intel/genxml: Add engine definition to render engine instructions (gen11)

Instructions meant for the render engine now have a definition specifying that
so that can differentiate instructions meant for different engines due to shared
opcodes.

v2: Divided into individual patches for each gen

v3: Added additional engine definitions.

v4: Added missing engine definition to MI_TOPOLOGY_FILTER.

Reviewed-by: Lionel Landwerlin <[email protected]>

1 files changed, 116 insertions, 116 deletions

diff --git a/src/intel/genxml/gen11.xml b/src/intel/genxml/gen11.xml
index 454ef8f4103..b975fe94776 100644
--- a/src/intel/genxml/gen11.xml
+++ b/src/intel/genxml/gen11.xml
@@ -823,7 +823,7 @@
     </field>
   </struct>
 
-  <instruction name="3DPRIMITIVE" bias="2" length="7">
+  <instruction name="3DPRIMITIVE" bias="2" length="7" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="3"/>
@@ -849,7 +849,7 @@
     <field name="Extended Parameter 2" start="288" end="319" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_3D_MODE" bias="2" length="2">
+  <instruction name="3DSTATE_3D_MODE" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -858,7 +858,7 @@
     <field name="Mask Bits" start="48" end="63" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_AA_LINE_PARAMETERS" bias="2" length="3">
+  <instruction name="3DSTATE_AA_LINE_PARAMETERS" bias="2" length="3" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -874,7 +874,7 @@
     <field name="AA Coverage EndCap Slope" start="64" end="71" type="u0.8"/>
   </instruction>
 
-  <instruction name="3DSTATE_BINDING_TABLE_EDIT_DS" bias="2">
+  <instruction name="3DSTATE_BINDING_TABLE_EDIT_DS" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -891,7 +891,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_BINDING_TABLE_EDIT_GS" bias="2">
+  <instruction name="3DSTATE_BINDING_TABLE_EDIT_GS" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -908,7 +908,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_BINDING_TABLE_EDIT_HS" bias="2">
+  <instruction name="3DSTATE_BINDING_TABLE_EDIT_HS" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -925,7 +925,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_BINDING_TABLE_EDIT_PS" bias="2">
+  <instruction name="3DSTATE_BINDING_TABLE_EDIT_PS" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -942,7 +942,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_BINDING_TABLE_EDIT_VS" bias="2">
+  <instruction name="3DSTATE_BINDING_TABLE_EDIT_VS" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -959,7 +959,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_BINDING_TABLE_POINTERS_DS" bias="2" length="2">
+  <instruction name="3DSTATE_BINDING_TABLE_POINTERS_DS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -968,7 +968,7 @@
     <field name="Pointer to DS Binding Table" start="37" end="47" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_BINDING_TABLE_POINTERS_GS" bias="2" length="2">
+  <instruction name="3DSTATE_BINDING_TABLE_POINTERS_GS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -977,7 +977,7 @@
     <field name="Pointer to GS Binding Table" start="37" end="47" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_BINDING_TABLE_POINTERS_HS" bias="2" length="2">
+  <instruction name="3DSTATE_BINDING_TABLE_POINTERS_HS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -986,7 +986,7 @@
     <field name="Pointer to HS Binding Table" start="37" end="47" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_BINDING_TABLE_POINTERS_PS" bias="2" length="2">
+  <instruction name="3DSTATE_BINDING_TABLE_POINTERS_PS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -995,7 +995,7 @@
     <field name="Pointer to PS Binding Table" start="37" end="47" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_BINDING_TABLE_POINTERS_VS" bias="2" length="2">
+  <instruction name="3DSTATE_BINDING_TABLE_POINTERS_VS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1004,7 +1004,7 @@
     <field name="Pointer to VS Binding Table" start="37" end="47" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_BINDING_TABLE_POOL_ALLOC" bias="2" length="4">
+  <instruction name="3DSTATE_BINDING_TABLE_POOL_ALLOC" bias="2" length="4" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1018,7 +1018,7 @@
     </field>
   </instruction>
 
