text/microsoft-resx 2.0 System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 The full list of encoder parameters: {0} Reduce decoder CPU usage. Set this if your device is struggling to play the output. (i.e. dropped frames) Warning: RF 0 is Lossless! A value of 0 means lossless and will result in a file size that is larger than the original source, unless the source was also lossless. x264 and x265's scale is logarithmic and lower values correspond to higher quality. So small increases in value will result in progressively larger increases in the resulting file size. You can optionally store a picture settings with this preset. There are 3 modes: None: Picture settings are not stored in the preset. When loading a source, they will remain as-is within the bounds of the source resolution. This also affects Anamorphic, modulus, cropping etc. Custom: You can optionally set a Maximum width and Height. When doing this an encode will be less than or equal to these values. Keep Aspect Ratio will be automatically turned on. Source Maximum: Always encode at the sources resolution where possible. Copyright (C) 2003-2019 The HandBrake Team This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. WARNING: You do not have automatic file naming turned on. Please enable this in options. WARNING: You do not currently have automatic audio and subtitle track selection setup. You can setup the default track selection behaviour in options. The Built-in presets have been reset. Reset Complete Higher Quality | | Lower Quality Placebo Quality | Error Warning: If you wish to have subtitles added to each item you are about to queue, please verify that you have the subtitle defaults setup correctly on the subtitles tab. Do you wish to continue? You must turn on automatic file naming AND set a default path in preferences before you can add to the queue. Warning Are you sure? HandBrake HandBrake is already encoding. There are jobs on the queue with the same destination path. Please choose a different path for this job. Pending Jobs {0} New Default Preset Set: {0} A New Update is Available. Goto Tools Menu > Options to Install No Preset selected. You can not modify built in presets. Please select one of your own presets. Please select a folder. Preparing to encode ... You can not import a preset with the same name as a built-in preset. The preset "{0}" already exists. Would you like to overwrite it? Presets Are you sure you wish to update the selected preset? The Preset has now been updated with your current settings. HandBrake has determined your built-in presets are out of date... These presets will now be updated. Your custom presets have not been updated so you may have to re-create these by deleting and re-adding them. The previous user_presets.xml file was backed up. Queue Finished Scan Cancelled. Scan Completed Scan failed: Scan Failed... Please See Activity Log for details. Scanning source, please wait... Scanning Title {0} of {1} ({2}%) You must first scan a source and setup your job before starting an encode. Click the 'Source' button on the toolbar to continue. Please make sure you have selected one of your own presets. Please note that you cannot export built-in presets. Please select a preset to update. Select 'Source' to continue {0} Encodes Pending Notice Overwrite? Question Ready Updated Preset Version The preset you are trying to import is from a different version of HandBrake. It may not be possible to import all the values from this preset. Do you wish to proceed? Unable to import preset! Unable to import the preset as it appears to be corrupted or from an older version of HandBrake. You must first set the destination path for the output file before adding to the queue. The entered destination path contained illegal characters and will not be updated. Preview {0} Preview (Scaled) Output: {0} The format of the output file. In addition to any supported file system character, you can use the following placeholders that will be replaced when you change title or scan a source. Live Update Options: {source} {title} {chapters} Non-Live Options: {date} {time} {creation-date} {creation-time} {quality} {bitrate} (These only change if you scan a new source, change title or chapters) Available additional Options: {source_path} or {source_folder_name} Not both at the same time! You cannot encode to a file with the same path and filename as the source file. Please update the destination filename so that it does not match the source file. Your system prevented HandBrake from launching a web browser. You can still access the help pages by visiting the website directly at: https://handbrake.fr Unable to import the selected preset. The preset may be corrupted or from an older version of HandBrake which is not supported. Presets from older versions must be re-created in the current version. Additional advanced arguments that can be passed to the video encoder. None - Only tracks where the container does not support the format will be burned in. Foreign Audio Track - The Foreign Audio track will be burned in if available. First Track - The first track will be burned in. Foreign Audio Preferred, else First - If the foreign audio track exists, it will be burned in, otherwise the first track will be chosen. WebM Subtitle Compatibility WebM in HandBrake only supports burned subtitles. You should change your subtitle