i965/fs: Split the BRW native code emit to brw_fs_emit.cpp

This is all separate from the visitor and the optimization passes
which feed into it.

Reviewed-by: Kenneth Graunke <[email protected]>

1 files changed, 0 insertions, 839 deletions

diff --git a/src/mesa/drivers/dri/i965/brw_fs.cpp b/src/mesa/drivers/dri/i965/brw_fs.cpp
index cac5f48cc0c..9bc7b444657 100644
--- a/src/mesa/drivers/dri/i965/brw_fs.cpp
+++ b/src/mesa/drivers/dri/i965/brw_fs.cpp
@@ -47,7 +47,6 @@ extern "C" {
 #include "../glsl/ir_print_visitor.h"
 
 #define MAX_INSTRUCTION (1 << 30)
-static struct brw_reg brw_reg_from_fs_reg(class fs_reg *reg);
 
 static int
 type_size(const struct glsl_type *type)
@@ -2256,495 +2255,6 @@ fs_visitor::emit_fb_writes()
    this->current_annotation = NULL;
 }
 
-void
-fs_visitor::generate_fb_write(fs_inst *inst)
-{
-   GLboolean eot = inst->eot;
-   struct brw_reg implied_header;
-
-   /* Header is 2 regs, g0 and g1 are the contents. g0 will be implied
-    * move, here's g1.
-    */
-   brw_push_insn_state(p);
-   brw_set_mask_control(p, BRW_MASK_DISABLE);
-   brw_set_compression_control(p, BRW_COMPRESSION_NONE);
-
-   if (inst->header_present) {
-      if (intel->gen >= 6) {
-	 brw_set_compression_control(p, BRW_COMPRESSION_COMPRESSED);
-	 brw_MOV(p,
-		 retype(brw_message_reg(inst->base_mrf), BRW_REGISTER_TYPE_UD),
-		 retype(brw_vec8_grf(0, 0), BRW_REGISTER_TYPE_UD));
-	 brw_set_compression_control(p, BRW_COMPRESSION_NONE);
-
-	 if (inst->target > 0) {
-	    /* Set the render target index for choosing BLEND_STATE. */
-	    brw_MOV(p, retype(brw_vec1_reg(BRW_MESSAGE_REGISTER_FILE, 0, 2),
-			      BRW_REGISTER_TYPE_UD),
-		    brw_imm_ud(inst->target));
-	 }
-
-	 implied_header = brw_null_reg();
-      } else {
-	 implied_header = retype(brw_vec8_grf(0, 0), BRW_REGISTER_TYPE_UW);
-
-	 brw_MOV(p,
-		 brw_message_reg(inst->base_mrf + 1),
-		 brw_vec8_grf(1, 0));
-      }
-   } else {
-      implied_header = brw_null_reg();
-   }
-
-   brw_pop_insn_state(p);
-
-   brw_fb_WRITE(p,
-		c->dispatch_width,
-		inst->base_mrf,
-		implied_header,
-		inst->target,
-		inst->mlen,
-		0,
-		eot,
-		inst->header_present);
-}
-
-/* Computes the integer pixel x,y values from the origin.
- *
- * This is the basis of gl_FragCoord computation, but is also used
- * pre-gen6 for computing the deltas from v0 for computing
- * interpolation.
- */
-void
-fs_visitor::generate_pixel_xy(struct brw_reg dst, bool is_x)
-{
-   struct brw_reg g1_uw = retype(brw_vec1_grf(1, 0), BRW_REGISTER_TYPE_UW);
-   struct brw_reg src;
-   struct brw_reg deltas;
-
-   if (is_x) {
-      src = stride(suboffset(g1_uw, 4), 2, 4, 0);
-      deltas = brw_imm_v(0x10101010);
-   } else {
-      src = stride(suboffset(g1_uw, 5), 2, 4, 0);
-      deltas = brw_imm_v(0x11001100);
-   }
-
-   if (c->dispatch_width == 16) {
-      dst = vec16(dst);
-   }
-
-   /* We do this 8 or 16-wide, but since the destination is UW we
-    * don't do compression in the 16-wide case.
