i965g: re-starting from the dri driver

1 files changed, 179 insertions, 0 deletions

diff --git a/src/gallium/drivers/i965/brw_clip.h b/src/gallium/drivers/i965/brw_clip.h
new file mode 100644
index 00000000000..957df441ab0
--- /dev/null
+++ b/src/gallium/drivers/i965/brw_clip.h
@@ -0,0 +1,179 @@
+/*
+ Copyright (C) Intel Corp.  2006.  All Rights Reserved.
+ Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
+ develop this 3D driver.
+ 
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+ 
+ The above copyright notice and this permission notice (including the
+ next paragraph) shall be included in all copies or substantial
+ portions of the Software.
+ 
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
+ LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ 
+ **********************************************************************/
+ /*
+  * Authors:
+  *   Keith Whitwell <[email protected]>
+  */
+
+#ifndef BRW_CLIP_H
+#define BRW_CLIP_H
+
+
+#include "brw_context.h"
+#include "brw_eu.h"
+
+#define MAX_VERTS (3+6+6)	
+
+/* Note that if unfilled primitives are being emitted, we have to fix
+ * up polygon offset and flatshading at this point:
+ */
+struct brw_clip_prog_key {
+   GLuint attrs:32;		
+   GLuint primitive:4;
+   GLuint nr_userclip:3;
+   GLuint do_flat_shading:1;
+   GLuint do_unfilled:1;
+   GLuint fill_cw:2;		/* includes cull information */
+   GLuint fill_ccw:2;		/* includes cull information */
+   GLuint offset_cw:1;
+   GLuint offset_ccw:1;
+   GLuint pad0:17;
+
+   GLuint copy_bfc_cw:1;
+   GLuint copy_bfc_ccw:1;
+   GLuint clip_mode:3;
+   GLuint pad1:27;
+   
+   GLfloat offset_factor;
+   GLfloat offset_units;
+};
+
+
+#define CLIP_LINE   0
+#define CLIP_POINT  1
+#define CLIP_FILL   2
+#define CLIP_CULL   3
+
+
+#define PRIM_MASK  (0x1f)
+
+struct brw_clip_compile {
+   struct brw_compile func;
+   struct brw_clip_prog_key key;
+   struct brw_clip_prog_data prog_data;
+   
+   struct {
+      struct brw_reg R0;
+      struct brw_reg vertex[MAX_VERTS];
+
+      struct brw_reg t;
+      struct brw_reg t0, t1;
+      struct brw_reg dp0, dp1;
+
+      struct brw_reg dpPrev;
+      struct brw_reg dp;
+      struct brw_reg loopcount;
+      struct brw_reg nr_verts;
+      struct brw_reg planemask;
+
+      struct brw_reg inlist;
+      struct brw_reg outlist;
+      struct brw_reg freelist;
+
+      struct brw_reg dir;
+      struct brw_reg tmp0, tmp1;
+      struct brw_reg offset;
+      
+      struct brw_reg fixed_planes;
+      struct brw_reg plane_equation;
+       
+      struct brw_reg ff_sync;
+   } reg;
+
+   /* 3 different ways of expressing vertex size:
+    */
+   GLuint nr_attrs;
+   GLuint nr_regs;
+   GLuint nr_bytes;
+
+   GLuint first_tmp;
+   GLuint last_tmp;
+
+   GLboolean need_direction;
+
+   GLuint last_mrf;
+
+   GLuint header_position_offset;
+   GLuint offset[VERT_ATTRIB_MAX];
+   GLboolean need_ff_sync;
+};
+
+#define ATTR_SIZE  (4*4)
+
+/* Points are only culled, so no need for a clip routine, however it
+ * works out easier to have a dummy one.
+ */
+void brw_emit_unfilled_clip( struct brw_clip_compile *c );
+void brw_emit_tri_clip( struct brw_clip_compile *c );
+void brw_emit_line_clip( struct brw_clip_compile *c );
+void brw_emit_point_clip( struct brw_clip_compile *c );
+
+/* brw_clip_tri.c, for use by the unfilled clip routine:
+ */
+void brw_clip_tri_init_vertices( struct brw_clip_compile *c );
+void brw_clip_tri_flat_shade( struct brw_clip_compile *c );
+void brw_clip_tri( struct brw_clip_compile *c );
+void brw_clip_tri_emit_polygon( struct brw_clip_compile *c );
+void brw_clip_tri_alloc_regs( struct brw_clip_compile *c, 
+			      GLuint nr_verts );
+
+
+/* Utils:
+ */
+
+void brw_clip_interp_vertex( struct brw_clip_compile *c,
+			     struct brw_indirect dest_ptr,
+			     struct brw_indirect v0_ptr, /* from */
+			     struct brw_indirect v1_ptr, /* to */
+			     struct brw_reg t0,
+			     GLboolean force_edgeflag );
+
+void brw_clip_init_planes( struct brw_clip_compile *c );
+
+void brw_clip_emit_vue(struct brw_clip_compile *c, 
+		       struct brw_indirect vert,
+		       GLboolean allocate,
+		       GLboolean eot,
+		       GLuint header);
+
+void brw_clip_kill_thread(struct brw_clip_compile *c);
+
+struct brw_reg brw_clip_plane_stride( struct brw_clip_compile *c );
+struct brw_reg brw_clip_plane0_address( struct brw_clip_compile *c );
+
+void brw_clip_copy_colors( struct brw_clip_compile *c,
+			   GLuint to, GLuint from );
+
+void brw_clip_init_clipmask( struct brw_clip_compile *c );
+
+struct brw_reg get_tmp( struct brw_clip_compile *c );
+
+void brw_clip_project_position(struct brw_clip_compile *c,
+             struct brw_reg pos );
+void brw_clip_ff_sync(struct brw_clip_compile *c);
+void brw_clip_init_ff_sync(struct brw_clip_compile *c);
+#endif