i965: Move the back-end compiler to src/intel/compiler

Mostly a dummy git mv with a couple of noticable parts:
 - With the earlier header cleanups, nothing in src/intel depends
files from src/mesa/drivers/dri/i965/
 - Both Autoconf and Android builds are addressed. Thanks to Mauro and
Tapani for the fixups in the latter
 - brw_util.[ch] is not really compiler specific, so it's moved to i965.

v2:
 - move brw_eu_defines.h instead of brw_defines.h
 - remove no-longer applicable includes
 - add missing vulkan/ prefix in the Android build (thanks Tapani)

v3:
 - don't list brw_defines.h in src/intel/Makefile.sources (Jason)
 - rebase on top of the oa patches

[Emil Velikov: commit message, various small fixes througout]
Signed-off-by: Emil Velikov <[email protected]>
Reviewed-by: Jason Ekstrand <[email protected]>

1 files changed, 869 insertions, 0 deletions

diff --git a/src/intel/compiler/brw_fs_copy_propagation.cpp b/src/intel/compiler/brw_fs_copy_propagation.cpp
new file mode 100644
index 00000000000..cb117396089
--- /dev/null
+++ b/src/intel/compiler/brw_fs_copy_propagation.cpp
@@ -0,0 +1,869 @@
+/*
+ * Copyright © 2012 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+/** @file brw_fs_copy_propagation.cpp
+ *
+ * Support for global copy propagation in two passes: A local pass that does
+ * intra-block copy (and constant) propagation, and a global pass that uses
+ * dataflow analysis on the copies available at the end of each block to re-do
+ * local copy propagation with more copies available.
+ *
+ * See Muchnick's Advanced Compiler Design and Implementation, section
+ * 12.5 (p356).
+ */
+
+#define ACP_HASH_SIZE 16
+
+#include "util/bitset.h"
+#include "brw_fs.h"
+#include "brw_cfg.h"
+#include "brw_eu.h"
+
+namespace { /* avoid conflict with opt_copy_propagation_elements */
+struct acp_entry : public exec_node {
+   fs_reg dst;
+   fs_reg src;
+   uint8_t size_written;
+   uint8_t size_read;
+   enum opcode opcode;
+   bool saturate;
+};
+
+struct block_data {
+   /**
+    * Which entries in the fs_copy_prop_dataflow acp table are live at the
+    * start of this block.  This is the useful output of the analysis, since
+    * it lets us plug those into the local copy propagation on the second
+    * pass.
+    */
+   BITSET_WORD *livein;
+
+   /**
+    * Which entries in the fs_copy_prop_dataflow acp table are live at the end
+    * of this block.  This is done in initial setup from the per-block acps
+    * returned by the first local copy prop pass.
+    */
+   BITSET_WORD *liveout;
+
+   /**
+    * Which entries in the fs_copy_prop_dataflow acp table are generated by
+    * instructions in this block which reach the end of the block without
+    * being killed.
+    */
+   BITSET_WORD *copy;
+
+   /**
+    * Which entries in the fs_copy_prop_dataflow acp table are killed over the
+    * course of this block.
+    */
+   BITSET_WORD *kill;
+};
+
+class fs_copy_prop_dataflow
+{
+public:
+   fs_copy_prop_dataflow(void *mem_ctx, cfg_t *cfg,
+                         exec_list *out_acp[ACP_HASH_SIZE]);
+
+   void setup_initial_values();
+   void run();
+
+   void dump_block_data() const UNUSED;
+
+   void *mem_ctx;
+   cfg_t *cfg;
+
+   acp_entry **acp;
+   int num_acp;
+   int bitset_words;
+
+  struct block_data *bd;
+};
+} /* anonymous namespace */
+
+fs_copy_prop_dataflow::fs_copy_prop_dataflow(void *mem_ctx, cfg_t *cfg,
+                                             exec_list *out_acp[ACP_HASH_SIZE])
+   : mem_ctx(mem_ctx), cfg(cfg)
+{
+   bd = rzalloc_array(mem_ctx, struct block_data, cfg->num_blocks);
+
+   num_acp = 0;
+   foreach_block (block, cfg) {
+      for (int i = 0; i < ACP_HASH_SIZE; i++) {
+         num_acp += out_acp[block->num][i].length();
+      }
+   }
+
+   acp = rzalloc_array(mem_ctx, struct acp_entry *, num_acp);
+
+   bitset_words = BITSET_WORDS(num_acp);
+
+   int next_acp = 0;
+   foreach_block (block, cfg) {
+      bd[block->num].livein = rzalloc_array(bd, BITSET_WORD, bitset_words);
+      bd[block->num].liveout = rzalloc_array(bd, BITSET_WORD, bitset_words);
+      bd[block->num].copy = rzalloc_array(bd, BITSET_WORD, bitset_words);
+      bd[block->num].kill = rzalloc_array(bd, BITSET_WORD, bitset_words);
+
+      for (int i = 0; i < ACP_HASH_SIZE; i++) {
+         foreach_in_list(acp_entry, entry, &out_acp[block->num][i]) {
+            acp[next_acp] = entry;
+
+            /* opt_copy_propagation_local populates out_acp with copies created
+             * in a block which are still live at the end of the block.  This
+             * is exactly what we want in the COPY set.
+             */
+            BITSET_SET(bd[block->num].copy, next_acp);
+
+            next_acp++;
+         }
+      }
+   }
+
+   assert(next_acp == num_acp);
+
+   setup_initial_values();
+   run();
+}
+
+/**
+ * Set up initial values for each of the data flow sets, prior to running
+ * the fixed-point algorithm.
+ */
+void
+fs_copy_prop_dataflow::setup_initial_values()
+{
+   /* Initialize the COPY and KILL sets. */
+   foreach_block (block, cfg) {
+      foreach_inst_in_block(fs_inst, inst, block) {
+         if (inst->dst.file != VGRF)
+            continue;
+
+         /* Mark ACP entries which are killed by this instruction. */
+         for (int i = 0; i < num_acp; i++) {
+            if (regions_overlap(inst->dst, inst->size_written,
+                                acp[i]->dst, acp[i]->size_written) ||
+                regions_overlap(inst->dst, inst->size_written,
+                                acp[i]->src, acp[i]->size_read)) {
+               BITSET_SET(bd[block->num].kill, i);
+            }
+         }
+      }
+   }
+
+   /* Populate the initial values for the livein and liveout sets.  For the
+    * block at the start of the program, livein = 0 and liveout = copy.
+    * For the others, set liveout to 0 (the empty set) and livein to ~0
+    * (the universal set).
+    */
+   foreach_block (block, cfg) {
+      if (block->parents.is_empty()) {
+         for (int i = 0; i < bitset_words; i++) {
+            bd[block->num].livein[i] = 0u;
+            bd[block->num].liveout[i] = bd[block->num].copy[i];
+         }
+      } else {
+         for (int i = 0; i < bitset_words; i++) {
+            bd[block->num].liveout[i] = 0u;
+            bd[block->num].livein[i] = ~0u;
+         }
+      }
+   }
+}
+
+/**
+ * Walk the set of instructions in the block, marking which entries in the acp
+ * are killed by the block.
+ */
+void
+fs_copy_prop_dataflow::run()
+{
+   bool progress;
+
+   do {
+      progress = false;
+
+      /* Update liveout for all blocks. */
+      foreach_block (block, cfg) {
+         if (block->parents.is_empty())
+            continue;
+
+         for (int i = 0; i < bitset_words; i++) {
+            const BITSET_WORD old_liveout = bd[block->num].liveout[i];
+
+            bd[block->num].liveout[i] =
+               bd[block->num].copy[i] | (bd[block->num].livein[i] &
+                                         ~bd[block->num].kill[i]);
+
+            if (old_liveout != bd[block->num].liveout[i])
+               progress = true;
+         }
+      }
+
+      /* Update livein for all blocks.  If a copy is live out of all parent
+       * blocks, it's live coming in to this block.
+       */
+      foreach_block (block, cfg) {
+         if (block->parents.is_empty())
+            continue;
+
+         for (int i = 0; i < bitset_words; i++) {
+            const BITSET_WORD old_livein = bd[block->num].livein[i];
+
+            bd[block->num].livein[i] = ~0u;
+            foreach_list_typed(bblock_link, parent_link, link, &block->parents) {
+               bblock_t *parent = parent_link->block;
+               bd[block->num].livein[i] &= bd[parent->num].liveout[i];
+            }
+
+            if (old_livein != bd[block->num].livein[i])
+               progress = true;
+         }
+      }
+   } while (progress);
+}
+
+void
+fs_copy_prop_dataflow::dump_block_data() const
+{
+   foreach_block (block, cfg) {
+      fprintf(stderr, "Block %d [%d, %d] (parents ", block->num,
+             block->start_ip, block->end_ip);
+      foreach_list_typed(bblock_link, link, link, &block->parents) {
+         bblock_t *parent = link->block;
+         fprintf(stderr, "%d ", parent->num);
+      }
+      fprintf(stderr, "):\n");
+      fprintf(stderr, "       livein = 0x");
+      for (int i = 0; i < bitset_words; i++)
+         fprintf(stderr, "%08x", bd[block->num].livein[i]);
+      fprintf(stderr, ", liveout = 0x");
+      for (int i = 0; i < bitset_words; i++)
+         fprintf(stderr, "%08x", bd[block->num].liveout[i]);
+      fprintf(stderr, ",\n       copy   = 0x");
+      for (int i = 0; i < bitset_words; i++)
+         fprintf(stderr, "%08x", bd[block->num].copy[i]);
+      fprintf(stderr, ", kill    = 0x");
+      for (int i = 0; i < bitset_words; i++)
+         fprintf(stderr, "%08x", bd[block->num].kill[i]);
+      fprintf(stderr, "\n");
+   }
+}
+
+static bool
+is_logic_op(enum opcode opcode)
+{
+   return (opcode == BRW_OPCODE_AND ||
+           opcode == BRW_OPCODE_OR  ||
+           opcode == BRW_OPCODE_XOR ||
+           opcode == BRW_OPCODE_NOT);
+}
+
+static bool
+can_take_stride(fs_inst *inst, unsigned arg, unsigned stride,
+                const gen_device_info *devinfo)
+{
+   if (stride > 4)
+      return false;
+
+   /* 3-source instructions can only be Align16, which restricts what strides
+    * they can take. They can only take a stride of 1 (the usual case), or 0
+    * with a special "repctrl" bit. But the repctrl bit doesn't work for
+    * 64-bit datatypes, so if the source type is 64-bit then only a stride of
+    * 1 is allowed. From the Broadwell PRM, Volume 7 "3D Media GPGPU", page
+    * 944:
+    *
+    *    This is applicable to 32b datatypes and 16b datatype. 64b datatypes
+    *    cannot use the replicate control.
+    */
+   if (inst->is_3src(devinfo)) {
+      if (type_sz(inst->src[arg].type) > 4)
+         return stride == 1;
+      else
+         return stride == 1 || stride == 0;
+   }
+
+   /* From the Broadwell PRM, Volume 2a "Command Reference - Instructions",
+    * page 391 ("Extended Math Function"):
+    *
+    *     The following restrictions apply for align1 mode: Scalar source is
+    *     supported. Source and destination horizontal stride must be the
+    *     same.
+    *
+    * From the Haswell PRM Volume 2b "Command Reference - Instructions", page
+    * 134 ("Extended Math Function"):
+    *
+    *    Scalar source is supported. Source and destination horizontal stride
+    *    must be 1.
+    *
+    * and similar language exists for IVB and SNB. Pre-SNB, math instructions
+    * are sends, so the sources are moved to MRF's and there are no
+    * restrictions.
+    */
+   if (inst->is_math()) {
+      if (devinfo->gen == 6 || devinfo->gen == 7) {
+         assert(inst->dst.stride == 1);
+         return stride == 1 || stride == 0;
+      } else if (devinfo->gen >= 8) {
+         return stride == inst->dst.stride || stride == 0;
+      }
+   }
+
+   return true;
+}
+
+bool
+fs_visitor::try_copy_propagate(fs_inst *inst, int arg, acp_entry *entry)
+{
+   if (inst->src[arg].file != VGRF)
+      return false;
+
+   if (entry->src.file == IMM)
+      return false;
+   assert(entry->src.file == VGRF || entry->src.file == UNIFORM ||
+          entry->src.file == ATTR);
+
+   if (entry->opcode == SHADER_OPCODE_LOAD_PAYLOAD &&
+       inst->opcode == SHADER_OPCODE_LOAD_PAYLOAD)
+      return false;
+
+   assert(entry->dst.file == VGRF);
+   if (inst->src[arg].nr != entry->dst.nr)
+      return false;
+
+   /* Bail if inst is reading a range that isn't contained in the range
+    * that entry is writing.
+    */
+   if (!region_contained_in(inst->src[arg], inst->size_read(arg),
+                            entry->dst, entry->size_written))
+      return false;
+
+   /* we can't generally copy-propagate UD negations because we
+    * can end up accessing the resulting values as signed integers
+    * instead. See also resolve_ud_negate() and comment in
+    * fs_generator::generate_code.
+    */
+   if (entry->src.type == BRW_REGISTER_TYPE_UD &&
+       entry->src.negate)
+      return false;
+
+   bool has_source_modifiers = entry->src.abs || entry->src.negate;
+
+   if ((has_source_modifiers || entry->src.file == UNIFORM ||
+        !entry->src.is_contiguous()) &&
+       !inst->can_do_source_mods(devinfo))
+      return false;
+
+   if (has_source_modifiers &&
+       inst->opcode == SHADER_OPCODE_GEN4_SCRATCH_WRITE)
+      return false;
+
+   /* Bail if the result of composing both strides would exceed the
+    * hardware limit.
+    */
+   if (!can_take_stride(inst, arg, entry->src.stride * inst->src[arg].stride,
+                        devinfo))
+      return false;
+
+   /* Bail if the instruction type is larger than the execution type of the
+    * copy, what implies that each channel is reading multiple channels of the
+    * destination of the copy, and simply replacing the sources would give a
+    * program with different semantics.
+    */
+   if (type_sz(entry->dst.type) < type_sz(inst->src[arg].type))
+      return false;
+
+   /* Bail if the result of composing both strides cannot be expressed
+    * as another stride. This avoids, for example, trying to transform
+    * this:
+    *
+    *     MOV (8) rX<1>UD rY<0;1,0>UD
+    *     FOO (8) ...     rX<8;8,1>UW
+    *
+    * into this:
+    *
+    *     FOO (8) ...     rY<0;1,0>UW
+    *
+    * Which would have different semantics.
+    */
+   if (entry->src.stride != 1 &&
+       (inst->src[arg].stride *
+        type_sz(inst->src[arg].type)) % type_sz(entry->src.type) != 0)
+      return false;
+
+   /* Since semantics of source modifiers are type-dependent we need to
+    * ensure that the meaning of the instruction remains the same if we
+    * change the type. If the sizes of the types are different the new
+    * instruction will read a different amount of data than the original
+    * and the semantics will always be different.
+    */
+   if (has_source_modifiers &&
+       entry->dst.type != inst->src[arg].type &&
+       (!inst->can_change_types() ||
+        type_sz(entry->dst.type) != type_sz(inst->src[arg].type)))
+      return false;
+
+   if (devinfo->gen >= 8 && (entry->src.negate || entry->src.abs) &&
+       is_logic_op(inst->opcode)) {
+      return false;
+   }
+
+   if (entry->saturate) {
+      switch(inst->opcode) {
+      case BRW_OPCODE_SEL:
+         if ((inst->conditional_mod != BRW_CONDITIONAL_GE &&
+              inst->conditional_mod != BRW_CONDITIONAL_L) ||
+             inst->src[1].file != IMM ||
+             inst->src[1].f < 0.0 ||
+             inst->src[1].f > 1.0) {
+            return false;
+         }
+         break;
+      default:
+         return false;
+      }
+   }
+
+   inst->src[arg].file = entry->src.file;
+   inst->src[arg].nr = entry->src.nr;
+   inst->src[arg].stride *= entry->src.stride;
+   inst->saturate = inst->saturate || entry->saturate;
+
+   /* Compute the offset of inst->src[arg] relative to entry->dst */
+   const unsigned rel_offset = inst->src[arg].offset - entry->dst.offset;
+
+   /* Compute the first component of the copy that the instruction is
+    * reading, and the base byte offset within that component.
+    */
+   assert(entry->dst.offset % REG_SIZE == 0 && entry->dst.stride == 1);
+   const unsigned component = rel_offset / type_sz(entry->dst.type);
+   const unsigned suboffset = rel_offset % type_sz(entry->dst.type);
+
+   /* Calculate the byte offset at the origin of the copy of the given
+    * component and suboffset.
+    */
+   inst->src[arg].offset = suboffset +
+      component * entry->src.stride * type_sz(entry->src.type) +
+      entry->src.offset;
+
+   if (has_source_modifiers) {
+      if (entry->dst.type != inst->src[arg].type) {
+         /* We are propagating source modifiers from a MOV with a different
+          * type.  If we got here, then we can just change the source and
+          * destination types of the instruction and keep going.
+          */
+         assert(inst->can_change_types());
+         for (int i = 0; i < inst->sources; i++) {
+            inst->src[i].type = entry->dst.type;
+         }
+         inst->dst.type = entry->dst.type;
+      }
+
+      if (!inst->src[arg].abs) {
+         inst->src[arg].abs = entry->src.abs;
+         inst->src[arg].negate ^= entry->src.negate;
+      }
+   }
+
+   return true;
+}
+
+
+bool
+fs_visitor::try_constant_propagate(fs_inst *inst, acp_entry *entry)
+{
+   bool progress = false;
+
+   if (entry->src.file != IMM)
+      return false;
+   if (type_sz(entry->src.type) > 4)
+      return false;
+   if (entry->saturate)
+      return false;
+
+   for (int i = inst->sources - 1; i >= 0; i--) {
+      if (inst->src[i].file != VGRF)
+         continue;
+
+      assert(entry->dst.file == VGRF);
+      if (inst->src[i].nr != entry->dst.nr)
+         continue;
+
+      /* Bail if inst is reading a range that isn't contained in the range
+       * that entry is writing.
+       */
+      if (!region_contained_in(inst->src[i], inst->size_read(i),
+                               entry->dst, entry->size_written))
+         continue;
+
+      /* If the type sizes don't match each channel of the instruction is
+       * either extracting a portion of the constant (which could be handled
+       * with some effort but the code below doesn't) or reading multiple
+       * channels of the source at once.
+       */
+      if (type_sz(inst->src[i].type) != type_sz(entry->dst.type))
+         continue;
+
+      fs_reg val = entry->src;
+      val.type = inst->src[i].type;
+
+      if (inst->src[i].abs) {
+         if ((devinfo->gen >= 8 && is_logic_op(inst->opcode)) ||
+             !brw_abs_immediate(val.type, &val.as_brw_reg())) {
+            continue;
+         }
+      }
+
+      if (inst->src[i].negate) {
+         if ((devinfo->gen >= 8 && is_logic_op(inst->opcode)) ||
+             !brw_negate_immediate(val.type, &val.as_brw_reg())) {
+            continue;
+         }
+      }
+
+      switch (inst->opcode) {
+      case BRW_OPCODE_MOV:
+      case SHADER_OPCODE_LOAD_PAYLOAD:
+      case FS_OPCODE_PACK:
+         inst->src[i] = val;
+         progress = true;
+         break;
+
+      case SHADER_OPCODE_INT_QUOTIENT:
+      case SHADER_OPCODE_INT_REMAINDER:
+         /* FINISHME: Promote non-float constants and remove this. */
+         if (devinfo->gen < 8)
+            break;
+         /* fallthrough */
+      case SHADER_OPCODE_POW:
+         /* Allow constant propagation into src1 (except on Gen 6 which
+          * doesn't support scalar source math), and let constant combining
+          * promote the constant on Gen < 8.
+          */
+         if (devinfo->gen == 6)
+            break;
+         /* fallthrough */
+      case BRW_OPCODE_BFI1:
+      case BRW_OPCODE_ASR:
+      case BRW_OPCODE_SHL:
+      case BRW_OPCODE_SHR:
+      case BRW_OPCODE_SUBB:
+         if (i == 1) {
+            inst->src[i] = val;
+            progress = true;
+         }
+         break;
+
+      case BRW_OPCODE_MACH:
+      case BRW_OPCODE_MUL:
+      case SHADER_OPCODE_MULH:
+      case BRW_OPCODE_ADD:
+      case BRW_OPCODE_OR:
+      case BRW_OPCODE_AND:
+      case BRW_OPCODE_XOR:
+      case BRW_OPCODE_ADDC:
+         if (i == 1) {
+            inst->src[i] = val;
+            progress = true;
+         } else if (i == 0 && inst->src[1].file != IMM) {
+            /* Fit this constant in by commuting the operands.
+             * Exception: we can't do this for 32-bit integer MUL/MACH
+             * because it's asymmetric.
+             *
+             * The BSpec says for Broadwell that
+             *
+             *    "When multiplying DW x DW, the dst cannot be accumulator."
+             *
+             * Integer MUL with a non-accumulator destination will be lowered
+             * by lower_integer_multiplication(), so don't restrict it.
+             */
+            if (((inst->opcode == BRW_OPCODE_MUL &&
+                  inst->dst.is_accumulator()) ||
+                 inst->opcode == BRW_OPCODE_MACH) &&
+                (inst->src[1].type == BRW_REGISTER_TYPE_D ||
+                 inst->src[1].type == BRW_REGISTER_TYPE_UD))
+               break;
+            inst->src[0] = inst->src[1];
+            inst->src[1] = val;
+            progress = true;
+         }
+         break;
+
+      case BRW_OPCODE_CMP:
+      case BRW_OPCODE_IF:
+         if (i == 1) {
+            inst->src[i] = val;
+            progress = true;
+         } else if (i == 0 && inst->src[1].file != IMM) {
+            enum brw_conditional_mod new_cmod;
+
+            new_cmod = brw_swap_cmod(inst->conditional_mod);
+            if (new_cmod != BRW_CONDITIONAL_NONE) {
+               /* Fit this constant in by swapping the operands and
+                * flipping the test
+                */
+               inst->src[0] = inst->src[1];
+               inst->src[1] = val;
+               inst->conditional_mod = new_cmod;
+               progress = true;
+            }
+         }
+         break;
+
+      case BRW_OPCODE_SEL:
+         if (i == 1) {
+            inst->src[i] = val;
+            progress = true;
+         } else if (i == 0 && inst->src[1].file != IMM) {
+            inst->src[0] = inst->src[1];
+            inst->src[1] = val;
+
+            /* If this was predicated, flipping operands means
+             * we also need to flip the predicate.
+             */
+            if (inst->conditional_mod == BRW_CONDITIONAL_NONE) {
+               inst->predicate_inverse =
+                  !inst->predicate_inverse;
+            }
+            progress = true;
+         }
+         break;
+
+      case SHADER_OPCODE_UNTYPED_ATOMIC:
+      case SHADER_OPCODE_UNTYPED_SURFACE_READ:
+      case SHADER_OPCODE_UNTYPED_SURFACE_WRITE:
+      case SHADER_OPCODE_TYPED_ATOMIC:
+      case SHADER_OPCODE_TYPED_SURFACE_READ:
+      case SHADER_OPCODE_TYPED_SURFACE_WRITE:
+         /* We only propagate into the surface argument of the
+          * instruction. Everything else goes through LOAD_PAYLOAD.
+          */
+         if (i == 1) {
+            inst->src[i] = val;
+            progress = true;
+         }
+         break;
+
+      case FS_OPCODE_FB_WRITE_LOGICAL:
+         /* The stencil and omask sources of FS_OPCODE_FB_WRITE_LOGICAL are
+          * bit-cast using a strided region so they cannot be immediates.
+          */
+         if (i != FB_WRITE_LOGICAL_SRC_SRC_STENCIL &&
+             i != FB_WRITE_LOGICAL_SRC_OMASK) {
+            inst->src[i] = val;
+            progress = true;
+         }
+         break;
+
+      case SHADER_OPCODE_TEX_LOGICAL:
+      case SHADER_OPCODE_TXD_LOGICAL:
+      case SHADER_OPCODE_TXF_LOGICAL:
+      case SHADER_OPCODE_TXL_LOGICAL:
+      case SHADER_OPCODE_TXS_LOGICAL:
+      case FS_OPCODE_TXB_LOGICAL:
+      case SHADER_OPCODE_TXF_CMS_LOGICAL:
+      case SHADER_OPCODE_TXF_CMS_W_LOGICAL:
+      case SHADER_OPCODE_TXF_UMS_LOGICAL:
+      case SHADER_OPCODE_TXF_MCS_LOGICAL:
+      case SHADER_OPCODE_LOD_LOGICAL:
+      case SHADER_OPCODE_TG4_LOGICAL:
+      case SHADER_OPCODE_TG4_OFFSET_LOGICAL:
+      case SHADER_OPCODE_UNTYPED_ATOMIC_LOGICAL:
+      case SHADER_OPCODE_UNTYPED_SURFACE_READ_LOGICAL:
+      case SHADER_OPCODE_UNTYPED_SURFACE_WRITE_LOGICAL:
+      case SHADER_OPCODE_TYPED_ATOMIC_LOGICAL:
+      case SHADER_OPCODE_TYPED_SURFACE_READ_LOGICAL:
+      case SHADER_OPCODE_TYPED_SURFACE_WRITE_LOGICAL:
+         inst->src[i] = val;
+         progress = true;
+         break;
+
+      case FS_OPCODE_UNIFORM_PULL_CONSTANT_LOAD:
+      case SHADER_OPCODE_BROADCAST:
+         inst->src[i] = val;
+         progress = true;
+         break;
+
+      case BRW_OPCODE_MAD:
+      case BRW_OPCODE_LRP:
+         inst->src[i] = val;
+         progress = true;
+         break;
+
+      default:
+         break;
+      }
+   }
+
+   return progress;
+}
+
+static bool
+can_propagate_from(fs_inst *inst)
+{
+   return (inst->opcode == BRW_OPCODE_MOV &&
+           inst->dst.file == VGRF &&
+           ((inst->src[0].file == VGRF &&
+             !regions_overlap(inst->dst, inst->size_written,
+                              inst->src[0], inst->size_read(0))) ||
+            inst->src[0].file == ATTR ||
+            inst->src[0].file == UNIFORM ||
+            inst->src[0].file == IMM) &&
+           inst->src[0].type == inst->dst.type &&
+           !inst->is_partial_write());
+}
+
+/* Walks a basic block and does copy propagation on it using the acp
+ * list.
+ */
+bool
+fs_visitor::opt_copy_propagation_local(void *copy_prop_ctx, bblock_t *block,
+                                       exec_list *acp)
+{
+   bool progress = false;
+
+   foreach_inst_in_block(fs_inst, inst, block) {
+      /* Try propagating into this instruction. */
+      for (int i = 0; i < inst->sources; i++) {
+         if (inst->src[i].file != VGRF)
+            continue;
+
+         foreach_in_list(acp_entry, entry, &acp[inst->src[i].nr % ACP_HASH_SIZE]) {
+            if (try_constant_propagate(inst, entry))
+               progress = true;
+            else if (try_copy_propagate(inst, i, entry))
+               progress = true;
+         }
+      }
+
+      /* kill the destination from the ACP */
+      if (inst->dst.file == VGRF) {
+         foreach_in_list_safe(acp_entry, entry, &acp[inst->dst.nr % ACP_HASH_SIZE]) {
+            if (regions_overlap(entry->dst, entry->size_written,
+                                inst->dst, inst->size_written))
+               entry->remove();
+         }
+
+         /* Oops, we only have the chaining hash based on the destination, not
+          * the source, so walk across the entire table.
+          */
+         for (int i = 0; i < ACP_HASH_SIZE; i++) {
+            foreach_in_list_safe(acp_entry, entry, &acp[i]) {
+               /* Make sure we kill the entry if this instruction overwrites
+                * _any_ of the registers that it reads
+                */
+               if (regions_overlap(entry->src, entry->size_read,
+                                   inst->dst, inst->size_written))
+                  entry->remove();
+            }
+	 }
+      }
+
+      /* If this instruction's source could potentially be folded into the
+       * operand of another instruction, add it to the ACP.
+       */
+      if (can_propagate_from(inst)) {
+         acp_entry *entry = ralloc(copy_prop_ctx, acp_entry);
+         entry->dst = inst->dst;
+         entry->src = inst->src[0];
+         entry->size_written = inst->size_written;
+         entry->size_read = inst->size_read(0);
+         entry->opcode = inst->opcode;
+         entry->saturate = inst->saturate;
+         acp[entry->dst.nr % ACP_HASH_SIZE].push_tail(entry);
+      } else if (inst->opcode == SHADER_OPCODE_LOAD_PAYLOAD &&
+                 inst->dst.file == VGRF) {
+         int offset = 0;
+         for (int i = 0; i < inst->sources; i++) {
+            int effective_width = i < inst->header_size ? 8 : inst->exec_size;
+            assert(effective_width * type_sz(inst->src[i].type) % REG_SIZE == 0);
+            const unsigned size_written = effective_width *
+                                          type_sz(inst->src[i].type);
+            if (inst->src[i].file == VGRF) {
+               acp_entry *entry = rzalloc(copy_prop_ctx, acp_entry);
+               entry->dst = byte_offset(inst->dst, offset);
+               entry->src = inst->src[i];
+               entry->size_written = size_written;
+               entry->size_read = inst->size_read(i);
+               entry->opcode = inst->opcode;
+               if (!entry->dst.equals(inst->src[i])) {
+                  acp[entry->dst.nr % ACP_HASH_SIZE].push_tail(entry);
+               } else {
+                  ralloc_free(entry);
+               }
+            }
+            offset += size_written;
+         }
+      }
+   }
+
+   return progress;
+}
+
+bool
+fs_visitor::opt_copy_propagation()
+{
+   bool progress = false;
+   void *copy_prop_ctx = ralloc_context(NULL);
+   exec_list *out_acp[cfg->num_blocks];
+
+   for (int i = 0; i < cfg->num_blocks; i++)
+      out_acp[i] = new exec_list [ACP_HASH_SIZE];
+
+   /* First, walk through each block doing local copy propagation and getting
+    * the set of copies available at the end of the block.
+    */
+   foreach_block (block, cfg) {
+      progress = opt_copy_propagation_local(copy_prop_ctx, block,
+                                            out_acp[block->num]) || progress;
+   }
+
+   /* Do dataflow analysis for those available copies. */
+   fs_copy_prop_dataflow dataflow(copy_prop_ctx, cfg, out_acp);
+
+   /* Next, re-run local copy propagation, this time with the set of copies
+    * provided by the dataflow analysis available at the start of a block.
+    */
+   foreach_block (block, cfg) {
+      exec_list in_acp[ACP_HASH_SIZE];
+
+      for (int i = 0; i < dataflow.num_acp; i++) {
+         if (BITSET_TEST(dataflow.bd[block->num].livein, i)) {
+            struct acp_entry *entry = dataflow.acp[i];
+            in_acp[entry->dst.nr % ACP_HASH_SIZE].push_tail(entry);
+         }
+      }
+
+      progress = opt_copy_propagation_local(copy_prop_ctx, block, in_acp) ||
+                 progress;
+   }
+
+   for (int i = 0; i < cfg->num_blocks; i++)
+      delete [] out_acp[i];
+   ralloc_free(copy_prop_ctx);
+
+   if (progress)
+      invalidate_live_intervals();
+
+   return progress;
+}