-    */
-   brw_push_insn_state(p);
-   brw_set_compression_control(p, BRW_COMPRESSION_NONE);
-   brw_ADD(p, dst, src, deltas);
-   brw_pop_insn_state(p);
-}
-
-void
-fs_visitor::generate_linterp(fs_inst *inst,
-			     struct brw_reg dst, struct brw_reg *src)
-{
-   struct brw_reg delta_x = src[0];
-   struct brw_reg delta_y = src[1];
-   struct brw_reg interp = src[2];
-
-   if (brw->has_pln &&
-       delta_y.nr == delta_x.nr + 1 &&
-       (intel->gen >= 6 || (delta_x.nr & 1) == 0)) {
-      brw_PLN(p, dst, interp, delta_x);
-   } else {
-      brw_LINE(p, brw_null_reg(), interp, delta_x);
-      brw_MAC(p, dst, suboffset(interp, 1), delta_y);
-   }
-}
-
-void
-fs_visitor::generate_math(fs_inst *inst,
-			  struct brw_reg dst, struct brw_reg *src)
-{
-   int op;
-
-   switch (inst->opcode) {
-   case FS_OPCODE_RCP:
-      op = BRW_MATH_FUNCTION_INV;
-      break;
-   case FS_OPCODE_RSQ:
-      op = BRW_MATH_FUNCTION_RSQ;
-      break;
-   case FS_OPCODE_SQRT:
-      op = BRW_MATH_FUNCTION_SQRT;
-      break;
-   case FS_OPCODE_EXP2:
-      op = BRW_MATH_FUNCTION_EXP;
-      break;
-   case FS_OPCODE_LOG2:
-      op = BRW_MATH_FUNCTION_LOG;
-      break;
-   case FS_OPCODE_POW:
-      op = BRW_MATH_FUNCTION_POW;
-      break;
-   case FS_OPCODE_SIN:
-      op = BRW_MATH_FUNCTION_SIN;
-      break;
-   case FS_OPCODE_COS:
-      op = BRW_MATH_FUNCTION_COS;
-      break;
-   default:
-      assert(!"not reached: unknown math function");
-      op = 0;
-      break;
-   }
-
-   if (intel->gen >= 6) {
-      assert(inst->mlen == 0);
-
-      if (inst->opcode == FS_OPCODE_POW) {
-	 brw_set_compression_control(p, BRW_COMPRESSION_NONE);
-	 brw_math2(p, dst, op, src[0], src[1]);
-
-	 if (c->dispatch_width == 16) {
-	    brw_set_compression_control(p, BRW_COMPRESSION_2NDHALF);
-	    brw_math2(p, sechalf(dst), op, sechalf(src[0]), sechalf(src[1]));
-	    brw_set_compression_control(p, BRW_COMPRESSION_COMPRESSED);
-	 }
-      } else {
-	 brw_set_compression_control(p, BRW_COMPRESSION_NONE);
-	 brw_math(p, dst,
-		  op,
-		  inst->saturate ? BRW_MATH_SATURATE_SATURATE :
-		  BRW_MATH_SATURATE_NONE,
-		  0, src[0],
-		  BRW_MATH_DATA_VECTOR,
-		  BRW_MATH_PRECISION_FULL);
-
-	 if (c->dispatch_width == 16) {
-	    brw_set_compression_control(p, BRW_COMPRESSION_2NDHALF);
-	    brw_math(p, sechalf(dst),
-		     op,
-		     inst->saturate ? BRW_MATH_SATURATE_SATURATE :
-		     BRW_MATH_SATURATE_NONE,
-		     0, sechalf(src[0]),
-		     BRW_MATH_DATA_VECTOR,
-		     BRW_MATH_PRECISION_FULL);
-	    brw_set_compression_control(p, BRW_COMPRESSION_COMPRESSED);
-	 }
-      }
-   } else /* gen <= 5 */{
-      assert(inst->mlen >= 1);
-
-      brw_set_compression_control(p, BRW_COMPRESSION_NONE);
-      brw_math(p, dst,
-	       op,
-	       inst->saturate ? BRW_MATH_SATURATE_SATURATE :
-	       BRW_MATH_SATURATE_NONE,
-	       inst->base_mrf, src[0],
-	       BRW_MATH_DATA_VECTOR,
-	       BRW_MATH_PRECISION_FULL);
-
-      if (c->dispatch_width == 16) {
-	 brw_set_compression_control(p, BRW_COMPRESSION_2NDHALF);
-	 brw_math(p, sechalf(dst),
-		  op,
-		  inst->saturate ? BRW_MATH_SATURATE_SATURATE :
-		  BRW_MATH_SATURATE_NONE,
-		  inst->base_mrf + 1, sechalf(src[0]),
-		  BRW_MATH_DATA_VECTOR,
-		  BRW_MATH_PRECISION_FULL);
-
-	 brw_set_compression_control(p, BRW_COMPRESSION_COMPRESSED);
-      }
-   }
-}
-
-void
-fs_visitor::generate_tex(fs_inst *inst, struct brw_reg dst, struct brw_reg src)