-  <instruction name="3DSTATE_BLEND_STATE_POINTERS" bias="2" length="2">
+  <instruction name="3DSTATE_BLEND_STATE_POINTERS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1028,7 +1028,7 @@
     <field name="Blend State Pointer Valid" start="32" end="32" type="bool"/>
   </instruction>
 
-  <instruction name="3DSTATE_CC_STATE_POINTERS" bias="2" length="2">
+  <instruction name="3DSTATE_CC_STATE_POINTERS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1038,7 +1038,7 @@
     <field name="Color Calc State Pointer Valid" start="32" end="32" type="bool"/>
   </instruction>
 
-  <instruction name="3DSTATE_CHROMA_KEY" bias="2" length="4">
+  <instruction name="3DSTATE_CHROMA_KEY" bias="2" length="4" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1049,7 +1049,7 @@
     <field name="ChromaKey High Value" start="96" end="127" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_CLEAR_PARAMS" bias="2" length="3">
+  <instruction name="3DSTATE_CLEAR_PARAMS" bias="2" length="3" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1059,7 +1059,7 @@
     <field name="Depth Clear Value Valid" start="64" end="64" type="bool"/>
   </instruction>
 
-  <instruction name="3DSTATE_CLIP" bias="2" length="4">
+  <instruction name="3DSTATE_CLIP" bias="2" length="4" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1099,7 +1099,7 @@
     <field name="Maximum VP Index" start="96" end="99" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_CONSTANT_DS" bias="2" length="11">
+  <instruction name="3DSTATE_CONSTANT_DS" bias="2" length="11" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1109,7 +1109,7 @@
     <field name="Constant Body" start="32" end="351" type="3DSTATE_CONSTANT_BODY"/>
   </instruction>
 
-  <instruction name="3DSTATE_CONSTANT_GS" bias="2" length="11">
+  <instruction name="3DSTATE_CONSTANT_GS" bias="2" length="11" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1119,7 +1119,7 @@
     <field name="Constant Body" start="32" end="351" type="3DSTATE_CONSTANT_BODY"/>
   </instruction>
 
-  <instruction name="3DSTATE_CONSTANT_HS" bias="2" length="11">
+  <instruction name="3DSTATE_CONSTANT_HS" bias="2" length="11" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1129,7 +1129,7 @@
     <field name="Constant Body" start="32" end="351" type="3DSTATE_CONSTANT_BODY"/>
   </instruction>
 
-  <instruction name="3DSTATE_CONSTANT_PS" bias="2" length="11">
+  <instruction name="3DSTATE_CONSTANT_PS" bias="2" length="11" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1140,7 +1140,7 @@
     <field name="Constant Body" start="32" end="351" type="3DSTATE_CONSTANT_BODY"/>
   </instruction>
 
-  <instruction name="3DSTATE_CONSTANT_VS" bias="2" length="11">
+  <instruction name="3DSTATE_CONSTANT_VS" bias="2" length="11" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1150,7 +1150,7 @@
     <field name="Constant Body" start="32" end="351" type="3DSTATE_CONSTANT_BODY"/>
   </instruction>
 
-  <instruction name="3DSTATE_DEPTH_BUFFER" bias="2" length="8">
+  <instruction name="3DSTATE_DEPTH_BUFFER" bias="2" length="8" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1188,7 +1188,7 @@
     <field name="Surface QPitch" start="224" end="238" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_DRAWING_RECTANGLE" bias="2" length="4">
+  <instruction name="3DSTATE_DRAWING_RECTANGLE" bias="2" length="4" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1207,7 +1207,7 @@
     <field name="Drawing Rectangle Origin X" start="96" end="111" type="int"/>
   </instruction>
 
