diff options
| author | Alex Deucher <[email protected]> | 2008-05-13 08:37:58 -0400 |
|---|---|---|
| committer | Alex Deucher <[email protected]> | 2008-05-13 08:37:58 -0400 |
| commit | 9ef4126d48153d4754b29bd4231d29dfb15fa73f (patch) | |
| tree | 1040688085ee87a81a8ddc9dbf7d637f86fea386 /src/mesa/drivers/dri/r300/r300_reg.h | |
| parent | 0cc8ed5cccd3073670f3b77189177d44eae9b099 (diff) | |
R300: cleanup FS code and fill in missing details
Diffstat (limited to 'src/mesa/drivers/dri/r300/r300_reg.h')
| -rw-r--r-- | src/mesa/drivers/dri/r300/r300_reg.h | 455 |
1 files changed, 246 insertions, 209 deletions
diff --git a/src/mesa/drivers/dri/r300/r300_reg.h b/src/mesa/drivers/dri/r300/r300_reg.h index ff2fc155245..558d3270285 100644 --- a/src/mesa/drivers/dri/r300/r300_reg.h +++ b/src/mesa/drivers/dri/r300/r300_reg.h @@ -1596,23 +1596,23 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. * offsets into the respective instruction streams, while *_END points to the * last instruction relative to this offset. */ -#define R300_PFS_CNTL_0 0x4600 +#define R300_US_CONFIG 0x4600 # define R300_PFS_CNTL_LAST_NODES_SHIFT 0 # define R300_PFS_CNTL_LAST_NODES_MASK (3 << 0) # define R300_PFS_CNTL_FIRST_NODE_HAS_TEX (1 << 3) -#define R300_PFS_CNTL_1 0x4604 +#define R300_US_PIXSIZE 0x4604 /* There is an unshifted value here which has so far always been equal to the * index of the highest used temporary register. */ -#define R300_PFS_CNTL_2 0x4608 +#define R300_US_CODE_OFFSET 0x4608 # define R300_PFS_CNTL_ALU_OFFSET_SHIFT 0 # define R300_PFS_CNTL_ALU_OFFSET_MASK (63 << 0) # define R300_PFS_CNTL_ALU_END_SHIFT 6 # define R300_PFS_CNTL_ALU_END_MASK (63 << 6) -# define R300_PFS_CNTL_TEX_OFFSET_SHIFT 12 -# define R300_PFS_CNTL_TEX_OFFSET_MASK (31 << 12) /* GUESS */ +# define R300_PFS_CNTL_TEX_OFFSET_SHIFT 13 +# define R300_PFS_CNTL_TEX_OFFSET_MASK (31 << 13) # define R300_PFS_CNTL_TEX_END_SHIFT 18 -# define R300_PFS_CNTL_TEX_END_MASK (31 << 18) /* GUESS */ +# define R300_PFS_CNTL_TEX_END_MASK (31 << 18) /* gap */ @@ -1623,70 +1623,65 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. * * Offsets are relative to the master offset from PFS_CNTL_2. */ -#define R300_PFS_NODE_0 0x4610 -#define R300_PFS_NODE_1 0x4614 -#define R300_PFS_NODE_2 0x4618 -#define R300_PFS_NODE_3 0x461C -# define R300_PFS_NODE_ALU_OFFSET_SHIFT 0 -# define R300_PFS_NODE_ALU_OFFSET_MASK (63 << 0) -# define R300_PFS_NODE_ALU_END_SHIFT 6 -# define