-{
-   int msg_type = -1;
-   int rlen = 4;
-   uint32_t simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD8;
-
-   if (c->dispatch_width == 16)
-      simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD16;
-
-   if (intel->gen >= 5) {
-      switch (inst->opcode) {
-      case FS_OPCODE_TEX:
-	 if (inst->shadow_compare) {
-	    msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_COMPARE;
-	 } else {
-	    msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE;
-	 }
-	 break;
-      case FS_OPCODE_TXB:
-	 if (inst->shadow_compare) {
-	    msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_BIAS_COMPARE;
-	 } else {
-	    msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_BIAS;
-	 }
-	 break;
-      case FS_OPCODE_TXL:
-	 if (inst->shadow_compare) {
-	    msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_LOD_COMPARE;
-	 } else {
-	    msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_LOD;
-	 }
-	 break;
-      case FS_OPCODE_TXD:
-	 assert(!"TXD isn't supported on gen5+ yet.");
-	 break;
-      }
-   } else {
-      switch (inst->opcode) {
-      case FS_OPCODE_TEX:
-	 /* Note that G45 and older determines shadow compare and dispatch width
-	  * from message length for most messages.
-	  */
-	 assert(c->dispatch_width == 8);
-	 msg_type = BRW_SAMPLER_MESSAGE_SIMD8_SAMPLE;
-	 if (inst->shadow_compare) {
-	    assert(inst->mlen == 6);
-	 } else {
-	    assert(inst->mlen <= 4);
-	 }
-	 break;
-      case FS_OPCODE_TXB:
-	 if (inst->shadow_compare) {
-	    assert(inst->mlen == 6);
-	    msg_type = BRW_SAMPLER_MESSAGE_SIMD8_SAMPLE_BIAS_COMPARE;
-	 } else {
-	    assert(inst->mlen == 9);
-	    msg_type = BRW_SAMPLER_MESSAGE_SIMD16_SAMPLE_BIAS;
-	    simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD16;
-	 }
-	 break;
-      case FS_OPCODE_TXL:
-	 if (inst->shadow_compare) {
-	    assert(inst->mlen == 6);
-	    msg_type = BRW_SAMPLER_MESSAGE_SIMD8_SAMPLE_LOD_COMPARE;
-	 } else {
-	    assert(inst->mlen == 9);
-	    msg_type = BRW_SAMPLER_MESSAGE_SIMD16_SAMPLE_LOD;
-	    simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD16;
-	 }
-	 break;
-      case FS_OPCODE_TXD:
-	 assert(!"TXD isn't supported on gen4 yet.");
-	 break;
-      }
-   }
-   assert(msg_type != -1);
-
-   if (simd_mode == BRW_SAMPLER_SIMD_MODE_SIMD16) {
-      rlen = 8;
-      dst = vec16(dst);
-   }
-
-   brw_SAMPLE(p,
-	      retype(dst, BRW_REGISTER_TYPE_UW),
-	      inst->base_mrf,
-	      src,
-              SURF_INDEX_TEXTURE(inst->sampler),
-	      inst->sampler,
-	      WRITEMASK_XYZW,
-	      msg_type,
-	      rlen,
-	      inst->mlen,
-	      0,
-	      inst->header_present,
-	      simd_mode);
-}
-
-
-/* For OPCODE_DDX and OPCODE_DDY, per channel of output we've got input
- * looking like:
- *
- * arg0: ss0.tl ss0.tr ss0.bl ss0.br ss1.tl ss1.tr ss1.bl ss1.br
- *
- * and we're trying to produce:
- *
- *           DDX                     DDY
- * dst: (ss0.tr - ss0.tl)     (ss0.tl - ss0.bl)
- *      (ss0.tr - ss0.tl)     (ss0.tr - ss0.br)
- *      (ss0.br - ss0.bl)     (ss0.tl - ss0.bl)
- *      (ss0.br - ss0.bl)     (ss0.tr - ss0.br)
- *      (ss1.tr - ss1.tl)     (ss1.tl - ss1.bl)
- *      (ss1.tr - ss1.tl)     (ss1.tr - ss1.br)
- *      (ss1.br - ss1.bl)     (ss1.tl - ss1.bl)
- *      (ss1.br - ss1.bl)     (ss1.tr - ss1.br)
- *
- * and add another set of two more subspans if in 16-pixel dispatch mode.