selections. If you continue, your non-burned subtitles will be lost. No valid source or titles found. HandBrake will not be able to encode the selected source as it did not find a valid source with titles to encode. This could be due to one of the following reasons: - The duration of each source title is below the "Minimum Title Duration" threshold option in 'Preferences > Advanced'. - The source file is not a valid video file or is in a format that HandBrake does not support. - The source may be copy protected or include DRM. Please note that HandBrake does not support the removal of copy protections. The Activity log may have further information. Queue{0} Start Encode Start Queue You can not delete the default preset. Please set another preset as default first. Are you sure you want to delete the preset: Encoding: Pass {0} of {1}, {2:00.00}%, FPS: {3:000.0}, Avg FPS: {4:000.0}, Time Remaining: {5}, Elapsed: {6:d\:hh\:mm\:ss} {7} A Preset must have a Name. Please fill out the Preset Name field. A Preset with this name already exists. Would you like to overwrite it? You must first scan a source to use the 'Source Maximum' Option. The Custom Width or Height fields must be filled in for the 'Custom' option. Unable to add preset Unknown Error Audio Defaults Audio Tracks Selection Behavior Switch Back To Tracks Unable to save Chapter Markers file! Chapter marker names will NOT be saved in your encode. The following action '{0}' will occur in {1} seconds. If the problem presists, please try restarting HandBrake. There is no further information available about this error. An Unknown Error has occurred. A New Update is Available! Please check the website for release notes. Your system supports the 64bit version of HandBrake! This offers performance and stability improvements over this 32bit version. Please check the website for release notes. There are no new updates at this time. Update Downloaded Update Service Unavailable. You can try downloading the update from https://handbrake.fr Update Failed. You can try downloading the update from https://handbrake.fr Display Size: {0}x{1}, PAR {2}x{3} Add to Queue No encodes pending There are no jobs currently encoding Queue Are you sure you wish to clear the queue? Confirm {0} jobs pending Queue Paused The Queue has been paused. The currently running job will run to completion and no further jobs will start. Are you sure you want to delete the selected jobs? This encode is currently in progress. If you delete it, the encode will be stopped. Are you sure you wish to proceed? There are no pending jobs. Are you sure you wish to edit this job? It will be removed from the queue and sent to the main window. Queue Ready Queue Not Running Queue Completed Last Queued Job Finished Queue Started Encoding: Pass {0} of {1}, {2:00.00}%, FPS: {3:000.0}, Avg FPS: {4:000.0}, Time Remaining: {5}, Elapsed: {6:d\:hh\:mm\:ss} An Encode is currently running. Exiting HandBrake will stop this encode. Are you sure you wish to exit HandBrake? Picture Preview Unable to delete previous preview file. You may need to restart the application. You must first scan a source and setup your encode before creating a preview. Unable to detect VLC Player. Please make sure VLC is installed and the directory specified in HandBrake's options is correct. (See: "Tools Menu > Preferences > General") Unable to find the preview file. Either the file was deleted or the encode failed. Check the activity log for details. Handbrake is already encoding a video! Only one file can be encoded at any one time. Subtitle Defaults Subtitle Tracks Switch Back To Tracks Selection Behavior Archived File: HandBrake has detected your presets file is from an older version. It will try and load the file anyway. If it fails, it will archive off the old file and create a new one. Unable to load presets. HandBrake was unable to load your presets file. It may have been from an older unsupported version of HandBrake or corrupted. Your old presets file was archived to: with {0} errors or cancellations detected. Low Disk Space Warning, you are running low on disk space. HandBrake will not be able to complete this encode if you run out of space. Line {0} is invalid. Nothing will be imported. Unable to import chapter file All lines in chapters file must have at least 2 columns of data First column in chapters file must only contain a integer number value higher than zero (0) Chapter files of type '{0}' are not currently supported. Unsupported chapter file type Invalid chapter information for source media The number of chapters on the source media and the number of chapters in the input file do not match ({0} vs {1}). Do you still want to import the chapter names? The number of chapters on the source media and the number of chapters in the input file do not match ({0} vs {1}). Do you still want to import the chapter names? Chapter count doesn't match between source and input file The reported duration of the chapters on the source media and the duration of chapters in the input file differ greatly. It is very likely that this chapter file was produced from a different source media. Are you sure you want to import the chapter names? Chapter duration doesn't match between source and input file An error occurred when trying to stop the scan. Please restart HandBrake. HandBrake is unable to upgrade your presets file to a new version format. Your