r300g: merge VS output mapping state (VAP) to rasterizer block state (RS)

These two should be tied together because what's set in VAP or stuffed in GA
should be rasterized in RS. Not doing so causes a hardlock.

The reason for the merge is that if stuffed texture coordinates (e.g. point
sprite texgen) happen to occupy the texcoord slot dedicated to fog or wpos,
the two must be relocated to other free slots, which needs remapping the vertex
shader outputs.

The rasterizer code is now literally a sequence read-rasterize-write.

8 files changed, 96 insertions, 207 deletions

diff --git a/src/gallium/drivers/r300/r300_context.c b/src/gallium/drivers/r300/r300_context.c
index 4f721ebb599..e84bce0010f 100644
--- a/src/gallium/drivers/r300/r300_context.c
+++ b/src/gallium/drivers/r300/r300_context.c
@@ -76,7 +76,6 @@ static void r300_destroy_context(struct pipe_context* context)
     FREE(r300->rs_block_state.state);
     FREE(r300->scissor_state.state);
     FREE(r300->textures_state.state);
-    FREE(r300->vap_output_state.state);
     FREE(r300->viewport_state.state);
     FREE(r300->ztop_state.state);
     FREE(r300->fs_constants.state);
@@ -125,7 +124,6 @@ static void r300_setup_atoms(struct r300_context* r300)
     R300_INIT_ATOM(viewport_state, 9);
     R300_INIT_ATOM(rs_block_state, 0);
     R300_INIT_ATOM(vertex_stream_state, 0);
-    R300_INIT_ATOM(vap_output_state, 6);
     R300_INIT_ATOM(pvs_flush, 2);
     R300_INIT_ATOM(vs_state, 0);
     R300_INIT_ATOM(vs_constants, 0);
@@ -149,7 +147,6 @@ static void r300_setup_atoms(struct r300_context* r300)
     r300->rs_block_state.state = CALLOC_STRUCT(r300_rs_block);
     r300->scissor_state.state = CALLOC_STRUCT(pipe_scissor_state);
     r300->textures_state.state = CALLOC_STRUCT(r300_textures_state);
-    r300->vap_output_state.state = CALLOC_STRUCT(r300_vap_output_state);
     r300->viewport_state.state = CALLOC_STRUCT(r300_viewport_state);
     r300->ztop_state.state = CALLOC_STRUCT(r300_ztop_state);
     r300->fs_constants.state = CALLOC_STRUCT(r300_constant_buffer);
diff --git a/src/gallium/drivers/r300/r300_context.h b/src/gallium/drivers/r300/r300_context.h
index a05bf3ce099..e9c8fcdc157 100644
--- a/src/gallium/drivers/r300/r300_context.h
+++ b/src/gallium/drivers/r300/r300_context.h
@@ -119,6 +119,10 @@ struct r300_rs_state {
 };
 
 struct r300_rs_block {
+    uint32_t vap_vtx_state_cntl;  /* R300_VAP_VTX_STATE_CNTL: 0x2180 */
+    uint32_t vap_vsm_vtx_assm;    /* R300_VAP_VSM_VTX_ASSM: 0x2184 */
+    uint32_t vap_out_vtx_fmt[2];  /* R300_VAP_OUTPUT_VTX_FMT_[0-1]: 0x2090 */
+
     uint32_t ip[8]; /* R300_RS_IP_[0-7], R500_RS_IP_[0-7] */
     uint32_t count; /* R300_RS_COUNT */
     uint32_t inst_count; /* R300_RS_INST_COUNT */
@@ -190,12 +194,6 @@ struct r300_vertex_stream_state {
     unsigned count;
 };
 