- *
- * For DDX, it ends up being easy: width = 2, horiz=0 gets us the same result
- * for each pair, and vertstride = 2 jumps us 2 elements after processing a
- * pair. But for DDY, it's harder, as we want to produce the pairs swizzled
- * between each other.  We could probably do it like ddx and swizzle the right
- * order later, but bail for now and just produce
- * ((ss0.tl - ss0.bl)x4 (ss1.tl - ss1.bl)x4)
- */
-void
-fs_visitor::generate_ddx(fs_inst *inst, struct brw_reg dst, struct brw_reg src)
-{
-   struct brw_reg src0 = brw_reg(src.file, src.nr, 1,
-				 BRW_REGISTER_TYPE_F,
-				 BRW_VERTICAL_STRIDE_2,
-				 BRW_WIDTH_2,
-				 BRW_HORIZONTAL_STRIDE_0,
-				 BRW_SWIZZLE_XYZW, WRITEMASK_XYZW);
-   struct brw_reg src1 = brw_reg(src.file, src.nr, 0,
-				 BRW_REGISTER_TYPE_F,
-				 BRW_VERTICAL_STRIDE_2,
-				 BRW_WIDTH_2,
-				 BRW_HORIZONTAL_STRIDE_0,
-				 BRW_SWIZZLE_XYZW, WRITEMASK_XYZW);
-   brw_ADD(p, dst, src0, negate(src1));
-}
-
-void
-fs_visitor::generate_ddy(fs_inst *inst, struct brw_reg dst, struct brw_reg src)
-{
-   struct brw_reg src0 = brw_reg(src.file, src.nr, 0,
-				 BRW_REGISTER_TYPE_F,
-				 BRW_VERTICAL_STRIDE_4,
-				 BRW_WIDTH_4,
-				 BRW_HORIZONTAL_STRIDE_0,
-				 BRW_SWIZZLE_XYZW, WRITEMASK_XYZW);
-   struct brw_reg src1 = brw_reg(src.file, src.nr, 2,
-				 BRW_REGISTER_TYPE_F,
-				 BRW_VERTICAL_STRIDE_4,
-				 BRW_WIDTH_4,
-				 BRW_HORIZONTAL_STRIDE_0,
-				 BRW_SWIZZLE_XYZW, WRITEMASK_XYZW);
-   brw_ADD(p, dst, src0, negate(src1));
-}
-
-void
-fs_visitor::generate_discard(fs_inst *inst)
-{
-   struct brw_reg f0 = brw_flag_reg();
-
-   if (intel->gen >= 6) {
-      struct brw_reg g1 = retype(brw_vec1_grf(1, 7), BRW_REGISTER_TYPE_UW);
-      struct brw_reg some_register;
-
-      /* As of gen6, we no longer have the mask register to look at,
-       * so life gets a bit more complicated.
-       */
-
-      /* Load the flag register with all ones. */
-      brw_push_insn_state(p);
-      brw_set_mask_control(p, BRW_MASK_DISABLE);
-      brw_MOV(p, f0, brw_imm_uw(0xffff));
-      brw_pop_insn_state(p);
-
-      /* Do a comparison that should always fail, to produce 0s in the flag
-       * reg where we have active channels.
-       */
-      some_register = retype(brw_vec8_grf(0, 0), BRW_REGISTER_TYPE_UW);
-      brw_CMP(p, retype(brw_null_reg(), BRW_REGISTER_TYPE_UD),
-	      BRW_CONDITIONAL_NZ, some_register, some_register);
-
-      /* Undo CMP's whacking of predication*/
-      brw_set_predicate_control(p, BRW_PREDICATE_NONE);
-
-      brw_push_insn_state(p);
-      brw_set_mask_control(p, BRW_MASK_DISABLE);
-      brw_AND(p, g1, f0, g1);
-      brw_pop_insn_state(p);
-   } else {
-      struct brw_reg g0 = retype(brw_vec1_grf(0, 0), BRW_REGISTER_TYPE_UW);
-
-      brw_push_insn_state(p);
-      brw_set_mask_control(p, BRW_MASK_DISABLE);
-      brw_set_compression_control(p, BRW_COMPRESSION_NONE);
-
-      /* Unlike the 965, we have the mask reg, so we just need
-       * somewhere to invert that (containing channels to be disabled)
-       * so it can be ANDed with the mask of pixels still to be
-       * written. Use the flag reg for consistency with gen6+.
-       */
-      brw_NOT(p, f0, brw_mask_reg(1)); /* IMASK */
-      brw_AND(p, g0, f0, g0);
-
-      brw_pop_insn_state(p);
-   }
-}
-
-void
-fs_visitor::generate_spill(fs_inst *inst, struct brw_reg src)
-{
-   assert(inst->mlen != 0);
-
-   brw_MOV(p,
-	   retype(brw_message_reg(inst->base_mrf + 1), BRW_REGISTER_TYPE_UD),
-	   retype(src, BRW_REGISTER_TYPE_UD));
-   brw_oword_block_write_scratch(p, brw_message_reg(inst->base_mrf), 1,
-				 inst->offset);
-}
-
-void
-fs_visitor::generate_unspill(fs_inst *inst, struct brw_reg dst)
-{
-   assert(inst->mlen != 0);
-
-   /* Clear any post destination dependencies that would be ignored by
-    * the block read.  See the B-Spec for pre-gen5 send instruction.
-    *
-    * This could use a better solution, since texture sampling and
-    * math reads could potentially run into it as well -- anywhere
-    * that we have a SEND with a destination that is a register that
-    * was written but not read within the last N instructions (what's
-    * N?  unsure).  This is rare because of dead code elimination, but
-    * not impossible.
-    */
-   if (intel->gen == 4 && !intel->is_g4x)
-      brw_MOV(p, brw_null_reg(), dst);
-
-   brw_oword_block_read_scratch(p, dst, brw_message_reg(inst->base_mrf), 1,
-				inst->offset);
-
-   if (intel->gen == 4 && !intel->is_g4x) {
-      /* gen4 errata: destination from a send can't be used as a
-       * destination until it's been read.  Just read it so we don't
-       * have to worry.
-       */
-      brw_MOV(p, brw_null_reg(), dst);
-   }
-}
-
-
-void
-fs_visitor::generate_pull_constant_load(fs_inst *inst, struct brw_reg dst)
-{
-   assert(inst->mlen != 0);
-
-   /* Clear any post destination dependencies that would be ignored by
-    * the block read.  See the B-Spec for pre-gen5 send instruction.
-    *
-    * This could use a better solution, since texture sampling and
-    * math reads could potentially run into it as well -- anywhere
-    * that we have a SEND with a destination that is a register that
-    * was written but not read within the last N instructions (what's
-    * N?  unsure).  This is rare because of dead code elimination, but
-    * not impossible.
-    */
-   if (intel->gen == 4 && !intel->is_g4x)
-      brw_MOV(p, brw_null_reg(), dst);
-
-   brw_oword_block_read(p, dst, brw_message_reg(inst->base_mrf),
-			inst->offset, SURF_INDEX_FRAG_CONST_BUFFER);
-
-   if (intel->gen == 4 && !intel->is_g4x) {
-      /* gen4 errata: destination from a send can't be used as a
-       * destination until it's been read.  Just read it so we don't
-       * have to worry.