R300_PFS_NODE_ALU_END_MASK (63 << 6) -# define R300_PFS_NODE_TEX_OFFSET_SHIFT 12 -# define R300_PFS_NODE_TEX_OFFSET_MASK (31 << 12) -# define R300_PFS_NODE_TEX_END_SHIFT 17 -# define R300_PFS_NODE_TEX_END_MASK (31 << 17) -# define R300_PFS_NODE_OUTPUT_COLOR (1 << 22) -# define R300_PFS_NODE_OUTPUT_DEPTH (1 << 23) +#define R300_US_CODE_ADDR_0 0x4610 +#define R300_US_CODE_ADDR_1 0x4614 +#define R300_US_CODE_ADDR_2 0x4618 +#define R300_US_CODE_ADDR_3 0x461C +# define R300_ALU_START_SHIFT 0 +# define R300_ALU_START_MASK (63 << 0) +# define R300_ALU_SIZE_SHIFT 6 +# define R300_ALU_SIZE_MASK (63 << 6) +# define R300_TEX_START_SHIFT 12 +# define R300_TEX_START_MASK (31 << 12) +# define R300_TEX_SIZE_SHIFT 17 +# define R300_TEX_SIZE_MASK (31 << 17) +# define R300_RGBA_OUT (1 << 22) +# define R300_W_OUT (1 << 23) /* TEX * As far as I can tell, texture instructions cannot write into output * registers directly. A subsequent ALU instruction is always necessary, * even if it's just MAD o0, r0, 1, 0 */ -#define R300_PFS_TEXI_0 0x4620 -# define R300_FPITX_SRC_SHIFT 0 -# define R300_FPITX_SRC_MASK (31 << 0) - /* GUESS */ -# define R300_FPITX_SRC_CONST (1 << 5) -# define R300_FPITX_DST_SHIFT 6 -# define R300_FPITX_DST_MASK (31 << 6) -# define R300_FPITX_IMAGE_SHIFT 11 - /* GUESS based on layout and native limits */ -# define R300_FPITX_IMAGE_MASK (15 << 11) -/* Unsure if these are opcodes, or some kind of bitfield, but this is how - * they were set when I checked - */ -# define R300_FPITX_OPCODE_SHIFT 15 -# define R300_FPITX_OP_TEX 1 -# define R300_FPITX_OP_KIL 2 -# define R300_FPITX_OP_TXP 3 -# define R300_FPITX_OP_TXB 4 -# define R300_FPITX_OPCODE_MASK (7 << 15) +#define R300_US_TEX_INST_0 0x4620 +# define R300_SRC_ADDR_SHIFT 0 +# define R300_SRC_ADDR_MASK (31 << 0) +# define R300_DST_ADDR_SHIFT 6 +# define R300_DST_ADDR_MASK (31 << 6) +# define R300_TEX_ID_SHIFT 11 +# define R300_TEX_ID_MASK (15 << 11) +# define R300_TEX_INST_SHIFT 15 +# define R300_TEX_OP_NOP 0 +# define R300_TEX_OP_LD 1 +# define R300_TEX_OP_KIL 2 +# define R300_TEX_OP_TXP 3 +# define R300_TEX_OP_TXB 4 +# define R300_TEX_INST_MASK (7 << 15) /* Output format from the unfied shader */ -#define R500_US_OUT_FMT 0x46A4 -# define R500_US_OUT_FMT_C4_8 (0 << 0) -# define R500_US_OUT_FMT_C4_10 (1 << 0) -# define R500_US_OUT_FMT_C4_10_GAMMA (2 << 0) -# define R500_US_OUT_FMT_C_16 (3 << 0) -# define R500_US_OUT_FMT_C2_16 (4 << 0) -# define R500_US_OUT_FMT_C4_16 (5 << 0) -# define