-struct r300_vap_output_state {
-    uint32_t vap_vtx_state_cntl;  /* R300_VAP_VTX_STATE_CNTL: 0x2180 */
-    uint32_t vap_vsm_vtx_assm;    /* R300_VAP_VSM_VTX_ASSM: 0x2184 */
-    uint32_t vap_out_vtx_fmt[2];  /* R300_VAP_OUTPUT_VTX_FMT_[0-1]: 0x2090 */
-};
-
 struct r300_viewport_state {
     float xscale;         /* R300_VAP_VPORT_XSCALE:  0x2098 */
     float xoffset;        /* R300_VAP_VPORT_XOFFSET: 0x209c */
@@ -381,7 +379,7 @@ struct r300_context {
     struct r300_atom query_start;
     /* Rasterizer state. */
     struct r300_atom rs_state;
-    /* RS block state. */
+    /* RS block state + VAP (vertex shader) output mapping state. */
     struct r300_atom rs_block_state;
     /* Scissor state. */
     struct r300_atom scissor_state;
@@ -389,8 +387,6 @@ struct r300_context {
     struct r300_atom textures_state;
     /* Vertex stream formatting state. */
     struct r300_atom vertex_stream_state;
-    /* VAP (vertex shader) output mapping state. */
-    struct r300_atom vap_output_state;
     /* Vertex shader. */
     struct r300_atom vs_state;
     /* Vertex shader constant buffer. */
@@ -424,6 +420,9 @@ struct r300_context {
 
     struct pipe_viewport_state viewport;
 
+    /* Stream locations for SWTCL. */
+    int stream_loc_notcl[16];
+
     /* Flag indicating whether or not the HW is dirty. */
     uint32_t dirty_hw;
     /* Whether polygon offset is enabled. */
diff --git a/src/gallium/drivers/r300/r300_emit.c b/src/gallium/drivers/r300/r300_emit.c
index 92b7517b8d6..23bbc6a99c8 100644
--- a/src/gallium/drivers/r300/r300_emit.c
+++ b/src/gallium/drivers/r300/r300_emit.c
@@ -717,6 +717,13 @@ void r300_emit_rs_block_state(struct r300_context* r300,
     DBG(r300, DBG_DRAW, "r300: RS emit:\n");
 
     BEGIN_CS(size);
+    OUT_CS_REG_SEQ(R300_VAP_VTX_STATE_CNTL, 2);
+    OUT_CS(rs->vap_vtx_state_cntl);
+    OUT_CS(rs->vap_vsm_vtx_assm);
+    OUT_CS_REG_SEQ(R300_VAP_OUTPUT_VTX_FMT_0, 2);
+    OUT_CS(rs->vap_out_vtx_fmt[0]);
+    OUT_CS(rs->vap_out_vtx_fmt[1]);
+
     if (r300->screen->caps.is_r500) {
         OUT_CS_REG_SEQ(R500_RS_IP_0, count);
     } else {
@@ -901,25 +908,6 @@ void r300_emit_vertex_stream_state(struct r300_context* r300,
     END_CS;
 }
 
-void r300_emit_vap_output_state(struct r300_context* r300,
-                               unsigned size, void* state)
-{
-    struct r300_vap_output_state *vap_out_state =
-        (struct r300_vap_output_state*)state;
-    CS_LOCALS(r300);
-
-    DBG(r300, DBG_DRAW, "r300: VAP emit:\n");
-
-    BEGIN_CS(size);
-    OUT_CS_REG_SEQ(R300_VAP_VTX_STATE_CNTL, 2);
-    OUT_CS(vap_out_state->vap_vtx_state_cntl);
-    OUT_CS(vap_out_state->vap_vsm_vtx_assm);
-    OUT_CS_REG_SEQ(R300_VAP_OUTPUT_VTX_FMT_0, 2);
-    OUT_CS(vap_out_state->vap_out_vtx_fmt[0]);
-    OUT_CS(vap_out_state->vap_out_vtx_fmt[1]);
-    END_CS;
-}
-
 void r300_emit_pvs_flush(struct r300_context* r300, unsigned size, void* state)
 {
     CS_LOCALS(r300);
diff --git a/src/gallium/drivers/r300/r300_emit.h b/src/gallium/drivers/r300/r300_emit.h
index c3eb195d4e7..3c0edf6fdca 100644
--- a/src/gallium/drivers/r300/r300_emit.h
+++ b/src/gallium/drivers/r300/r300_emit.h
@@ -81,9 +81,6 @@ void r300_emit_vertex_buffer(struct r300_context* r300);
 void r300_emit_vertex_stream_state(struct r300_context* r300,
                                    unsigned size, void* state);
 
