivers/dri/r300/r300_state.c
+++ b/src/mesa/drivers/dri/r300/r300_state.c
@@ -514,6 +514,56 @@ static void r300Enable(GLcontext* ctx, GLenum cap, GLboolean state)
 }
 
 
+static void r300UpdatePolygonMode(GLcontext *ctx)
+{
+	r300ContextPtr r300 = R300_CONTEXT(ctx);
+	uint32_t hw_mode=0;
+
+	if (ctx->Polygon.FrontMode != GL_FILL ||
+	    ctx->Polygon.BackMode != GL_FILL) {
+		GLenum f, b;
+		
+		if (ctx->Polygon.FrontFace == GL_CCW) {
+			f = ctx->Polygon.FrontMode;
+			b = ctx->Polygon.BackMode;
+		} else {
+			f = ctx->Polygon.BackMode;
+			b = ctx->Polygon.FrontMode;
+		}
+
+		hw_mode |= R300_PM_ENABLED;
+
+		switch (f) {
+		case GL_LINE:
+			hw_mode |= R300_PM_FRONT_LINE;
+		break;
+		case GL_POINT: /* noop */
+			hw_mode |= R300_PM_FRONT_POINT;
+		break;
+		case GL_FILL:
+			hw_mode |= R300_PM_FRONT_FILL;
+		break;
+		}
+
+		switch (b) {
+		case GL_LINE:
+			hw_mode |= R300_PM_BACK_LINE;
+		break;
+		case GL_POINT: /* noop */
+			hw_mode |= R300_PM_BACK_POINT;
+		break;
+		case GL_FILL:
+			hw_mode |= R300_PM_BACK_FILL;
+		break;
+		}
+	}
+
+	if (r300->hw.unk4288.cmd[1] != hw_mode) {
+		R300_STATECHANGE(r300, unk4288);
+		r300->hw.unk4288.cmd[1] = hw_mode;
+	}
+}
+
 /**
  * Change the culling mode.
  *
@@ -537,6 +587,7 @@ static void r300FrontFace(GLcontext* ctx, GLenum mode)
 	(void)mode;
 
 	r300UpdateCulling(ctx);
+	r300UpdatePolygonMode(ctx);
 }
 
 
@@ -651,127 +702,15 @@ static void r300LineWidth(GLcontext *ctx, GLfloat widthf)
 
 	R300_STATECHANGE(r300, lcntl);
 	r300->hw.lcntl.cmd[1] = (int)(widthf * 6.0);
-	/* Doesnt look very good without this... */
-	r300->hw.lcntl.cmd[1] |= R300_LINE_CNT_UNK1;
+	r300->hw.lcntl.cmd[1] |= R300_LINE_CNT_VE;
 }
 
-/*
-
-glPolygonMode(GL_FRONT_AND_BACK, GL_LINE); :  00000091 (  1001 0001)
-glPolygonMode(GL_FRONT_AND_BACK, GL_POINT); : 00000001 (          1)
-
-glPolygonMode(GL_FRONT, GL_LINE); :           00000111 (1 0001 0001)
-glPolygonMode(GL_FRONT, GL_POINT); :          00000101 (1 0000 0001)
-
-glPolygonMode(GL_BACK, GL_LINE); :            000000a1 (  1010 0001)
-glPolygonMode(GL_BACK, GL_POINT); :           00000021 (    10 0001)
-
-*/
-
-/* exclusive */
-#define PM_NOT_BACK   (1<<8)
-#define PM_NOT_FRONT  (1<<5)
-
-#define PM_FRONT_LINE (1<<4)
-#define PM_BACK_LINE  (1<<7)
-
 static void r300PolygonMode(GLcontext *ctx, GLenum face, GLenum mode)
 {
-	r300ContextPtr r300 = R300_CONTEXT(ctx);
-	unsigned long hw_mode=0;
-
-	//hw_mode=r300->hw.unk4288.cmd[1];
-	hw_mode |= 1; /* enables point mode by default */
-
-	switch (ctx->Polygon.FrontMode) {
-	case GL_LINE:
-		hw_mode &= ~PM_NOT_FRONT;
-		hw_mode |= PM_FRONT_LINE;
-	break;
-	case GL_POINT:
-		hw_mode &= ~PM_NOT_FRONT;
-		hw_mode &= ~PM_FRONT_LINE;
-	break;
-	 /* I dont think fgl properly handles these... In any case, test program is needed */
-	case GL_FILL:
-	break;
-	}
-
-	switch (ctx->Polygon.BackMode) {
-	case GL_LINE:
-		hw_mode &= ~PM_NOT_BACK;
-		hw_mode |= PM_BACK_LINE;
-	break;
-	case GL_POINT:
-		hw_mode &= ~PM_NOT_BACK;
-		hw_mode &= ~PM_BACK_LINE;
-	break;
-	case GL_FILL:
-	break;
-	}
-
-	if(hw_mode == 1)
-		hw_mode = 0;
-
-#if 0
-	switch (face) {
-	case GL_FRONT:
-		//fprintf(stderr, "front\n");
-		hw_mode &= ~PM_NOT_FRONT;
-		switch (mode) {
-		case GL_LINE:
-			hw_mode |= PM_FRONT_LINE;
-		break;
-		case GL_POINT:
-			hw_mode &= ~PM_FRONT_LINE;
-		break;
-		case GL_FILL:
-		break;
-		}
-	break;
-
-	case GL_BACK:
-		//fprintf(stderr, "back\n");
-		hw_mode &= ~PM_NOT_BACK;
-		switch (mode) {
-		case GL_LINE:
-			hw_mode |= PM_BACK_LINE;
-		break;
-		case GL_POINT:
-			hw_mode &= ~PM_BACK_LINE;
-		break;
-		case GL_FILL:
-		break;
-		}
-	break;
-
-	case GL_FRONT_AND_BACK:
-		//fprintf(stderr, "front and back\n");
-		hw_mode &= ~PM_NOT_FRONT;
-		hw_mode &= ~PM_NOT_BACK;
-		switch (mode) {
-		case GL_LINE:
-			hw_mode |= PM_FRONT_LINE;
-			hw_mode |= PM_BACK_LINE;
-		break;
-		case GL_POINT:
-			hw_mode &= ~PM_FRONT_LINE;
-			hw_mode &= ~PM_BACK_LINE;
-		break;
-		case GL_FILL:
-			hw_mode = 0;
-		break;
-		}
-	break;
-	}
-#endif
-
-	//if( front and back fill) hw_mode=0;
-
-	if(r300->hw.unk4288.cmd[1] != hw_mode){
-		R300_STATECHANGE(r300, unk4288);
-		r300->hw.unk4288.cmd[1] = hw_mode;
-	}
+	(void)face;
+	(void)mode;
+	
+	r300UpdatePolygonMode(ctx);
 }
 
 /* =============================================================