preset file will be archived and new one created. You will need to re-create your own presets. Any settings you changed may need to be reset the next time HandBrake launches. A problem occurred when trying to save your preferences. Warning, your settings have been reset! Your user settings file was corrupted or inaccessible. Settings have been reset to defaults. Unable to load user settings file: {0} Your user settings file appears to be inaccessible or corrupted. You may have to delete the file and let HandBrake generate a new one. The output directory you have chosen either does not exist, or you do not have permissions to write files to it. Create Folder? The folder you are trying to write to does not exist. Would you like HandBrake to create the following folder? {0} Unable to launch destination directory. Please check that you have a valid destination directory. Processing Pass {0} of {1}, (Subtitle Scan) {2:00.00}%, Scan Time Remaining: {3}, Elapsed: {4:d\:hh\:mm\:ss} No Additional Information {0} - ({1}%, Pass {2} of {3}) {1}%, Pass {2} of {3} Remaining Time: {4} Queue Paused. Warning, the drive you are encoding to is low on disk space. Please free up some space and press start to continue. You can also adjust the minimum space level in preferences. Queue Paused Queue Paused Your destination directory is low on diskspace. Please free up some disk space on your destination drive. Alternatively you can change the level at which this alert triggers in Options. Unable to reset job status as it is not in an Error or Completed state Unable to restore queue file. The file may be corrupted or from an older incompatible version of HandBrake HandBrake is already encoding a file. Please stop the current encode. If the problem persists, please restart HandBrake. Encoding: Pass {0} of {1}, {2:00.00}% FPS: {3:000.0}, Avg FPS: {4:000.0} Time Remaining: {5}, Elapsed: {6:d\:hh\:mm\:ss} Preview ({0}% actual size) HandBrake requires a 64bit version of Windows 7 or later to run. HandBrake requires Windows 7 or later to run. Version 0.9.9 (XP) and 0.10.5 (Vista) was the last version to support these versions. Do you wish to proceed trying to add the rest? The file '{0}' already exists! Would you like to overwrite it? The system clipboard is currently unavailable. This may be due to another application monitoring or locking the clipboard for its own use. You will not be able to use the clipboard until it is unlocked. License: Version: -- Add New Category -- Add Preset Category: Description: Name: Dimensions: Choose Behaviors: Allow passthru of: Configure how the Audio Tracks are automatically selected and configured when you select a new title or source video. 'Auto Passthru' Behaviour: Bitrate Codec DRC Gain Hide Mixdown Fallback encoder: Reload Samplerate Show Track Name Track Selection Behaviour: For Additional Tracks: When 'Auto Passthru' is selected as the audio codec. Chapter Markers Chapter Name Chapter Number Create chapter markers Duration Export Import Export Names Import Names Reset Chapter Names Cancel Action Proceed When Done Action Error Details: Custom: Deblock Decomb Deinterlace: Preset: Deinterlace Preset Denoise: Denoise Preset Denoise Tune Detelecine: Filters Flip Grayscale Interlace Detection: Preset: Rotate: Sharpen Sharpen Preset Sharpen Tune Tune: Add Cancel Clear Close Copy to Clipboard Move Left Move Right Save Copy to clipboard Encode Log Open Log Directory ScanLog Activity Log Add All Add Current Add Selection Add to Queue Advanced Align A/V Start Angle: Audio Audio Tracks Browse Chapters Container Destination Duration: Save As: Filters Format: Help iPod 5G Support Meta Data (Modified) Muxing: This may take a while... Options Output Settings Pause Dimensions Rename Preset Preset Options Context Menu Delete Preset Presets Preview Encoding: {0}, {1:00.00}%, Time Remaining: {2}, {3} Range: Reload Remove Reset Built-in Presets Save New Preset Searching for start time Selected Preset: Set Default Preview Queue Source: Open Source Start Encode Start Queue Stop Stop Encode Are you sure you wish to stop this encode? Please choose a source to encode before trying to import a subtitle file. Subtitles Subtitle Tracks Summary - Title: Update Selected Preset Video Web Optimized Manage Preset Meta Data Enable Nvidia NVENC Encoder Enable Intel QuickSync Encoder Enable AMD VCE Encoder The file format entered contained invalid characters. These have been removed. Play a sound when each encode completes Play a sound when the queue completes Show previews on summary tab. Show the encode status in the application title bar. Clear Log files older than 30 days About HandBrake Advanced Advanced Options Arguments: Automatic File Naming Automatically name output files Check for Updates Always clear completed queue items after an encode completes Clear Log History Put a copy of individual encode logs in a specified location: Put a copy of individual encode logs in the same location as the encoded video Current Version Decoding Default Path: Download Update DVD Reading Disable LibDVDNav. (libdvdread will be used instead) Encoding File Format: General Logging Log Verbosity Level: Log Path: Low diskspace warning level (GB): Minimize to system tray (Requires Restart) Minimum DVD and Blu-ray title duration in seconds. Shorter titles will be skipped: MP4 File Extension: On Startup Output Files Path: Path to VLC Player