R500_US_OUT_FMT_C_16_MPEG (6 << 0) -# define R500_US_OUT_FMT_C2_16_MPEG (7 << 0) -# define R500_US_OUT_FMT_C2_4 (8 << 0) -# define R500_US_OUT_FMT_C_3_3_2 (9 << 0) -# define R500_US_OUT_FMT_C_6_5_6 (10 << 0) -# define R500_US_OUT_FMT_C_11_11_10 (11 << 0) -# define R500_US_OUT_FMT_C_10_11_11 (12 << 0) -# define R500_US_OUT_FMT_C_2_10_10_10 (13 << 0) +#define R300_US_OUT_FMT 0x46A4 +# define R300_US_OUT_FMT_C4_8 (0 << 0) +# define R300_US_OUT_FMT_C4_10 (1 << 0) +# define R300_US_OUT_FMT_C4_10_GAMMA (2 << 0) +# define R300_US_OUT_FMT_C_16 (3 << 0) +# define R300_US_OUT_FMT_C2_16 (4 << 0) +# define R300_US_OUT_FMT_C4_16 (5 << 0) +# define R300_US_OUT_FMT_C_16_MPEG (6 << 0) +# define R300_US_OUT_FMT_C2_16_MPEG (7 << 0) +# define R300_US_OUT_FMT_C2_4 (8 << 0) +# define R300_US_OUT_FMT_C_3_3_2 (9 << 0) +# define R300_US_OUT_FMT_C_6_5_6 (10 << 0) +# define R300_US_OUT_FMT_C_11_11_10 (11 << 0) +# define R300_US_OUT_FMT_C_10_11_11 (12 << 0) +# define R300_US_OUT_FMT_C_2_10_10_10 (13 << 0) /* reserved */ -# define R500_US_OUT_FMT_UNUSED (15 << 0) -# define R500_US_OUT_FMT_C_16_FP (16 << 0) -# define R500_US_OUT_FMT_C2_16_FP (17 << 0) -# define R500_US_OUT_FMT_C4_16_FP (18 << 0) -# define R500_US_OUT_FMT_C_32_FP (19 << 0) -# define R500_US_OUT_FMT_C2_32_FP (20 << 0) -# define R500_US_OUT_FMT_C4_32_FP (20 << 0) +# define R300_US_OUT_FMT_UNUSED (15 << 0) +# define R300_US_OUT_FMT_C_16_FP (16 << 0) +# define R300_US_OUT_FMT_C2_16_FP (17 << 0) +# define R300_US_OUT_FMT_C4_16_FP (18 << 0) +# define R300_US_OUT_FMT_C_32_FP (19 << 0) +# define R300_US_OUT_FMT_C2_32_FP (20 << 0) +# define R300_US_OUT_FMT_C4_32_FP (20 << 0) /* ALU * The ALU instructions register blocks are enumerated according to the order @@ -1752,147 +1747,189 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. * - Set FPI0/FPI2_SPECIAL_LRP * Arbitrary LRP (including support for swizzling) requires vanilla MAD+MAD */ -#define R300_PFS_INSTR1_0 0x46C0 -# define R300_FPI1_SRC0C_SHIFT 0 -# define R300_FPI1_SRC0C_MASK (31 << 0) -# define R300_FPI1_SRC0C_CONST (1 << 5) -# define R300_FPI1_SRC1C_SHIFT 6 -# define R300_FPI1_SRC1C_MASK (31 << 6) -# define R300_FPI1_SRC1C_CONST (1 << 11) -# define R300_FPI1_SRC2C_SHIFT 12 -# define R300_FPI1_SRC2C_MASK (31 << 12) -# define R300_FPI1_SRC2C_CONST (1 << 17) -# define R300_FPI1_SRC_MASK 0x0003ffff -# define R300_FPI1_DSTC_SHIFT 18 -# define R300_FPI1_DSTC_MASK (31 << 18) -# define R300_FPI1_DSTC_REG_MASK_SHIFT 23 -# define R300_FPI1_DSTC_REG_X (1 << 23) -# define R300_FPI1_DSTC_REG_Y (1 << 24) -# define R300_FPI1_DSTC_REG_Z (1 << 25) -# define R300_FPI1_DSTC_OUTPUT_MASK_SHIFT 26 -# define R300_FPI1_DSTC_OUTPUT_X (1 << 26) -# define R300_FPI1_DSTC_OUTPUT_Y (1 << 27) -# define R300_FPI1_DSTC_OUTPUT_Z (1 << 28) - -#define R300_PFS_INSTR3_0 0x47C0 -# define R300_FPI3_SRC0A_SHIFT 0 -# define R300_FPI3_SRC0A_MASK (31 << 0) -# define R300_FPI3_SRC0A_CONST (1 << 5) -# define R300_FPI3_SRC1A_SHIFT 6 -# define R300_FPI3_SRC1A_MASK (31 << 6) -# define R300_FPI3_SRC1A_CONST (1 << 11) -# define R300_FPI3_SRC2A_SHIFT 12 -# define R300_FPI3_SRC2A_MASK (31 << 12) -# define R300_FPI3_SRC2A_CONST (1 << 17) -# define R300_FPI3_SRC_MASK 0x0003ffff -# define R300_FPI3_DSTA_SHIFT 18 -# define R300_FPI3_DSTA_MASK (31 << 18) -# define R300_FPI3_DSTA_REG (1 << 23) -# define R300_FPI3_DSTA_OUTPUT (1 << 24) -# define R300_FPI3_DSTA_DEPTH (1 << 27) - -#define R300_PFS_INSTR0_0 0x48C0 -# define R300_FPI0_ARGC_SRC0C_XYZ 0 -# define R300_FPI0_ARGC_SRC0C_XXX 1 -# define R300_FPI0_ARGC_SRC0C_YYY 2 -# define R300_FPI0_ARGC_SRC0C_ZZZ 3 -# define R300_FPI0_ARGC_SRC1C_XYZ 4 -# define R300_FPI0_ARGC_SRC1C_XXX 5 -# define R300_FPI0_ARGC_SRC1C_YYY 6 -# define R300_FPI0_ARGC_SRC1C_ZZZ 7 -# define R300_FPI0_ARGC_SRC2C_XYZ 8 -# define R300_FPI0_ARGC_SRC2C_XXX 9 -# define R300_FPI0_ARGC_SRC2C_YYY 10 -# define R300_FPI0_ARGC_SRC2C_ZZZ 11 -# define R300_FPI0_ARGC_SRC0A 12 -# define R300_FPI0_ARGC_SRC1A 13 -# define R300_FPI0_ARGC_SRC2A 14 -# define R300_FPI0_ARGC_SRC1C_LRP 15 -# define R300_FPI0_ARGC_ZERO 20 -# define R300_FPI0_ARGC_ONE 21 - /* GUESS */ -# define R300_FPI0_ARGC_HALF 22 -# define R300_FPI0_ARGC_SRC0C_YZX 23 -# define R300_FPI0_ARGC_SRC1C_YZX 24 -# define R300_FPI0_ARGC_SRC2C_YZX 25 -# define R300_FPI0_ARGC_SRC0C_ZXY 26 -# define R300_FPI0_ARGC_SRC1C_ZXY 27 -# define R300_FPI0_ARGC_SRC2C_ZXY 28 -# define R300_FPI0_ARGC_SRC0CA_WZY 29 -# define R300_FPI0_ARGC_SRC1CA_WZY 30 -# define R300_FPI0_ARGC_SRC2CA_WZY 31 - -# define R300_FPI0_ARG0C_SHIFT 0 -# define R300_FPI0_ARG0C_MASK (31 << 0) -# define R300_FPI0_ARG0C_NEG (1 << 5) -# define R300_FPI0_ARG0C_ABS (1 << 6) -# define R300_FPI0_ARG1C_SHIFT 7 -# define R300_FPI0_ARG1C_MASK (31 << 7) -# define R300_FPI0_ARG1C_NEG (1 << 12) -# define R300_FPI0_ARG1C_ABS (1 << 13) -# define R300_FPI0_ARG2C_SHIFT 14 -# define R300_FPI0_ARG2C_MASK (31 << 14) -# define R300_FPI0_ARG2C_NEG (1 << 19) -# define R300_FPI0_ARG2C_ABS (1 << 20) -# define R300_FPI0_SPECIAL_LRP (1 << 21) -# define R300_FPI0_OUTC_MAD (0 << 23) -# define R300_FPI0_OUTC_DP3 (1 << 23) -# define R300_FPI0_OUTC_DP4 (2 << 23) -# define R300_FPI0_OUTC_MIN (4 << 23) -# define R300_FPI0_OUTC_MAX (5 << 23) -# define R300_FPI0_OUTC_CMPH (7 << 23) -# define R300_FPI0_OUTC_CMP (8 << 23) -# define R300_FPI0_OUTC_FRC (9 << 23) -# define R300_FPI0_OUTC_REPL_ALPHA (10 << 23) -# define R300_FPI0_OUTC_SAT (1 << 30) -# define R300_FPI0_INSERT_NOP (1 << 31) - -#define R300_PFS_INSTR2_0 0x49C0 -# define R300_FPI2_ARGA_SRC0C_X 0 -# define R300_FPI2_ARGA_SRC0C_Y 1 -# define R300_FPI2_ARGA_SRC0C_Z 2 -# define R300_FPI2_ARGA_SRC1C_X 3 -# define R300_FPI2_ARGA_SRC1C_Y 4 -# define R300_FPI2_ARGA_SRC1C_Z 5 -# define R300_FPI2_ARGA_SRC2C_X 6 -# define R300_FPI2_ARGA_SRC2C_Y 7 -# define R300_FPI2_ARGA_SRC2C_Z 8 -# define R300_FPI2_ARGA_SRC0A 9 -# define R300_FPI2_ARGA_SRC1A 10 -# define R300_FPI2_ARGA_SRC2A 11 -# define R300_FPI2_ARGA_SRC1A_LRP 15 -# define R300_FPI2_ARGA_ZERO 16 -# define R300_FPI2_ARGA_ONE 17 - /* GUESS */ -# define R300_FPI2_ARGA_HALF 18 -# define R300_FPI2_ARG0A_SHIFT 0 -# define R300_FPI2_ARG0A_MASK (31 << 0) -# define R300_FPI2_ARG0A_NEG (1 << 5) - /* GUESS */ -# define R300_FPI2_ARG0A_ABS (1 << 6) -# define R300_FPI2_ARG1A_SHIFT 7 -# define R300_FPI2_ARG1A_MASK (31 << 7) -# define R300_FPI2_ARG1A_NEG (1 << 12) - /* GUESS */ -# define R300_FPI2_ARG1A_ABS (1 << 13) -# define R300_FPI2_ARG2A_SHIFT 14 -# define R300_FPI2_ARG2A_MASK (31 << 14) -# define R300_FPI2_ARG2A_NEG (1 << 19) - /* GUESS */ -# define R300_FPI2_ARG2A_ABS (1 << 20) -# define R300_FPI2_SPECIAL_LRP (1 << 21) -# define R300_FPI2_OUTA_MAD (0 << 23) -# define R300_FPI2_OUTA_DP4 (1 << 23) -# define R300_FPI2_OUTA_MIN (2 << 23) -# define R300_FPI2_OUTA_MAX (3 << 23) -# define R300_FPI2_OUTA_CMP (6 << 23) -# define R300_FPI2_OUTA_FRC (7 << 23) -# define R300_FPI2_OUTA_EX2 (8 << 23) -# define R300_FPI2_OUTA_LG2 (9 << 23) -# define R300_FPI2_OUTA_RCP (10 << 23) -# define R300_FPI2_OUTA_RSQ (11 << 23) -# define R300_FPI2_OUTA_SAT (1 << 30) -# define R300_FPI2_UNKNOWN_31 (1 << 31) +#define R300_US_ALU_RGB_ADDR_0 0x46C0 +# define R300_ALU_SRC0C_SHIFT 0 +# define R300_ALU_SRC0C_MASK (31 << 0) +# define R300_ALU_SRC0C_CONST (1 << 5) +# define R300_ALU_SRC1C_SHIFT 6 +# define R300_ALU_SRC1C_MASK (31 << 6) +# define R300_ALU_SRC1C_CONST (1 << 11) +# define R300_ALU_SRC2C_SHIFT 12 +# define R300_ALU_SRC2C_MASK (31 << 12) +# define R300_ALU_SRC2C_CONST (1 << 17) +# define R300_ALU_SRC_MASK 0x0003ffff +# define R300_ALU_DSTC_SHIFT 18 +# define R300_ALU_DSTC_MASK (31 << 18) +# define R300_ALU_DSTC_REG_MASK_SHIFT 23 +# define R300_ALU_DSTC_REG_X (1 << 23) +# define R300_ALU_DSTC_REG_Y (1 << 24) +# define R300_ALU_DSTC_REG_Z (1 << 25) +# define R300_ALU_DSTC_OUTPUT_MASK_SHIFT 26 +# define R300_ALU_DSTC_OUTPUT_X (1 << 26) +# define R300_ALU_DSTC_OUTPUT_Y (1 << 27) +# define R300_ALU_DSTC_OUTPUT_Z (1 << 28) + +#define R300_US_ALU_ALPHA_ADDR_0 0x47C0 +# define R300_ALU_SRC0A_SHIFT 0 +# define R300_ALU_SRC0A_MASK (31 << 0) +# define R300_ALU_SRC0A_CONST (1 << 5) +# define R300_ALU_SRC1A_SHIFT 6 +# define R300_ALU_SRC1A_MASK (31 << 6) +# define R300_ALU_SRC1A_CONST (1 << 11) +# define R300_ALU_SRC2A_SHIFT 12 +# define R300_ALU_SRC2A_MASK (31 << 12) +# define R300_ALU_SRC2A_CONST (1 << 17) +# define R300_ALU_SRC_MASK 0x0003ffff +# define R300_ALU_DSTA_SHIFT 18 +# define R300_ALU_DSTA_MASK (31 << 18) +# define R300_ALU_DSTA_REG (1 << 23) +# define R300_ALU_DSTA_OUTPUT (1 << 24) +# define R300_ALU_DSTA_DEPTH (1 << 27) + +#define R300_US_ALU_RGB_INST_0 0x48C0 +# define R300_ALU_ARGC_SRC0C_XYZ 0 +# define R300_ALU_ARGC_SRC0C_XXX 1 +# define R300_ALU_ARGC_SRC0C_YYY 2 +# define R300_ALU_ARGC_SRC0C_ZZZ 3 +# define R300_ALU_ARGC_SRC1C_XYZ 4 +# define R300_ALU_ARGC_SRC1C_XXX 5 +# define R300_ALU_ARGC_SRC1C_YYY 6 +# define R300_ALU_ARGC_SRC1C_ZZZ 7 +# define R300_ALU_ARGC_SRC2C_XYZ 8 +# define R300_ALU_ARGC_SRC2C_XXX 9 +# define R300_ALU_ARGC_SRC2C_YYY 10 +# define R300_ALU_ARGC_SRC2C_ZZZ 11 +# define R300_ALU_ARGC_SRC0A 12 +# define R300_ALU_ARGC_SRC1A 13 +# define R300_ALU_ARGC_SRC2A 14 +# define R300_ALU_ARGC_SRCP_XYZ 15 +# define R300_ALU_ARGC_SRCP_XXX 16 +# define R300_ALU_ARGC_SRCP_YYY 17 +# define R300_ALU_ARGC_SRCP_ZZZ 18 +# define R300_ALU_ARGC_SRCP_WWW 19 +# define R300_ALU_ARGC_ZERO 20 +# define R300_ALU_ARGC_ONE 21 +# define R300_ALU_ARGC_HALF 22 +# define R300_ALU_ARGC_SRC0C_YZX 23 +# define R300_ALU_ARGC_SRC1C_YZX 24 +# define R300_ALU_ARGC_SRC2C_YZX 25 +# define R300_ALU_ARGC_SRC0C_ZXY 26 +# define R300_ALU_ARGC_SRC1C_ZXY 27 +# define R300_ALU_ARGC_SRC2C_ZXY 28 +# define R300_ALU_ARGC_SRC0CA_WZY 29 +# define R300_ALU_ARGC_SRC1CA_WZY 30 +# define R300_ALU_ARGC_SRC2CA_WZY 31 + +# define R300_ALU_ARG0C_SHIFT 0 +# define R300_ALU_ARG0C_MASK (31 << 0) +# define R300_ALU_ARG0C_NOP (0 << 5) +# define R300_ALU_ARG0C_NEG (1 << 5) +# define R300_ALU_ARG0C_ABS (2 << 5) +# define R300_ALU_ARG0C_NAB (3 << 5) +# define R300_ALU_ARG1C_SHIFT 7 +# define R300_ALU_ARG1C_MASK (31 << 7) +# define R300_ALU_ARG1C_NOP (0 << 12) +# define R300_ALU_ARG1C_NEG (1 << 12) +# define R300_ALU_ARG1C_ABS (2 << 12) +# define R300_ALU_ARG1C_NAB (3 << 12) +# define R300_ALU_ARG2C_SHIFT 14 +# define R300_ALU_ARG2C_MASK (31 << 14) +# define R300_ALU_ARG2C_NOP (0 << 19) +# define R300_ALU_ARG2C_NEG (1 << 19) +# define R300_ALU_ARG2C_ABS (2 << 19) +# define R300_ALU_ARG2C_NAB (3 << 19) +# define R300_ALU_SRCP_1_MINUS_2_SRC0 (0 << 21) +# define R300_ALU_SRCP_SRC1_MINUS_SRC0 (1 << 21) +# define R300_ALU_SRCP_SRC1_PLUS_SRC0 (2 << 21) +# define R300_ALU_SRCP_1_MINUS_SRC0 (3 << 21) + +# define R300_ALU_OUTC_MAD (0 << 23) +# define R300_ALU_OUTC_DP3 (1 << 23) +# define R300_ALU_OUTC_DP4 (2 << 23) +# define R300_ALU_OUTC_D2A (3 << 23) +# define R300_ALU_OUTC_MIN (4 << 23) +# define R300_ALU_OUTC_MAX (5 << 23) +# define R300_ALU_OUTC_CMPH (7 << 23) +# define R300_ALU_OUTC_CMP (8 << 23) +# define R300_ALU_OUTC_FRC (9 << 23) +# define R300_ALU_OUTC_REPL_ALPHA (10 << 23) + +# define R300_ALU_OUTC_MOD_NOP (0 << 27) +# define R300_ALU_OUTC_MOD_MUL2 (1 << 27) +# define R300_ALU_OUTC_MOD_MUL4 (2 << 27) +# define R300_ALU_OUTC_MOD_MUL8 (3 << 27) +# define R300_ALU_OUTC_MOD_DIV2 (4 << 27) +# define R300_ALU_OUTC_MOD_DIV4 (5 << 27) +# define R300_ALU_OUTC_MOD_DIV8 (6 << 27) + +# define R300_ALU_OUTC_CLAMP (1 << 30) +# define R300_ALU_INSERT_NOP (1 << 31) + +#define R300_US_ALU_ALPHA_INST_0 0x49C0 +# define R300_ALU_ARGA_SRC0C_X 0 +# define R300_ALU_ARGA_SRC0C_Y 1 +# define R300_ALU_ARGA_SRC0C_Z 2 +# define R300_ALU_ARGA_SRC1C_X 3 +# define R300_ALU_ARGA_SRC1C_Y 4 +# define R300_ALU_ARGA_SRC1C_Z 5 +# define R300_ALU_ARGA_SRC2C_X 6 +# define R300_ALU_ARGA_SRC2C_Y 7 +# define R300_ALU_ARGA_SRC2C_Z 8 +# define R300_ALU_ARGA_SRC0A 9 +# define R300_ALU_ARGA_SRC1A 10 +# define R300_ALU_ARGA_SRC2A 11 +# define R300_ALU_ARGA_SRCP_X 12 +# define R300_ALU_ARGA_SRCP_Y 13 +# define R300_ALU_ARGA_SRCP_Z 14 +# define R300_ALU_ARGA_SRCP_W 15 + +# define R300_ALU_ARGA_ZERO 16 +# define R300_ALU_ARGA_ONE 17 +# define R300_ALU_ARGA_HALF 18 +# define R300_ALU_ARG0A_SHIFT 0 +# define R300_ALU_ARG0A_MASK (31 << 0) +# define R300_ALU_ARG0A_NOP (0 << 5) +# define R300_ALU_ARG0A_NEG (1 << 5) +# define R300_ALU_ARG0A_ABS (2 << 5) +# define R300_ALU_ARG0A_NAB (3 << 5) +# define R300_ALU_ARG1A_SHIFT 7 +# define