gallium: implement modern sampling scheme

largely a merge of the previously discussed origin/gallium-resource-sampling
but updated.
the idea is to allow arbitrary binding of resources, the way opencl, new gl
versions and dx10+ require, i.e.
    DCL RES[0], 2D, FLOAT

    LOAD DST[0], SRC[0], RES[0]
    SAMPLE DST[0], SRC[0], RES[0], SAMP[0]

1 files changed, 123 insertions, 0 deletions

diff --git a/src/gallium/docs/source/tgsi.rst b/src/gallium/docs/source/tgsi.rst
index d986e6601e6..49877206fea 100644
--- a/src/gallium/docs/source/tgsi.rst
+++ b/src/gallium/docs/source/tgsi.rst
@@ -1250,6 +1250,110 @@ This opcode is the inverse of :opcode:`DFRACEXP`.
    dst.zw = \sqrt{src.zw}
 
 
+.. _resourceopcodes:
+
+Resource Access Opcodes
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Those opcodes follow very closely semantics of the respective Direct3D
+instructions. If in doubt double check Direct3D documentation.
+
+.. opcode:: LOAD - Simplified alternative to the "SAMPLE" instruction.
+               Using the provided integer address, LOAD fetches data
+               from the specified buffer/texture without any filtering.
+               The source data may come from any resource type other
+               than CUBE.
+               LOAD dst, address, resource
+               e.g.
+               LOAD TEMP[0], TEMP[1], RES[0]
+
+.. opcode:: LOAD_MS - Just like LOAD but allows fetch data from
+               multi-sampled surfaces.
+
+.. opcode:: SAMPLE - Using provided address, sample data from the
+               specified texture using the filtering mode identified
+               by the gven sampler. The source data may come from
+               any resource type other than buffers.
+               SAMPLE dst, address, resource, sampler
+               e.g.
+               SAMPLE TEMP[0], TEMP[1], RES[0], SAMP[0]
+
+.. opcode:: SAMPLE_B - Just like the SAMPLE instruction with the
+               exception that an additiona bias is applied to the
+               level of detail computed as part of the instruction
+               execution.
+               SAMPLE_B dst, address, resource, sampler, lod_bias
+               e.g.
+               SAMPLE_B TEMP[0], TEMP[1], RES[0], SAMP[0], TEMP[2].x
+
+.. opcode:: SAMPLE_C - Similar to the SAMPLE instruction but it 
+               performs a comparison filter. The operands to SAMPLE_C
+               are identical to SAMPLE, except that tere is an additional
+               float32 operand, reference value, which must be a register
+               with single-component, or a scalar literal.
+               SAMPLE_C makes the hardware use the current samplers
+               compare_func (in pipe_sampler_state) to compare
+               reference value against the red component value for the
+               surce resource at each texel that the currently configured
+               texture filter covers based on the provided coordinates.
+               SAMPLE_C dst, address, resource.r, sampler, ref_value
+               e.g.
+               SAMPLE_C TEMP[0], TEMP[1], RES[0].r, SAMP[0], TEMP[2].x
+
+.. opcode:: SAMPLE_C_LZ - Same as SAMPLE_C, but LOD is 0 and derivatives
+               are ignored. The LZ stands for level-zero.
+               SAMPLE_C_LZ dst, address, resource.r, sampler, ref_value
+               e.g.
+               SAMPLE_C_LZ TEMP[0], TEMP[1], RES[0].r, SAMP[0], TEMP[2].x
+
+
+.. opcode:: SAMPLE_D - SAMPLE_D is identical to the SAMPLE opcode except
+               that the derivatives for the source address in the x
+               direction and the y direction are provided by extra
+               parameters.
+               SAMPLE_D dst, address, resource, sampler, der_x, der_y
+               e.g.
+               SAMPLE_D TEMP[0], TEMP[1], RES[0], SAMP[0], TEMP[2], TEMP[3]
+
+.. opcode:: SAMPLE_L - SAMPLE_L is identical to the SAMPLE opcode except
+               that the LOD is provided directly as a scalar value,
+               representing no anisotropy. Source addresses A channel
+               is used as the LOD.
+               SAMPLE_L dst, address, resource, sampler
+               e.g.
+               SAMPLE_L TEMP[0], TEMP[1], RES[0], SAMP[0]
+
+
+.. opcode:: GATHER4 - Gathers the four texels to be used in a bi-linear
+               filtering operation and packs them into a single register.
+               Only woth with 2D, 2D array, cubemaps, and cubemaps arrays.
+               For 2D textures, only the addressing modes of the sampler and
+               the top level of any mip pyramid are used. Set W to zero.
+               It behaves like the SAMPLE instruction, but a filtered
+               sample is not generated. The four samples that contribute
+               to filtering are places into xyzw in cunter-clockwise order,
+               starting with the (u,v) texture coordinate delta at the
+               following locations (-, +), (+, +), (+, -), (-, -), where
+               the magnitude of the deltas are half a texel.
+
+
+.. opcode:: RESINFO - query the dimentions of a given input buffer.
+               dst receives width, height, depth or array size and
+               total mip count (also can be slected by writemask).
+               RESINFO dst, src_mip_level, resource
+               e.g.
+               RESINFO TEMP[0], TEMP[1].x, RES[0]
+
+.. opcode:: SAMPLE_POS - query the position of a given sample.
+               dst receives float4 (x, y, 0, 0) indicated where the
+               sample is located. If the resource is not a multi-sample
+               resource and not a render target, the result is 0.
+
+.. opcode:: SAMPLE_INFO - dst receives number of components in x.
+               If the resource is not a multi-sample resource and 
+               not a render target, the result is 0.
+
+
 Explanation of symbols used
 ------------------------------
 
@@ -1332,6 +1436,8 @@ wrapping when interpolating by the rasteriser. If TGSI_CYLINDRICAL_WRAP_X
 is set to 1, the X component should be interpolated according to cylindrical
 wrapping rules.
 
+If file is TGSI_FILE_RESOURCE, a Declaration Resource token follows.
+
 
 Declaration Semantic
 ^^^^^^^^^^^^^^^^^^^^^^^^
@@ -1475,6 +1581,23 @@ is a writable stencil reference value. Only the Y component is writable.
 This allows the fragment shader to change the fragments stencilref value.
 
 
+Declaration Resource
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+   Follows Declaration token if file is TGSI_FILE_RESOURCE.
+
+   DCL RES[#], resource, type(s)
+
+   Declares a shader input resource and assigns it to a RES[#]
+   register.
+
+   resource can be one of BUFFER, 1D, 2D, 3D, CUBE, 1DArray and
+   2DArray.
+
+   type must be 1 or 4 entries (if specifying on a per-component
+   level) out of UNORM, SNORM, SINT, UINT and FLOAT.
+
+
 Properties
 ^^^^^^^^^^^^^^^^^^^^^^^^