-  <instruction name="3DSTATE_DS" bias="2" length="11">
+  <instruction name="3DSTATE_DS" bias="2" length="11" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1254,7 +1254,7 @@
     <field name="DUAL_PATCH Kernel Start Pointer" start="294" end="351" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_GATHER_CONSTANT_DS" bias="2">
+  <instruction name="3DSTATE_GATHER_CONSTANT_DS" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1278,7 +1278,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_GATHER_CONSTANT_GS" bias="2">
+  <instruction name="3DSTATE_GATHER_CONSTANT_GS" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1302,7 +1302,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_GATHER_CONSTANT_HS" bias="2">
+  <instruction name="3DSTATE_GATHER_CONSTANT_HS" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1326,7 +1326,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_GATHER_CONSTANT_PS" bias="2">
+  <instruction name="3DSTATE_GATHER_CONSTANT_PS" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1352,7 +1352,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_GATHER_CONSTANT_VS" bias="2">
+  <instruction name="3DSTATE_GATHER_CONSTANT_VS" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1378,7 +1378,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_GATHER_POOL_ALLOC" bias="2" length="4">
+  <instruction name="3DSTATE_GATHER_POOL_ALLOC" bias="2" length="4" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1390,7 +1390,7 @@
     <field name="Gather Pool Buffer Size" start="108" end="127" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_GS" bias="2" length="10">
+  <instruction name="3DSTATE_GS" bias="2" length="10" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1457,7 +1457,7 @@
     <field name="User Clip Distance Cull Test Enable Bitmask" start="288" end="295" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_HIER_DEPTH_BUFFER" bias="2" length="5">
+  <instruction name="3DSTATE_HIER_DEPTH_BUFFER" bias="2" length="5" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1475,7 +1475,7 @@
     <field name="Surface QPitch" start="128" end="142" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_HS" bias="2" length="9">
+  <instruction name="3DSTATE_HS" bias="2" length="9" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1520,7 +1520,7 @@
     <field name="Include Primitive ID" start="224" end="224" type="bool"/>
   </instruction>
 
-  <instruction name="3DSTATE_INDEX_BUFFER" bias="2" length="5">
+  <instruction name="3DSTATE_INDEX_BUFFER" bias="2" length="5" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1537,7 +1537,7 @@
     <field name="Buffer Size" start="128" end="159" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_LINE_STIPPLE" bias="2" length="3">
+  <instruction name="3DSTATE_LINE_STIPPLE" bias="2" length="3" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1551,7 +1551,7 @@
     <field name="Line Stipple Repeat Count" start="64" end="72" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_MONOFILTER_SIZE" bias="2" length="2">
+  <instruction name="3DSTATE_MONOFILTER_SIZE" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1561,7 +1561,7 @@
     <field name="Monochrome Filter Height" start="32" end="34" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_MULTISAMPLE" bias="2" length="2">
+  <instruction name="3DSTATE_MULTISAMPLE" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1575,7 +1575,7 @@
     <field name="Number of Multisamples" start="33" end="35" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_POLY_STIPPLE_OFFSET" bias="2" length="2">
+  <instruction name="3DSTATE_POLY_STIPPLE_OFFSET" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1585,7 +1585,7 @@
     <field name="Polygon Stipple Y Offset" start="32" end="36" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_POLY_STIPPLE_PATTERN" bias="2" length="33">
+  <instruction name="3DSTATE_POLY_STIPPLE_PATTERN" bias="2" length="33" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1596,7 +1596,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_PS" bias="2" length="12">
+  <instruction name="3DSTATE_PS" bias="2" length="12" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1659,7 +1659,7 @@
     <field name="Kernel Start Pointer 2" start="326" end="383" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_PS_BLEND" bias="2" length="2">
+  <instruction name="3DSTATE_PS_BLEND" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1676,7 +1676,7 @@
     <field name="Independent Alpha Blend Enable" start="39" end="39" type="bool"/>
   </instruction>
 
-  <instruction name="3DSTATE_PS_EXTRA" bias="2" length="2">
+  <instruction name="3DSTATE_PS_EXTRA" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1714,7 +1714,7 @@
     </field>
   </instruction>
 
-  <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_DS" bias="2" length="2">
+  <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_DS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1724,7 +1724,7 @@
     <field name="Constant Buffer Size" start="32" end="37" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_GS" bias="2" length="2">
+  <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_GS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1734,7 +1734,7 @@
     <field name="Constant Buffer Size" start="32" end="37" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_HS" bias="2" length="2">
+  <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_HS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1744,7 +1744,7 @@
     <field name="Constant Buffer Size" start="32" end="37" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_PS" bias="2" length="2">
+  <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_PS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1754,7 +1754,7 @@
     <field name="Constant Buffer Size" start="32" end="37" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_VS" bias="2" length="2">
+  <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_VS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1764,7 +1764,7 @@
     <field name="Constant Buffer Size" start="32" end="37" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_RASTER" bias="2" length="5">
+  <instruction name="3DSTATE_RASTER" bias="2" length="5" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1825,7 +1825,7 @@
     <field name="Global Depth Offset Clamp" start="128" end="159" type="float"/>
   </instruction>
 
-  <instruction name="3DSTATE_RS_CONSTANT_POINTER" bias="2" length="4">
+  <instruction name="3DSTATE_RS_CONSTANT_POINTER" bias="2" length="4" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1843,7 +1843,7 @@
     <field name="Global Constant Buffer Address High" start="96" end="127" type="address"/>
   </instruction>
 
-  <instruction name="3DSTATE_SAMPLER_PALETTE_LOAD0" bias="2">
+  <instruction name="3DSTATE_SAMPLER_PALETTE_LOAD0" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1854,7 +1854,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_SAMPLER_PALETTE_LOAD1" bias="2">
+  <instruction name="3DSTATE_SAMPLER_PALETTE_LOAD1" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1868,7 +1868,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_DS" bias="2" length="2">
+  <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_DS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1877,7 +1877,7 @@
     <field name="Pointer to DS Sampler State" start="37" end="63" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_GS" bias="2" length="2">
+  <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_GS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1886,7 +1886,7 @@
     <field name="Pointer to GS Sampler State" start="37" end="63" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_HS" bias="2" length="2">
+  <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_HS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1895,7 +1895,7 @@
     <field name="Pointer to HS Sampler State" start="37" end="63" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_PS" bias="2" length="2">
+  <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_PS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1904,7 +1904,7 @@
     <field name="Pointer to PS Sampler State" start="37" end="63" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_VS" bias="2" length="2">
+  <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_VS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1913,7 +1913,7 @@
     <field name="Pointer to VS Sampler State" start="37" end="63" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_SAMPLE_MASK" bias="2" length="2">
+  <instruction name="3DSTATE_SAMPLE_MASK" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -1922,7 +1922,7 @@
     <field name="Sample Mask" start="32" end="47" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_SAMPLE_PATTERN" bias="2" length="9">
+  <instruction name="3DSTATE_SAMPLE_PATTERN" bias="2" length="9" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -1992,7 +1992,7 @@
     <field name="2x Sample0 Y Offset" start="256" end="259" type="u0.4"/>
   </instruction>
 
-  <instruction name="3DSTATE_SBE" bias="2" length="6">
+  <instruction name="3DSTATE_SBE" bias="2" length="6" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2025,7 +2025,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_SBE_SWIZ" bias="2" length="11">
+  <instruction name="3DSTATE_SBE_SWIZ" bias="2" length="11" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2039,7 +2039,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_SCISSOR_STATE_POINTERS" bias="2" length="2">
+  <instruction name="3DSTATE_SCISSOR_STATE_POINTERS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2048,7 +2048,7 @@
     <field name="Scissor Rect Pointer" start="37" end="63" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_SF" bias="2" length="4">
+  <instruction name="3DSTATE_SF" bias="2" length="4" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2080,7 +2080,7 @@
     <field name="Point Width" start="96" end="106" type="u8.3"/>
   </instruction>
 
-  <instruction name="3DSTATE_SO_BUFFER" bias="2" length="8">
+  <instruction name="3DSTATE_SO_BUFFER" bias="2" length="8" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2098,7 +2098,7 @@
     <field name="Stream Offset" start="224" end="255" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_SO_DECL_LIST" bias="2">
+  <instruction name="3DSTATE_SO_DECL_LIST" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2117,7 +2117,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_STENCIL_BUFFER" bias="2" length="5">
+  <instruction name="3DSTATE_STENCIL_BUFFER" bias="2" length="5" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2131,7 +2131,7 @@
     <field name="Surface QPitch" start="128" end="142" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_STREAMOUT" bias="2" length="5">
+  <instruction name="3DSTATE_STREAMOUT" bias="2" length="5" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2164,7 +2164,7 @@
     <field name="Buffer 2 Surface Pitch" start="128" end="139" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_TE" bias="2" length="4">
+  <instruction name="3DSTATE_TE" bias="2" length="4" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2194,7 +2194,7 @@
     <field name="Maximum Tessellation Factor Not Odd" start="96" end="127" type="float"/>
   </instruction>
 
-  <instruction name="3DSTATE_URB_CLEAR" bias="2" length="2">
+  <instruction name="3DSTATE_URB_CLEAR" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2204,7 +2204,7 @@
     <field name="URB Address" start="32" end="46" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_URB_DS" bias="2" length="2">
+  <instruction name="3DSTATE_URB_DS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2215,7 +2215,7 @@
     <field name="DS Number of URB Entries" start="32" end="47" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_URB_GS" bias="2" length="2">
+  <instruction name="3DSTATE_URB_GS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2226,7 +2226,7 @@
     <field name="GS Number of URB Entries" start="32" end="47" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_URB_HS" bias="2" length="2">
+  <instruction name="3DSTATE_URB_HS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2237,7 +2237,7 @@
     <field name="HS Number of URB Entries" start="32" end="47" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_URB_VS" bias="2" length="2">
+  <instruction name="3DSTATE_URB_VS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2248,7 +2248,7 @@
     <field name="VS Number of URB Entries" start="32" end="47" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_VERTEX_BUFFERS" bias="2">
+  <instruction name="3DSTATE_VERTEX_BUFFERS" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2259,7 +2259,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_VERTEX_ELEMENTS" bias="2">
+  <instruction name="3DSTATE_VERTEX_ELEMENTS" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2270,7 +2270,7 @@
     </group>
   </instruction>
 
-  <instruction name="3DSTATE_VF" bias="2" length="2">
+  <instruction name="3DSTATE_VF" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2283,7 +2283,7 @@
     <field name="Cut Index" start="32" end="63" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_VF_COMPONENT_PACKING" bias="2" length="5">
+  <instruction name="3DSTATE_VF_COMPONENT_PACKING" bias="2" length="5" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2323,7 +2323,7 @@
     <field name="Vertex Element 24 Enables" start="128" end="131" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_VF_INSTANCING" bias="2" length="3">
+  <instruction name="3DSTATE_VF_INSTANCING" bias="2" length="3" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2334,7 +2334,7 @@
     <field name="Instance Data Step Rate" start="64" end="95" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_VF_SGVS" bias="2" length="2">
+  <instruction name="3DSTATE_VF_SGVS" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2358,7 +2358,7 @@
     <field name="VertexID Element Offset" start="32" end="37" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_VF_SGVS_2" bias="2" length="3">
+  <instruction name="3DSTATE_VF_SGVS_2" bias="2" length="3" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2398,7 +2398,7 @@
     <field name="XP2 Element Offset" start="64" end="69" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_VF_STATISTICS" bias="1" length="1">
+  <instruction name="3DSTATE_VF_STATISTICS" bias="1" length="1" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="1"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2406,7 +2406,7 @@
     <field name="Statistics Enable" start="0" end="0" type="bool"/>
   </instruction>
 
-  <instruction name="3DSTATE_VF_TOPOLOGY" bias="2" length="2">
+  <instruction name="3DSTATE_VF_TOPOLOGY" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2415,7 +2415,7 @@
     <field name="Primitive Topology Type" start="32" end="37" type="3D_Prim_Topo_Type"/>
   </instruction>
 
-  <instruction name="3DSTATE_VIEWPORT_STATE_POINTERS_CC" bias="2" length="2">
+  <instruction name="3DSTATE_VIEWPORT_STATE_POINTERS_CC" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2424,7 +2424,7 @@
     <field name="CC Viewport Pointer" start="37" end="63" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_VIEWPORT_STATE_POINTERS_SF_CLIP" bias="2" length="2">
+  <instruction name="3DSTATE_VIEWPORT_STATE_POINTERS_SF_CLIP" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2433,7 +2433,7 @@
     <field name="SF Clip Viewport Pointer" start="38" end="63" type="offset"/>
   </instruction>
 
-  <instruction name="3DSTATE_VS" bias="2" length="9">
+  <instruction name="3DSTATE_VS" bias="2" length="9" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2476,7 +2476,7 @@
     <field name="User Clip Distance Cull Test Enable Bitmask" start="256" end="263" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_WM" bias="2" length="2">
+  <instruction name="3DSTATE_WM" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2533,7 +2533,7 @@
     </field>
   </instruction>
 
-  <instruction name="3DSTATE_WM_CHROMAKEY" bias="2" length="2">
+  <instruction name="3DSTATE_WM_CHROMAKEY" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2542,7 +2542,7 @@
     <field name="ChromaKey Kill Enable" start="63" end="63" type="bool"/>
   </instruction>
 
-  <instruction name="3DSTATE_WM_DEPTH_STENCIL" bias="2" length="4">
+  <instruction name="3DSTATE_WM_DEPTH_STENCIL" bias="2" length="4" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2570,7 +2570,7 @@
     <field name="Backface Stencil Reference Value" start="96" end="103" type="uint"/>
   </instruction>
 
-  <instruction name="3DSTATE_WM_HZ_OP" bias="2" length="5">
+  <instruction name="3DSTATE_WM_HZ_OP" bias="2" length="5" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2592,7 +2592,7 @@
     <field name="Sample Mask" start="128" end="143" type="uint"/>
   </instruction>
 
-  <instruction name="GPGPU_WALKER" bias="2" length="15">
+  <instruction name="GPGPU_WALKER" bias="2" length="15" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Pipeline" start="27" end="28" type="uint" default="2"/>
     <field name="Media Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2621,7 +2621,7 @@
     <field name="Bottom Execution Mask" start="448" end="479" type="uint"/>
   </instruction>
 
-  <instruction name="MEDIA_CURBE_LOAD" bias="2" length="4">
+  <instruction name="MEDIA_CURBE_LOAD" bias="2" length="4" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Pipeline" start="27" end="28" type="uint" default="2"/>
     <field name="Media Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2631,7 +2631,7 @@
     <field name="CURBE Data Start Address" start="96" end="127" type="uint"/>
   </instruction>
 
-  <instruction name="MEDIA_INTERFACE_DESCRIPTOR_LOAD" bias="2" length="4">
+  <instruction name="MEDIA_INTERFACE_DESCRIPTOR_LOAD" bias="2" length="4" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Pipeline" start="27" end="28" type="uint" default="2"/>
     <field name="Media Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2641,7 +2641,7 @@
     <field name="Interface Descriptor Data Start Address" start="96" end="127" type="offset"/>
   </instruction>
 
-  <instruction name="MEDIA_OBJECT" bias="2">
+  <instruction name="MEDIA_OBJECT" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Media Command Pipeline" start="27" end="28" type="uint" default="2"/>
     <field name="Media Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2676,7 +2676,7 @@
     </group>
   </instruction>
 
-  <instruction name="MEDIA_OBJECT_GRPID" bias="2">
+  <instruction name="MEDIA_OBJECT_GRPID" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Media Command Pipeline" start="27" end="28" type="uint" default="2"/>
     <field name="Media Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2695,7 +2695,7 @@
     </group>
   </instruction>
 
-  <instruction name="MEDIA_OBJECT_PRT" bias="2" length="16">
+  <instruction name="MEDIA_OBJECT_PRT" bias="2" length="16" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Pipeline" start="27" end="28" type="uint" default="2"/>
     <field name="Media Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2713,7 +2713,7 @@
     </group>
   </instruction>
 
-  <instruction name="MEDIA_OBJECT_WALKER" bias="2">
+  <instruction name="MEDIA_OBJECT_WALKER" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Pipeline" start="27" end="28" type="uint" default="2"/>
     <field name="Media Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -2762,7 +2762,7 @@
     </group>
   </instruction>
 
-  <instruction name="MEDIA_STATE_FLUSH" bias="2" length="2">
+  <instruction name="MEDIA_STATE_FLUSH" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Pipeline" start="27" end="28" type="uint" default="2"/>
     <field name="Media Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2772,7 +2772,7 @@
     <field name="Interface Descriptor Offset" start="32" end="37" type="uint"/>
   </instruction>
 
-  <instruction name="MEDIA_VFE_STATE" bias="2" length="9">
+  <instruction name="MEDIA_VFE_STATE" bias="2" length="9" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Pipeline" start="27" end="28" type="uint" default="2"/>
     <field name="Media Command Opcode" start="24" end="26" type="uint" default="0"/>
@@ -2857,7 +2857,7 @@
     <field name="Batch Buffer Start Address" start="34" end="95" type="address"/>
   </instruction>
 
-  <instruction name="MI_CLFLUSH" bias="2">
+  <instruction name="MI_CLFLUSH" bias="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="0"/>
     <field name="MI Command Opcode" start="23" end="28" type="uint" default="39"/>
     <field name="Use Global GTT" start="22" end="22" type="bool"/>
@@ -2893,7 +2893,7 @@
     <field name="Source Memory Address" start="98" end="159" type="address"/>
   </instruction>
 
-  <instruction name="MI_DISPLAY_FLIP" bias="2" length="3">
+  <instruction name="MI_DISPLAY_FLIP" bias="2" length="3" engine="render|blitter">
     <field name="Command Type" start="29" end="31" type="uint" default="0"/>
     <field name="MI Command Opcode" start="23" end="28" type="uint" default="20"/>
     <field name="Async Flip Indicator" start="22" end="22" type="bool"/>
@@ -2993,7 +2993,7 @@
     <field name="Destination Register Address" start="66" end="86" type="offset"/>
   </instruction>
 
-  <instruction name="MI_LOAD_SCAN_LINES_EXCL" bias="2" length="2">
+  <instruction name="MI_LOAD_SCAN_LINES_EXCL" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="0"/>
     <field name="MI Command Opcode" start="23" end="28" type="uint" default="19"/>
     <field name="Display (Plane) Select" start="19" end="21" type="uint">
@@ -3007,7 +3007,7 @@
     <field name="End Scan Line Number" start="32" end="44" type="uint"/>
   </instruction>
 
-  <instruction name="MI_LOAD_SCAN_LINES_INCL" bias="2" length="2">
+  <instruction name="MI_LOAD_SCAN_LINES_INCL" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="0"/>
     <field name="MI Command Opcode" start="23" end="28" type="uint" default="18"/>
     <field name="Display (Plane) Select" start="19" end="21" type="uint">
@@ -3063,7 +3063,7 @@
     <field name="MI Command Opcode" start="23" end="28" type="uint" default="7"/>
   </instruction>
 
-  <instruction name="MI_REPORT_PERF_COUNT" bias="2" length="4">
+  <instruction name="MI_REPORT_PERF_COUNT" bias="2" length="4" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="0"/>
     <field name="MI Command Opcode" start="23" end="28" type="uint" default="40"/>
     <field name="DWord Length" start="0" end="5" type="uint" default="2"/>
@@ -3073,7 +3073,7 @@
     <field name="Report ID" start="96" end="127" type="uint"/>
   </instruction>
 
-  <instruction name="MI_RS_CONTEXT" bias="1" length="1">
+  <instruction name="MI_RS_CONTEXT" bias="1" length="1" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="0"/>
     <field name="MI Command Opcode" start="23" end="28" type="uint" default="15"/>
     <field name="Resource Streamer Save" start="0" end="0" type="uint" prefix="RS">
@@ -3082,7 +3082,7 @@
     </field>
   </instruction>
 
-  <instruction name="MI_RS_CONTROL" bias="1" length="1">
+  <instruction name="MI_RS_CONTROL" bias="1" length="1" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="0"/>
     <field name="MI Command Opcode" start="23" end="28" type="uint" default="6"/>
     <field name="Resource Streamer Control" start="0" end="0" type="uint" prefix="RS">
@@ -3091,7 +3091,7 @@
     </field>
   </instruction>
 
-  <instruction name="MI_RS_STORE_DATA_IMM" bias="2" length="4">
+  <instruction name="MI_RS_STORE_DATA_IMM" bias="2" length="4" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="0"/>
     <field name="MI Command Opcode" start="23" end="28" type="uint" default="43"/>
     <field name="DWord Length" start="0" end="7" type="uint" default="2"/>
@@ -3149,7 +3149,7 @@
     <field name="Semaphore Address" start="66" end="127" type="address"/>
   </instruction>
 
-  <instruction name="MI_SET_CONTEXT" bias="2" length="2">
+  <instruction name="MI_SET_CONTEXT" bias="2" length="2" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="0"/>
     <field name="MI Command Opcode" start="23" end="28" type="uint" default="24"/>
     <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
@@ -3213,7 +3213,7 @@
     <field name="Suspend Flush" start="0" end="0" type="bool"/>
   </instruction>
 
-  <instruction name="MI_TOPOLOGY_FILTER" bias="1" length="1">
+  <instruction name="MI_TOPOLOGY_FILTER" bias="1" length="1" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="0"/>
     <field name="MI Command Opcode" start="23" end="28" type="uint" default="13"/>
     <field name="Topology Filter Value" start="0" end="5" type="3D_Prim_Topo_Type"/>
@@ -3224,7 +3224,7 @@
     <field name="MI Command Opcode" start="23" end="28" type="uint" default="2"/>
   </instruction>
 
-  <instruction name="MI_WAIT_FOR_EVENT" bias="1" length="1">
+  <instruction name="MI_WAIT_FOR_EVENT" bias="1" length="1" engine="render|blitter">
     <field name="Command Type" start="29" end="31" type="uint" default="0"/>
     <field name="MI Command Opcode" start="23" end="28" type="uint" default="3"/>
     <field name="Display Plane 1 C Vertical Blank Wait Enable" start="21" end="21" type="bool"/>
@@ -3247,7 +3247,7 @@
     <field name="Display Plnae 1 A Scan Line Wait Enable" start="0" end="0" type="bool"/>
   </instruction>
 
-  <instruction name="MI_WAIT_FOR_EVENT_2" bias="1" length="1">
+  <instruction name="MI_WAIT_FOR_EVENT_2" bias="1" length="1" engine="render|blitter">
     <field name="Command Type" start="29" end="31" type="uint" default="0"/>
     <field name="MI Command Opcode" start="23" end="28" type="uint" default="4"/>
     <field name="Display Pipe Scan Line Wait Enable" start="12" end="14" type="uint"/>
@@ -3255,7 +3255,7 @@
     <field name="Display Plane Flip Pending Wait Enable" start="0" end="5" type="uint"/>
   </instruction>
 
-  <instruction name="PIPELINE_SELECT" bias="1" length="1">
+  <instruction name="PIPELINE_SELECT" bias="1" length="1" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="1"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -3270,7 +3270,7 @@
     </field>
   </instruction>
 
-  <instruction name="PIPE_CONTROL" bias="2" length="6">
+  <instruction name="PIPE_CONTROL" bias="2" length="6" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="2"/>
@@ -3314,7 +3314,7 @@
     <field name="Immediate Data" start="128" end="191" type="uint"/>
   </instruction>
 
-  <instruction name="STATE_BASE_ADDRESS" bias="2" length="22">
+  <instruction name="STATE_BASE_ADDRESS" bias="2" length="22" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="0"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
@@ -3354,7 +3354,7 @@
     <field name="Bindless Sampler State Buffer Size" start="684" end="703" type="uint"/>
   </instruction>
 
-  <instruction name="STATE_SIP" bias="2" length="3">
+  <instruction name="STATE_SIP" bias="2" length="3" engine="render">
     <field name="Command Type" start="29" end="31" type="uint" default="3"/>
     <field name="Command SubType" start="27" end="28" type="uint" default="0"/>
     <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>