R300_ALU_ARG1A_MASK (31 << 7) +# define R300_ALU_ARG1A_NOP (0 << 12) +# define R300_ALU_ARG1A_NEG (1 << 12) +# define R300_ALU_ARG1A_ABS (2 << 12) +# define R300_ALU_ARG1A_NAB (3 << 12) +# define R300_ALU_ARG2A_SHIFT 14 +# define R300_ALU_ARG2A_MASK (31 << 14) +# define R300_ALU_ARG2A_NOP (0 << 19) +# define R300_ALU_ARG2A_NEG (1 << 19) +# define R300_ALU_ARG2A_ABS (2 << 19) +# define R300_ALU_ARG2A_NAB (3 << 19) +# define R300_ALU_SRCP_1_MINUS_2_SRC0 (0 << 21) +# define R300_ALU_SRCP_SRC1_MINUS_SRC0 (1 << 21) +# define R300_ALU_SRCP_SRC1_PLUS_SRC0 (2 << 21) +# define R300_ALU_SRCP_1_MINUS_SRC0 (3 << 21) + +# define R300_ALU_OUTA_MAD (0 << 23) +# define R300_ALU_OUTA_DP4 (1 << 23) +# define R300_ALU_OUTA_MIN (2 << 23) +# define R300_ALU_OUTA_MAX (3 << 23) +# define R300_ALU_OUTA_CND (5 << 23) +# define R300_ALU_OUTA_CMP (6 << 23) +# define R300_ALU_OUTA_FRC (7 << 23) +# define R300_ALU_OUTA_EX2 (8 << 23) +# define R300_ALU_OUTA_LG2 (9 << 23) +# define R300_ALU_OUTA_RCP (10 << 23) +# define R300_ALU_OUTA_RSQ (11 << 23) + +# define R300_ALU_OUTA_MOD_NOP (0 << 27) +# define R300_ALU_OUTA_MOD_MUL2 (1 << 27) +# define R300_ALU_OUTA_MOD_MUL4 (2 << 27) +# define R300_ALU_OUTA_MOD_MUL8 (3 << 27) +# define R300_ALU_OUTA_MOD_DIV2 (4 << 27) +# define R300_ALU_OUTA_MOD_DIV4 (5 << 27) +# define R300_ALU_OUTA_MOD_DIV8 (6 << 27) + +# define R300_ALU_OUTA_CLAMP (1 << 30) /* END: Fragment program instruction set */ /* Fog: Fog Blending Enable */ @@ -1967,7 +2004,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. #define R300_PFS_PARAM_0_Y 0x4C04 #define R300_PFS_PARAM_0_Z 0x4C08 #define R300_PFS_PARAM_0_W 0x4C0C -/* GUESS: PARAM_31 is last, based on native limits reported by fglrx */ +/* last consts */ #define R300_PFS_PARAM_31_X 0x4DF0 #define R300_PFS_PARAM_31_Y 0x4DF4 #define R300_PFS_PARAM_31_Z 0x4DF8 @@ -3103,12 +3140,12 @@ enum { # define R500_TEX_SEM_ACQUIRE (1 << 25) # define R500_TEX_IGNORE_UNCOVERED (1 << 26) # define R500_TEX_UNSCALED (1 << 27) -#define R500_US_W_FMT 0x46b4 -# define R500_W_FMT_W0 (0 << 0) -# define R500_W_FMT_W24 (1 << 0) -# define R500_W_FMT_W24FP (2 << 0) -# define R500_W_SRC_US (0 << 2) -# define R500_W_SRC_RAS (1 << 2) +#define R300_US_W_FMT 0x46b4 +# define R300_W_FMT_W0 (0 << 0) +# define R300_W_FMT_W24 (1 << 0) +# define R300_W_FMT_W24FP (2 << 0) +# define R300_W_SRC_US (0 << 2) +# define R300_W_SRC_RAS (1 << 2) /* Draw a primitive from vertex data in arrays loaded via 3D_LOAD_VBPNTR. |