-       */
-      brw_MOV(p, brw_null_reg(), dst);
-   }
-}
-
 /**
  * To be called after the last _mesa_add_state_reference() call, to
  * set up prog_data.param[] for assign_curb_setup() and
@@ -3645,355 +3155,6 @@ fs_visitor::virtual_grf_interferes(int a, int b)
    return start < end;
 }
 
-static struct brw_reg brw_reg_from_fs_reg(fs_reg *reg)
-{
-   struct brw_reg brw_reg;
-
-   switch (reg->file) {
-   case GRF:
-   case ARF:
-   case MRF:
-      if (reg->smear == -1) {
-	 brw_reg = brw_vec8_reg(reg->file,
-				reg->hw_reg, 0);
-      } else {
-	 brw_reg = brw_vec1_reg(reg->file,
-				reg->hw_reg, reg->smear);
-      }
-      brw_reg = retype(brw_reg, reg->type);
-      if (reg->sechalf)
-	 brw_reg = sechalf(brw_reg);
-      break;
-   case IMM:
-      switch (reg->type) {
-      case BRW_REGISTER_TYPE_F:
-	 brw_reg = brw_imm_f(reg->imm.f);
-	 break;
-      case BRW_REGISTER_TYPE_D:
-	 brw_reg = brw_imm_d(reg->imm.i);
-	 break;
-      case BRW_REGISTER_TYPE_UD:
-	 brw_reg = brw_imm_ud(reg->imm.u);
-	 break;
-      default:
-	 assert(!"not reached");
-	 brw_reg = brw_null_reg();
-	 break;
-      }
-      break;
-   case FIXED_HW_REG:
-      brw_reg = reg->fixed_hw_reg;
-      break;
-   case BAD_FILE:
-      /* Probably unused. */
-      brw_reg = brw_null_reg();
-      break;
-   case UNIFORM:
-      assert(!"not reached");
-      brw_reg = brw_null_reg();
-      break;
-   default:
-      assert(!"not reached");
-      brw_reg = brw_null_reg();
-      break;
-   }
-   if (reg->abs)
-      brw_reg = brw_abs(brw_reg);
-   if (reg->negate)
-      brw_reg = negate(brw_reg);
-
-   return brw_reg;
-}
-
-void
-fs_visitor::generate_code()
-{
-   int last_native_inst = p->nr_insn;
-   const char *last_annotation_string = NULL;
-   ir_instruction *last_annotation_ir = NULL;
-
-   int loop_stack_array_size = 16;
-   int loop_stack_depth = 0;
-   brw_instruction **loop_stack =
-      rzalloc_array(this->mem_ctx, brw_instruction *, loop_stack_array_size);
-   int *if_depth_in_loop =
-      rzalloc_array(this->mem_ctx, int, loop_stack_array_size);
-
-
-   if (unlikely(INTEL_DEBUG & DEBUG_WM)) {
-      printf("Native code for fragment shader %d (%d-wide dispatch):\n",
-	     ctx->Shader.CurrentFragmentProgram->Name, c->dispatch_width);
-   }
-
-   foreach_iter(exec_list_iterator, iter, this->instructions) {
-      fs_inst *inst = (fs_inst *)iter.get();
-      struct brw_reg src[3], dst;
-
-      if (unlikely(INTEL_DEBUG & DEBUG_WM)) {
-	 if (last_annotation_ir != inst->ir) {
-	    last_annotation_ir = inst->ir;
-	    if (last_annotation_ir) {
-	       printf("   ");
-	       last_annotation_ir->print();
-	       printf("\n");
-	    }
-	 }
-	 if (last_annotation_string != inst->annotation) {
-	    last_annotation_string = inst->annotation;
-	    if (last_annotation_string)
-	       printf("   %s\n", last_annotation_string);
-	 }
-      }
-
-      for (unsigned int i = 0; i < 3; i++) {
-	 src[i] = brw_reg_from_fs_reg(&inst->src[i]);
-      }
-      dst = brw_reg_from_fs_reg(&inst->dst);
-
-      brw_set_conditionalmod(p, inst->conditional_mod);
-      brw_set_predicate_control(p, inst->predicated);
-      brw_set_predicate_inverse(p, inst->predicate_inverse);
-      brw_set_saturate(p, inst->saturate);
-