Pause queue if disk space is low before starting a job. Prevent the system from sleeping while encoding Number of picture previews to scan: Priority Level: Enable QuickSync Decoding Also Use QSV Decoding when not using a QuickSync encoder. (i.e. x265) Remove common punctuation Replace underscores with a space Reset to 'Do nothing' when the app is re-launched. Choose Scaler: Scaling Send file to: Show the new experimental queue design. Show Queue in line with the main UI. (Experimental Feature) Change case to Title Case Updates User Interface Version: Video This path is used for the video preview feature only. View Log Directory When Done x264/5 Settings Constant quality fractional granularity: Anamorphic: Automatic Bottom Cropping Custom Display Width: Height: Keep Aspect Ratio Left Modulus: Output PAR: Right Size Source: Top Width: Change the behaviour of the audio track selection for this preset. This will not affect your current settings in the Audio tab. Audio Defaults Custom Export to file Import from file Official Change the behaviour of the subtitle track selection for this preset. This will not affect your current settings in the Subtitle tab. Subtitle Defaults Choose titles: Add to Queue The selected titles will be added using the "{0}" preset. Advanced: Audio: Clear All Clear Completed Clear Queue Clear Selected Delete Dest: Do nothing Encode Time: Edit End Time: Export Queue for CLI Filesize: Hibernate Lock System The log will be available after the encode completes. Log off Open Destination Directory Open Source Directory Options Pause Queue Paused Duration: Picture Settings: Quit HandBrake Retry All Jobs Retry Failed Retry Selected Jobs Retry Shutdown Src: Start Queue Start Time: Statistics Statistics will be available after an encode completes. Subtitles: Summary Suspend Video: When Done: Add All Remaining Selected Languages Add All Remaining Tracks Add New Track Add Track Available Languages: Choose Languages: Chosen Languages: Configure Default Behaviours Reload Choose Disc to Scan Choose File to Scan Choose Folder to Scan Optionally choose a specific title: Then choose the video(s) you'd like to encode: File Folder (Batch Scan) Open this DVD or Bluray Drive Open a folder with one or more files. Recover Queue Files A previous queue archive is available. Open a single video file. Source Selection Duration: Live Preview Select a preview image Use system default video player Add Closed Captions when available Add 'Foreign Audio Scan' Burn-In Behaviour: Import Subtitle Track Selection Behaviour: Add All Remaining Closed Captions Configure how the Subtitle Tracks are automatically selected and configured when you select a new title or source video. Additional Audio Tracks Additional Subtitle Tracks Burned Chapter Markers Deblock Detelecine display Grayscale No Audio Tracks No Chapter Markers No Filters No Source No Subtitle Tracks No Tracks Preview {0} of {1} Rotation storage 2-Pass Encoding Avg Bitrate (kbps): Video Codec: Constant Framerate Constant Quality: Encoder Level: Encoder Preset: Encoder Profile: Encoder Tune: Extra Options: Fast Decode Framerate (FPS): Optimise Video: Peak Framerate Quality Turbo first pass Variable Framerate Video Language: Use System Language About HandBrake Or drop a file or folder here ... Help Preferences Add Track Automatically add Tracks Clear Burn In Default Forced Only _About... _Activity Log _Check for Updates _Exit _Export to file _File _HandBrake Documentation (HTTPS) _Help _Import from file _Preferences _Presets _Queue _Reset Built-In Presets _Set Current as Default S_how Preset Panel _Show Queue _Tools Checking for Updates ... Are you sure you wish to clear the log file directory? Clear Logs Downloading... HandBrake's Log file directory has been cleared! Notice Preparing for Update ... Please select a folder. Click 'Browse' to set the default location Hide Show 'Add All' to Queue 'Add Selection' to Queue Play File Application Toolbar Show 'Add All to Queue' on the toolbar Show 'Add Selection to Queue' on the toolbar Hardware encoding support is currently disabled. Please make sure you are running up-to-date drivers for all graphics adaptors in this system. This will not impact any of the software encoders. Please correct your subtitle settings before continuing. Apply Resume Encode Actions Import Encoding: Pass {0} of {1}, {2:00.00}%, FPS: {3:000.0}, Avg FPS: {4:000.0} Time Remaining: {5}, Elapsed: {6:d\:hh\:mm\:ss} {7} Delete Selected Portable Mode: Unable to create TMP directory. Please check the path is correct and is writable. {0} Portable Mode: Unable to create Storage directory. Please check the path is correct and is writable. {0} Portable Mode: Unable to read portable.ini. There may be an error in this file. Please retry using portable.ini.template as a guide. HandBrake's engine failed to initialise. This is often caused by out of date GPU drivers.\n Please update the GPU drivers for any onboard and discrete graphics your system has. Live Update Options: {source} {title} {chapters} Non-Live Options: {date} {time} {creation-date} {creation-time} {quality} {bitrate} (These only change if you scan a new source, change title or chapters) Available Options: {source_path} {source_folder_name} (Not both at the same time!) Ask to overwrite file Try to automatically rename file Overwrite the file User Interface Behaviour File overwrite behaviour: