gallium: make draw auto work and add relevant caps and docs

7 files changed, 43 insertions, 6 deletions

diff --git a/src/gallium/auxiliary/draw/draw_pt_so_emit.c b/src/gallium/auxiliary/draw/draw_pt_so_emit.c
index b982e4c529c..8a065a378be 100644
--- a/src/gallium/auxiliary/draw/draw_pt_so_emit.c
+++ b/src/gallium/auxiliary/draw/draw_pt_so_emit.c
@@ -163,6 +163,8 @@ void draw_pt_so_emit( struct pt_so_emit *emit,
                          stride, ~0);
    translate->run(translate, 0, vertex_count,
                   draw->instance_id, so_buffer);
+
+   render->set_stream_output_info(render, 0, vertex_count);
 }
 
 
diff --git a/src/gallium/auxiliary/draw/draw_vbuf.h b/src/gallium/auxiliary/draw/draw_vbuf.h
index 83ae26a9c2b..8d9768246ed 100644
--- a/src/gallium/auxiliary/draw/draw_vbuf.h
+++ b/src/gallium/auxiliary/draw/draw_vbuf.h
@@ -117,6 +117,14 @@ struct vbuf_render {
    void (*release_vertices)( struct vbuf_render * );
 
    void (*destroy)( struct vbuf_render * );
+
+
+   /**
+    * Called after writing data to the stream out buffers
+    */
+   void (*set_stream_output_info)( struct vbuf_render *vbufr,
+                                   unsigned buffer_index,
+                                   unsigned vertices_count );
 };
 
 
diff --git a/src/gallium/docs/d3d11ddi.txt b/src/gallium/docs/d3d11ddi.txt
index e3368fdbd69..0954c2926df 100644
--- a/src/gallium/docs/d3d11ddi.txt
+++ b/src/gallium/docs/d3d11ddi.txt
@@ -177,7 +177,7 @@ CreateElementLayout -> create_vertex_elements_state
 	! D3D11 has an extra flag (InputSlotClass) that is the same as instance_divisor == 0
 
 CreateGeometryShader -> create_gs_state
-CreateGeometryShaderWithStreamOutput -> create_gs_state
+CreateGeometryShaderWithStreamOutput -> create_gs_state + create_stream_output_state
 CreatePixelShader -> create_fs_state
 CreateVertexShader -> create_vs_state
 	> bytecode is different (see D3d10tokenizedprogramformat.hpp)
@@ -220,7 +220,6 @@ CreateResource -> texture_create or buffer_create
 	# Note that hardware often has the implicit rule, so the D3D11 interface seems to make little sense
 	# Also, the D3D11 API does not allow the user to specify mipmap sizes, so this really seems a dubious decision on Microsoft's part
 	- D3D11 supports specifying initial data to write in the resource
-	- Gallium lacks support for stream output buffer usage
 	- Gallium does not support unordered access buffers
 	! D3D11 specifies mapping flags (i.e. read/write/discard);:it's unclear what they are used for here
 	- D3D11 supports odd things in the D3D10_DDI_RESOURCE_MISC_FLAG enum (D3D10_DDI_RESOURCE_MISC_DISCARD_ON_PRESENT, D3D11_DDI_RESOURCE_MISC_BUFFER_ALLOW_RAW_VIEWS, D3D11_DDI_RESOURCE_MISC_BUFFER_STRUCTURED)
@@ -275,8 +274,7 @@ DispatchIndirect (D3D11 only)
 Draw -> draw_arrays
 	! D3D11 sets primitive modes separately with IaSetTopology: it's not obvious which is better
 
-DrawAuto
-	- Gallium lacks stream out and DrawAuto
+DrawAuto -> draw_auto
 
 DrawIndexed -> draw_elements
 	! D3D11 sets primitive modes separately with IaSetTopology: it's not obvious which is better
@@ -468,8 +466,7 @@ SetViewports
 ShaderResourceViewReadAfterWriteHazard -> flush(PIPE_FLUSH_RENDER_CACHE)
 	- Gallium does not support specifying this per-render-target/view
 
-SoSetTargets
-	- Gallium does not support stream out
+SoSetTargets -> set_stream_output_buffers
 
 VsSetConstantBuffers -> for(i = StartBuffer; i < NumBuffers; ++i) set_constant_buffer(PIPE_SHADER_VERTEX, i, phBuffers[i])
 	* may want to split into fragment/vertex-specific versions
diff --git a/src/gallium/docs/source/context.rst b/src/gallium/docs/source/context.rst
index 27d352b7a39..0242dedbf3b 100644
--- a/src/gallium/docs/source/context.rst
+++ b/src/gallium/docs/source/context.rst
@@ -295,6 +295,23 @@ for a driver to batch multiple blits with the same source and
 destination.
 
 
+Stream Output
+^^^^^^^^^^^^^
+
+Stream output, also known as transform feedback allows writing the results of the
+vertex pipeline (after the geometry shader or vertex shader if no geometry shader
+is present) to be written to a buffer created with a ``PIPE_BIND_STREAM_OUTPUT``
+flag.
+
+First a stream output state needs to be created with the
+``create_stream_output_state`` call. It specific the details of what's being written,
+to which buffer and with what kind of a writemask.
+
+Then target buffers needs to be set with the call to ``set_stream_output_buffers``
+which sets the buffers and the offsets from the start of those buffer to where
+the data will be written to.
+
+
 Transfers
 ^^^^^^^^^
 
diff --git a/src/gallium/drivers/softpipe/sp_prim_vbuf.c b/src/gallium/drivers/softpipe/sp_prim_vbuf.c
index db0d1755103..06691e83953 100644
--- a/src/gallium/drivers/softpipe/sp_prim_vbuf.c
+++ b/src/gallium/drivers/softpipe/sp_prim_vbuf.c
@@ -542,6 +542,15 @@ sp_vbuf_draw_arrays(struct vbuf_render *vbr, uint start, uint nr)
    }
 }
 
+static void
+sp_vbuf_so_info(struct vbuf_render *vbr, uint buffer, uint vertices)
+{
+   struct softpipe_vbuf_render *cvbr = softpipe_vbuf_render(vbr);
+   struct softpipe_context *softpipe = cvbr->softpipe;
+
+   softpipe->so_target.so_count[buffer] += vertices;
+}
+
 
 static void
 sp_vbuf_destroy(struct vbuf_render *vbr)
@@ -575,6 +584,7 @@ sp_create_vbuf_backend(struct softpipe_context *sp)
    cvbr->base.draw_elements = sp_vbuf_draw_elements;
    cvbr->base.draw_arrays = sp_vbuf_draw_arrays;
    cvbr->base.release_vertices = sp_vbuf_release_vertices;
+   cvbr->base.set_stream_output_info = sp_vbuf_so_info;
    cvbr->base.destroy = sp_vbuf_destroy;
 
    cvbr->softpipe = sp;
diff --git a/src/gallium/drivers/softpipe/sp_screen.c b/src/gallium/drivers/softpipe/sp_screen.c
index 8abe7f50e17..fc57d3eb611 100644
--- a/src/gallium/drivers/softpipe/sp_screen.c
+++ b/src/gallium/drivers/softpipe/sp_screen.c
@@ -115,6 +115,8 @@ softpipe_get_param(struct pipe_screen *screen, enum pipe_cap param)
    case PIPE_CAP_TGSI_FS_COORD_PIXEL_CENTER_HALF_INTEGER:
    case PIPE_CAP_TGSI_FS_COORD_PIXEL_CENTER_INTEGER:
       return 1;
+   case PIPE_CAP_STREAM_OUTPUT:
+      return 1;
 
    case PIPE_CAP_MAX_VS_INSTRUCTIONS:
    case PIPE_CAP_MAX_FS_INSTRUCTIONS:
diff --git a/src/gallium/include/pipe/p_defines.h b/src/gallium/include/pipe/p_defines.h
index be42c272221..f47db407dc1 100644
--- a/src/gallium/include/pipe/p_defines.h
+++ b/src/gallium/include/pipe/p_defines.h
@@ -447,6 +447,7 @@ enum pipe_cap {
    PIPE_CAP_TGSI_CONT_SUPPORTED,
    PIPE_CAP_BLEND_EQUATION_SEPARATE,
    PIPE_CAP_SM3,  /*< Shader Model, supported */
+   PIPE_CAP_STREAM_OUTPUT,
    PIPE_CAP_MAX_PREDICATE_REGISTERS,
    /** Maximum texture image units accessible from vertex and fragment shaders
     * combined */