-void r300_emit_vap_output_state(struct r300_context* r300,
-                               unsigned size, void* state);
-
 void r300_emit_vs_constants(struct r300_context* r300,
                             unsigned size, void *state);
 
diff --git a/src/gallium/drivers/r300/r300_state.c b/src/gallium/drivers/r300/r300_state.c
index e3372458f32..6a73f388fca 100644
--- a/src/gallium/drivers/r300/r300_state.c
+++ b/src/gallium/drivers/r300/r300_state.c
@@ -686,10 +686,6 @@ static void r300_bind_fs_state(struct pipe_context* pipe, void* shader)
     r300_mark_fs_code_dirty(r300);
 
     r300->rs_block_state.dirty = TRUE; /* Will be updated before the emission. */
-
-    if (r300->vs_state.state && r300_vertex_shader_setup_wpos(r300)) {
-        r300->vap_output_state.dirty = TRUE;
-    }
 }
 
 /* Delete fragment shader state. */
@@ -1395,14 +1391,6 @@ static void r300_bind_vs_state(struct pipe_context* pipe, void* shader)
     }
     r300->vs_state.state = vs;
 
-    // VS output mapping for HWTCL or stream mapping for SWTCL to the RS block
-    if (r300->fs.state) {
-        r300_vertex_shader_setup_wpos(r300);
-    }
-    memcpy(r300->vap_output_state.state, &vs->vap_out,
-           sizeof(struct r300_vap_output_state));
-    r300->vap_output_state.dirty = TRUE;
-
     /* The majority of the RS block bits is dependent on the vertex shader. */
     r300->rs_block_state.dirty = TRUE; /* Will be updated before the emission. */
 
diff --git a/src/gallium/drivers/r300/r300_state_derived.c b/src/gallium/drivers/r300/r300_state_derived.c
index 43e3d1d701d..e3adace0faa 100644
--- a/src/gallium/drivers/r300/r300_state_derived.c
+++ b/src/gallium/drivers/r300/r300_state_derived.c
@@ -115,12 +115,11 @@ static void r300_draw_emit_all_attribs(struct r300_context* r300)
 static void r300_swtcl_vertex_psc(struct r300_context *r300)
 {
     struct r300_vertex_stream_state *vstream = r300->vertex_stream_state.state;
-    struct r300_vertex_shader* vs = r300->vs_state.state;
-    struct vertex_info* vinfo = &r300->vertex_info;
+        struct vertex_info* vinfo = &r300->vertex_info;
     uint16_t type, swizzle;
     enum pipe_format format;
     unsigned i, attrib_count;
-    int* vs_output_tab = vs->stream_loc_notcl;
+    int* vs_output_tab = r300->stream_loc_notcl;
 
     /* XXX hax */
     memset(vstream, 0, sizeof(struct r300_vertex_stream_state));
@@ -269,22 +268,29 @@ static void r500_rs_tex_write(struct r300_rs_block* rs, int id, int fp_offset)
 
 /* Set up the RS block.
  *
- * This is the part of the chipset that actually does the rasterization
- * of vertices into fragments. This is also the part of the chipset that
- * locks up if any part of it is even slightly wrong. */
+ * This is the part of the chipset that is responsible for linking vertex
+ * and fragment shaders and stuffed texture coordinates.
+ *
+ * The rasterizer reads data from VAP, which produces vertex shader outputs,
+ * and GA, which produces stuffed texture coordinates. VAP outputs have
+ * precedence over GA. All outputs must be rasterized otherwise it locks up.
+ * If there are more outputs rasterized than is set in VAP/GA, it locks up
+ * too. The funky part is that this info has been pretty much obtained by trial
+ * and error. */
 static void r300_update_rs_block(struct r300_context *r300)
 {
     struct r300_vertex_shader *vs = r300->vs_state.state;
     struct r300_shader_semantics *vs_outputs = &vs->outputs;
     struct r300_shader_semantics *fs_inputs = &r300_fs(r300)->shader->inputs;
-    struct r300_rs_block rs = { { 0 } };
-    int i, col_count = 0, tex_count = 0, fp_offset = 0, count;
+    struct r300_rs_block rs = {0};
+    int i, col_count = 0, tex_count = 0, fp_offset = 0, count, loc = 0;
     void (*rX00_rs_col)(struct r300_rs_block*, int, int, enum r300_rs_swizzle);
     void (*rX00_rs_col_write)(struct r300_rs_block*, int, int);
     void (*rX00_rs_tex)(struct r300_rs_block*, int, int, enum r300_rs_swizzle);
     void (*rX00_rs_tex_write)(struct r300_rs_block*, int, int);
     boolean any_bcolor_used = vs_outputs->bcolor[0] != ATTR_UNUSED ||
                               vs_outputs->bcolor[1] != ATTR_UNUSED;
+    int *stream_loc_notcl = r300->stream_loc_notcl;
 
     if (r300->screen->caps.is_r500) {
         rX00_rs_col       = r500_rs_col;
@@ -298,15 +304,31 @@ static void r300_update_rs_block(struct r300_context *r300)
         rX00_rs_tex_write = r300_rs_tex_write;
     }
 
-    /* Rasterize colors. */
+    /* The position is always present in VAP. */
+    rs.vap_vsm_vtx_assm |= R300_INPUT_CNTL_POS;
+    rs.vap_out_vtx_fmt[0] |= R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT;
+    stream_loc_notcl[loc++] = 0;
+
+    /* Set up the point size in VAP. */
+    if (vs_outputs->psize != ATTR_UNUSED) {
+        rs.vap_out_vtx_fmt[0] |= R300_VAP_OUTPUT_VTX_FMT_0__PT_SIZE_PRESENT;
+        stream_loc_notcl[loc++] = 1;
+    }
+
+    /* Set up and rasterize colors. */
     for (i = 0; i < ATTR_COLOR_COUNT; i++) {
         if (vs_outputs->color[i] != ATTR_UNUSED || any_bcolor_used ||
             vs_outputs->color[1] != ATTR_UNUSED) {
-            /* Always rasterize if it's written by the VS,
-             * otherwise it locks up. */
+            /* Set up the color in VAP. */
+            rs.vap_vsm_vtx_assm |= R300_INPUT_CNTL_COLOR;
+            rs.vap_out_vtx_fmt[0] |=
+                    R300_VAP_OUTPUT_VTX_FMT_0__COLOR_0_PRESENT << i;
+            stream_loc_notcl[loc++] = 2 + i;
+
+            /* Rasterize it. */
             rX00_rs_col(&rs, col_count, col_count, SWIZ_XYZW);
 
-            /* Write it to the FS input register if it's used by the FS. */
+            /* Write it to the FS input register if it's needed by the FS. */
             if (fs_inputs->color[i] != ATTR_UNUSED) {
                 rX00_rs_col_write(&rs, col_count, fp_offset);
                 fp_offset++;
@@ -329,17 +351,33 @@ static void r300_update_rs_block(struct r300_context *r300)
         }
     }
 
+    /* Set up back-face colors. The rasterizer will do the color selection
+     * automatically. */
+    if (any_bcolor_used) {
+        for (i = 0; i < ATTR_COLOR_COUNT; i++) {
+            rs.vap_vsm_vtx_assm |= R300_INPUT_CNTL_COLOR;
+            rs.vap_out_vtx_fmt[0] |= R300_VAP_OUTPUT_VTX_FMT_0__COLOR_0_PRESENT << (2+i);
+            stream_loc_notcl[loc++] = 4 + i;
+        }
+    }
+
     /* Rasterize texture coordinates. */
-    for (i = 0; i < ATTR_GENERIC_COUNT; i++) {
+    for (i = 0; i < ATTR_GENERIC_COUNT && tex_count < 8; i++) {
 	bool sprite_coord = !!(r300->sprite_coord_enable & (1 << i));
 
         if (vs_outputs->generic[i] != ATTR_UNUSED || sprite_coord) {
-            /* Always rasterize if it's written by the VS,
-             * otherwise it locks up. */
+            if (!sprite_coord) {
+                /* Set up the texture coordinates in VAP. */
+                rs.vap_vsm_vtx_assm |= (R300_INPUT_CNTL_TC0 << tex_count);
+                rs.vap_out_vtx_fmt[1] |= (4 << (3 * tex_count));
+                stream_loc_notcl[loc++] = 6 + tex_count;
+            }
+
+            /* Rasterize it. */
             rX00_rs_tex(&rs, tex_count, tex_count,
 			sprite_coord ? SWIZ_XY01 : SWIZ_XYZW);
 
-            /* Write it to the FS input register if it's used by the FS. */
+            /* Write it to the FS input register if it's needed by the FS. */
             if (fs_inputs->generic[i] != ATTR_UNUSED) {
                 rX00_rs_tex_write(&rs, tex_count, fp_offset);
                 fp_offset++;
@@ -366,12 +404,16 @@ static void r300_update_rs_block(struct r300_context *r300)
     }
 
     /* Rasterize fog coordinates. */
-    if (vs_outputs->fog != ATTR_UNUSED) {
-        /* Always rasterize if it's written by the VS,
-         * otherwise it locks up. */
+    if (vs_outputs->fog != ATTR_UNUSED && tex_count < 8) {
+        /* Set up the fog coordinates in VAP. */
+        rs.vap_vsm_vtx_assm |= (R300_INPUT_CNTL_TC0 << tex_count);
+        rs.vap_out_vtx_fmt[1] |= (4 << (3 * tex_count));
+        stream_loc_notcl[loc++] = 6 + tex_count;
+
+        /* Rasterize it. */
         rX00_rs_tex(&rs, tex_count, tex_count, SWIZ_X001);
 
-        /* Write it to the FS input register if it's used by the FS. */
+        /* Write it to the FS input register if it's needed by the FS. */
         if (fs_inputs->fog != ATTR_UNUSED) {
             rX00_rs_tex_write(&rs, tex_count, fp_offset);
             fp_offset++;
@@ -392,9 +434,17 @@ static void r300_update_rs_block(struct r300_context *r300)
     }
 
     /* Rasterize WPOS. */
-    /* If the FS doesn't need it, it's not written by the VS. */
-    if (vs_outputs->wpos != ATTR_UNUSED && fs_inputs->wpos != ATTR_UNUSED) {
+    /* Don't set it in VAP if the FS doesn't need it. */
+    if (fs_inputs->wpos != ATTR_UNUSED && tex_count < 8) {
+        /* Set up the WPOS coordinates in VAP. */
+        rs.vap_vsm_vtx_assm |= (R300_INPUT_CNTL_TC0 << tex_count);
+        rs.vap_out_vtx_fmt[1] |= (4 << (3 * tex_count));
+        stream_loc_notcl[loc++] = 6 + tex_count;
+
+        /* Rasterize it. */
         rX00_rs_tex(&rs, tex_count, tex_count, SWIZ_XYZW);
+
+        /* Write it to the FS input register. */
         rX00_rs_tex_write(&rs, tex_count, fp_offset);
 
         DBG(r300, DBG_RS, "r300: Rasterized WPOS written to FS.\n");
@@ -403,6 +453,11 @@ static void r300_update_rs_block(struct r300_context *r300)
         tex_count++;
     }
 
+    /* Invalidate the rest of the no-TCL (GA) stream locations. */
+    for (; loc < 16;) {
+        stream_loc_notcl[loc++] = -1;
+    }
+
     /* Rasterize at least one color, or bad things happen. */
     if (col_count == 0 && tex_count == 0) {
         rX00_rs_col(&rs, 0, 0, SWIZ_0001);
@@ -423,7 +478,7 @@ static void r300_update_rs_block(struct r300_context *r300)
     /* Now, after all that, see if we actually need to update the state. */
     if (memcmp(r300->rs_block_state.state, &rs, sizeof(struct r300_rs_block))) {
         memcpy(r300->rs_block_state.state, &rs, sizeof(struct r300_rs_block));
-        r300->rs_block_state.size = 5 + count*2;
+        r300->rs_block_state.size = 11 + count*2;
     }
 }
 
diff --git a/src/gallium/drivers/r300/r300_vs.c b/src/gallium/drivers/r300/r300_vs.c
index bfab9c3b014..b7609bad811 100644
--- a/src/gallium/drivers/r300/r300_vs.c
+++ b/src/gallium/drivers/r300/r300_vs.c
@@ -94,94 +94,6 @@ static void r300_shader_read_vs_outputs(
     vs_outputs->wpos = i;
 }
 
-/* This function sets up:
- * - VAP mapping, which maps VS registers to output semantics and
- *   at the same time it indicates which attributes are enabled and should
- *   be rasterized.
- * - Stream mapping to VS outputs if TCL is not present. */
-static void r300_init_vs_output_mapping(struct r300_vertex_shader* vs)
-{
-    struct r300_shader_semantics* vs_outputs = &vs->outputs;
-    struct r300_vap_output_state *vap_out = &vs->vap_out;
-    int *stream_loc = vs->stream_loc_notcl;
-    int i, gen_count, tabi = 0;
-    boolean any_bcolor_used = vs_outputs->bcolor[0] != ATTR_UNUSED ||
-                              vs_outputs->bcolor[1] != ATTR_UNUSED;
-
-    vap_out->vap_vtx_state_cntl = 0x5555; /* XXX this is classic Mesa bonghits */
-
-    /* Position. */
-    if (vs_outputs->pos != ATTR_UNUSED) {
-        vap_out->vap_vsm_vtx_assm |= R300_INPUT_CNTL_POS;
-        vap_out->vap_out_vtx_fmt[0] |= R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT;
-
-        stream_loc[tabi++] = 0;
-    } else {
-        assert(0);
-    }
-
-    /* Point size. */
-    if (vs_outputs->psize != ATTR_UNUSED) {
-        vap_out->vap_out_vtx_fmt[0] |= R300_VAP_OUTPUT_VTX_FMT_0__PT_SIZE_PRESENT;
-
-        stream_loc[tabi++] = 1;
-    }
-
-    /* Colors. */
-    for (i = 0; i < ATTR_COLOR_COUNT; i++) {
-        if (vs_outputs->color[i] != ATTR_UNUSED || any_bcolor_used ||
-            vs_outputs->color[1] != ATTR_UNUSED) {
-            vap_out->vap_vsm_vtx_assm |= R300_INPUT_CNTL_COLOR;
-            vap_out->vap_out_vtx_fmt[0] |= R300_VAP_OUTPUT_VTX_FMT_0__COLOR_0_PRESENT << i;
-
-            stream_loc[tabi++] = 2 + i;
-        }
-    }
-
-    /* Back-face colors. */
-    if (any_bcolor_used) {
-        for (i = 0; i < ATTR_COLOR_COUNT; i++) {
-            vap_out->vap_vsm_vtx_assm |= R300_INPUT_CNTL_COLOR;
-            vap_out->vap_out_vtx_fmt[0] |= R300_VAP_OUTPUT_VTX_FMT_0__COLOR_0_PRESENT << (2+i);
-
-            stream_loc[tabi++] = 4 + i;
-        }
-    }
-
-    /* Texture coordinates. */
-    gen_count = 0;
-    for (i = 0; i < ATTR_GENERIC_COUNT && gen_count < 8; i++) {
-        if (vs_outputs->generic[i] != ATTR_UNUSED) {
-            vap_out->vap_vsm_vtx_assm |= (R300_INPUT_CNTL_TC0 << gen_count);
-            vap_out->vap_out_vtx_fmt[1] |= (4 << (3 * gen_count));
-
-            stream_loc[tabi++] = 6 + gen_count;
-            gen_count++;
-        }
-    }
-
-    /* Fog coordinates. */
-    if (gen_count < 8 && vs_outputs->fog != ATTR_UNUSED) {
-        vap_out->vap_vsm_vtx_assm |= (R300_INPUT_CNTL_TC0 << gen_count);
-        vap_out->vap_out_vtx_fmt[1] |= (4 << (3 * gen_count));
-
-        stream_loc[tabi++] = 6 + gen_count;
-        gen_count++;
-    }
-
-    /* WPOS. */
-    if (gen_count < 8) {
-        vs->wpos_tex_output = gen_count;
-        stream_loc[tabi++] = 6 + gen_count;
-    } else {
-        vs_outputs->wpos = ATTR_UNUSED;
-    }
-
-    for (; tabi < 16;) {
-        stream_loc[tabi++] = -1;
-    }
-}
-
 static void set_vertex_inputs_outputs(struct r300_vertex_program_compiler * c)
 {
     struct r300_vertex_shader * vs = c->UserData;
@@ -246,9 +158,7 @@ static void set_vertex_inputs_outputs(struct r300_vertex_program_compiler * c)
     }
 
     /* WPOS. */
-    if (outputs->wpos != ATTR_UNUSED) {
-        c->code->outputs[outputs->wpos] = reg++;
-    }
+    c->code->outputs[outputs->wpos] = reg++;
 }
 
 static void r300_dummy_vertex_shader(
@@ -286,7 +196,6 @@ void r300_translate_vertex_shader(struct r300_context* r300,
 
     tgsi_scan_shader(tokens, &vs->info);
     r300_shader_read_vs_outputs(&vs->info, &vs->outputs);
-    r300_init_vs_output_mapping(vs);
 
     /* Setup the compiler */
     rc_init(&compiler.Base);
@@ -307,16 +216,11 @@ void r300_translate_vertex_shader(struct r300_context* r300,
 
     r300_tgsi_to_rc(&ttr, tokens);
 
-    compiler.RequiredOutputs =
-        ~(~0 << (vs->info.num_outputs +
-                 (vs->outputs.wpos != ATTR_UNUSED ? 1 : 0)));
-
+    compiler.RequiredOutputs = ~(~0 << (vs->info.num_outputs + 1));
     compiler.SetHwInputOutput = &set_vertex_inputs_outputs;
 
     /* Insert the WPOS output. */
-    if (vs->outputs.wpos != ATTR_UNUSED) {
-        rc_copy_output(&compiler.Base, 0, vs->outputs.wpos);
-    }
+    rc_copy_output(&compiler.Base, 0, vs->outputs.wpos);
 
     /* Invoke the compiler */
     r3xx_compile_vertex_program(&compiler);
@@ -343,32 +247,3 @@ void r300_translate_vertex_shader(struct r300_context* r300,
     /* And, finally... */
     rc_destroy(&compiler.Base);
 }
-
-boolean r300_vertex_shader_setup_wpos(struct r300_context* r300)
-{
-    struct r300_vertex_shader* vs = r300->vs_state.state;
-    struct r300_vap_output_state *vap_out = &vs->vap_out;
-    int tex_output = vs->wpos_tex_output;
-    uint32_t tex_fmt = R300_INPUT_CNTL_TC0 << tex_output;
-
-    if (vs->outputs.wpos == ATTR_UNUSED) {
-        return FALSE;
-    }
-
-    if (r300_fs(r300)->shader->inputs.wpos != ATTR_UNUSED) {
-        /* Enable WPOS in VAP. */
-        if (!(vap_out->vap_vsm_vtx_assm & tex_fmt)) {
-            vap_out->vap_vsm_vtx_assm |= tex_fmt;
-            vap_out->vap_out_vtx_fmt[1] |= (4 << (3 * tex_output));
-            return TRUE;
-        }
-    } else {
-        /* Disable WPOS in VAP. */
-        if (vap_out->vap_vsm_vtx_assm & tex_fmt) {
-            vap_out->vap_vsm_vtx_assm &= ~tex_fmt;
-            vap_out->vap_out_vtx_fmt[1] &= ~(4 << (3 * tex_output));
-            return TRUE;
-        }
-    }
-    return FALSE;
-}
diff --git a/src/gallium/drivers/r300/r300_vs.h b/src/gallium/drivers/r300/r300_vs.h
index 56bcc3b70b8..57b3fbca0bb 100644
--- a/src/gallium/drivers/r300/r300_vs.h
+++ b/src/gallium/drivers/r300/r300_vs.h
@@ -39,7 +39,6 @@ struct r300_vertex_shader {
 
     struct tgsi_shader_info info;
     struct r300_shader_semantics outputs;
-    struct r300_vap_output_state vap_out;
 
     /* Whether the shader was replaced by a dummy one due to a shader
      * compilation failure. */
@@ -49,12 +48,6 @@ struct r300_vertex_shader {
     unsigned externals_count;
     unsigned immediates_count;
 
-    /* Stream locations for SWTCL or if TCL is bypassed. */
-    int stream_loc_notcl[16];
-
-    /* Output stream location for WPOS. */
-    int wpos_tex_output;
-
     /* HWTCL-specific.  */
     /* Machine code (if translated) */
     struct r300_vertex_program_code code;
@@ -67,7 +60,4 @@ void r300_translate_vertex_shader(struct r300_context* r300,
                                   struct r300_vertex_shader* vs,
                                   const struct tgsi_token *tokens);
 
-/* Return TRUE if VAP (hwfmt) needs to be re-emitted. */
-boolean r300_vertex_shader_setup_wpos(struct r300_context* r300);
-
 #endif /* R300_VS_H */