-      if (inst->force_uncompressed || c->dispatch_width == 8) {
-	 brw_set_compression_control(p, BRW_COMPRESSION_NONE);
-      } else if (inst->force_sechalf) {
-	 brw_set_compression_control(p, BRW_COMPRESSION_2NDHALF);
-      } else {
-	 brw_set_compression_control(p, BRW_COMPRESSION_COMPRESSED);
-      }
-
-      switch (inst->opcode) {
-      case BRW_OPCODE_MOV:
-	 brw_MOV(p, dst, src[0]);
-	 break;
-      case BRW_OPCODE_ADD:
-	 brw_ADD(p, dst, src[0], src[1]);
-	 break;
-      case BRW_OPCODE_MUL:
-	 brw_MUL(p, dst, src[0], src[1]);
-	 break;
-
-      case BRW_OPCODE_FRC:
-	 brw_FRC(p, dst, src[0]);
-	 break;
-      case BRW_OPCODE_RNDD:
-	 brw_RNDD(p, dst, src[0]);
-	 break;
-      case BRW_OPCODE_RNDE:
-	 brw_RNDE(p, dst, src[0]);
-	 break;
-      case BRW_OPCODE_RNDZ:
-	 brw_RNDZ(p, dst, src[0]);
-	 break;
-
-      case BRW_OPCODE_AND:
-	 brw_AND(p, dst, src[0], src[1]);
-	 break;
-      case BRW_OPCODE_OR:
-	 brw_OR(p, dst, src[0], src[1]);
-	 break;
-      case BRW_OPCODE_XOR:
-	 brw_XOR(p, dst, src[0], src[1]);
-	 break;
-      case BRW_OPCODE_NOT:
-	 brw_NOT(p, dst, src[0]);
-	 break;
-      case BRW_OPCODE_ASR:
-	 brw_ASR(p, dst, src[0], src[1]);
-	 break;
-      case BRW_OPCODE_SHR:
-	 brw_SHR(p, dst, src[0], src[1]);
-	 break;
-      case BRW_OPCODE_SHL:
-	 brw_SHL(p, dst, src[0], src[1]);
-	 break;
-
-      case BRW_OPCODE_CMP:
-	 brw_CMP(p, dst, inst->conditional_mod, src[0], src[1]);
-	 break;
-      case BRW_OPCODE_SEL:
-	 brw_SEL(p, dst, src[0], src[1]);
-	 break;
-
-      case BRW_OPCODE_IF:
-	 if (inst->src[0].file != BAD_FILE) {
-	    /* The instruction has an embedded compare (only allowed on gen6) */
-	    assert(intel->gen == 6);
-	    gen6_IF(p, inst->conditional_mod, src[0], src[1]);
-	 } else {
-	    brw_IF(p, c->dispatch_width == 16 ? BRW_EXECUTE_16 : BRW_EXECUTE_8);
-	 }
-	 if_depth_in_loop[loop_stack_depth]++;
-	 break;
-
-      case BRW_OPCODE_ELSE:
-	 brw_ELSE(p);
-	 break;
-      case BRW_OPCODE_ENDIF:
-	 brw_ENDIF(p);
-	 if_depth_in_loop[loop_stack_depth]--;
-	 break;
-
-      case BRW_OPCODE_DO:
-	 loop_stack[loop_stack_depth++] = brw_DO(p, BRW_EXECUTE_8);
-	 if (loop_stack_array_size <= loop_stack_depth) {
-	    loop_stack_array_size *= 2;
-	    loop_stack = reralloc(this->mem_ctx, loop_stack, brw_instruction *,
-				  loop_stack_array_size);
-	    if_depth_in_loop = reralloc(this->mem_ctx, if_depth_in_loop, int,
-				        loop_stack_array_size);
-	 }
-	 if_depth_in_loop[loop_stack_depth] = 0;
-	 break;
-
-      case BRW_OPCODE_BREAK:
-	 brw_BREAK(p, if_depth_in_loop[loop_stack_depth]);
-	 brw_set_predicate_control(p, BRW_PREDICATE_NONE);
-	 break;
-      case BRW_OPCODE_CONTINUE:
-	 /* FINISHME: We need to write the loop instruction support still. */
-	 if (intel->gen >= 6)
-	    gen6_CONT(p, loop_stack[loop_stack_depth - 1]);
-	 else
-	    brw_CONT(p, if_depth_in_loop[loop_stack_depth]);
-	 brw_set_predicate_control(p, BRW_PREDICATE_NONE);
-	 break;
-
-      case BRW_OPCODE_WHILE: {
-	 struct brw_instruction *inst0, *inst1;
-	 GLuint br = 1;
-
-	 if (intel->gen >= 5)
-	    br = 2;
-
-	 assert(loop_stack_depth > 0);
-	 loop_stack_depth--;
-	 inst0 = inst1 = brw_WHILE(p, loop_stack[loop_stack_depth]);
-	 if (intel->gen < 6) {
-	    /* patch all the BREAK/CONT instructions from last BGNLOOP */
-	    while (inst0 > loop_stack[loop_stack_depth]) {
-	       inst0--;
-	       if (inst0->header.opcode == BRW_OPCODE_BREAK &&
-		   inst0->bits3.if_else.jump_count == 0) {
-		  inst0->bits3.if_else.jump_count = br * (inst1 - inst0 + 1);
-	    }
-	       else if (inst0->header.opcode == BRW_OPCODE_CONTINUE &&
-			inst0->bits3.if_else.jump_count == 0) {
-		  inst0->bits3.if_else.jump_count = br * (inst1 - inst0);
-	       }
-	    }
-	 }
-      }
-	 break;
-
-      case FS_OPCODE_RCP:
-      case FS_OPCODE_RSQ:
-      case FS_OPCODE_SQRT:
-      case FS_OPCODE_EXP2:
-      case FS_OPCODE_LOG2:
-      case FS_OPCODE_POW:
-      case FS_OPCODE_SIN:
-      case FS_OPCODE_COS:
-	 generate_math(inst, dst, src);
-	 break;
-      case FS_OPCODE_PIXEL_X:
-	 generate_pixel_xy(dst, true);
-	 break;
-      case FS_OPCODE_PIXEL_Y:
-	 generate_pixel_xy(dst, false);
-	 break;
-      case FS_OPCODE_CINTERP:
-	 brw_MOV(p, dst, src[0]);
-	 break;
-      case FS_OPCODE_LINTERP:
-	 generate_linterp(inst, dst, src);
-	 break;
-      case FS_OPCODE_TEX:
-      case FS_OPCODE_TXB:
-      case FS_OPCODE_TXD:
-      case FS_OPCODE_TXL:
-	 generate_tex(inst, dst, src[0]);
-	 break;
-      case FS_OPCODE_DISCARD:
-	 generate_discard(inst);
-	 break;
-      case FS_OPCODE_DDX:
-	 generate_ddx(inst, dst, src[0]);
-	 break;
-      case FS_OPCODE_DDY:
-	 generate_ddy(inst, dst, src[0]);
-	 break;
-
-      case FS_OPCODE_SPILL:
-	 generate_spill(inst, src[0]);
-	 break;
-
-      case FS_OPCODE_UNSPILL:
-	 generate_unspill(inst, dst);
-	 break;
-
-      case FS_OPCODE_PULL_CONSTANT_LOAD:
-	 generate_pull_constant_load(inst, dst);
-	 break;
-
-      case FS_OPCODE_FB_WRITE:
-	 generate_fb_write(inst);
-	 break;
-      default:
-	 if (inst->opcode < (int)ARRAY_SIZE(brw_opcodes)) {
-	    _mesa_problem(ctx, "Unsupported opcode `%s' in FS",
-			  brw_opcodes[inst->opcode].name);
-	 } else {
-	    _mesa_problem(ctx, "Unsupported opcode %d in FS", inst->opcode);
-	 }
-	 fail("unsupported opcode in FS\n");
-      }
-
-      if (unlikely(INTEL_DEBUG & DEBUG_WM)) {
-	 for (unsigned int i = last_native_inst; i < p->nr_insn; i++) {
-	    if (0) {
-	       printf("0x%08x 0x%08x 0x%08x 0x%08x ",
-		      ((uint32_t *)&p->store[i])[3],
-		      ((uint32_t *)&p->store[i])[2],
-		      ((uint32_t *)&p->store[i])[1],
-		      ((uint32_t *)&p->store[i])[0]);
-	    }
-	    brw_disasm(stdout, &p->store[i], intel->gen);
-	 }
-      }
-
-      last_native_inst = p->nr_insn;
-   }
-
-   if (unlikely(INTEL_DEBUG & DEBUG_WM)) {
-      printf("\n");
-   }
-
-   ralloc_free(loop_stack);
-   ralloc_free(if_depth_in_loop);
-
-   brw_set_uip_jip(p);
-
-   /* OK, while the INTEL_DEBUG=wm above is very nice for debugging FS
-    * emit issues, it doesn't get the jump distances into the output,
-    * which is often something we want to debug.  So this is here in
-    * case you're doing that.
-    */
-   if (0) {
-      if (unlikely(INTEL_DEBUG & DEBUG_WM)) {
-	 for (unsigned int i = 0; i < p->nr_insn; i++) {
-	    printf("0x%08x 0x%08x 0x%08x 0x%08x ",
-		   ((uint32_t *)&p->store[i])[3],
-		   ((uint32_t *)&p->store[i])[2],
-		   ((uint32_t *)&p->store[i])[1],
-		   ((uint32_t *)&p->store[i])[0]);
-	    brw_disasm(stdout, &p->store[i], intel->gen);
-	 }
-      }
-   }
-}
-
 bool
 fs_visitor::run()
 {