diff options
Diffstat (limited to 'libhb/work.c')
| -rw-r--r-- | libhb/work.c | 309 |
1 files changed, 95 insertions, 214 deletions
diff --git a/libhb/work.c b/libhb/work.c index 8f3c1d03c..e45ee7bab 100644 --- a/libhb/work.c +++ b/libhb/work.c @@ -220,7 +220,7 @@ static void do_job( hb_job_t * job, int cpu_count ) { audio = hb_list_item( title->list_audio, i ); hb_log( " + %x, %s", audio->id, audio->lang ); - + /* sense-check the current mixdown options */ /* log the requested mixdown */ @@ -231,227 +231,108 @@ static void do_job( hb_job_t * job, int cpu_count ) } } - if (audio->codec == HB_ACODEC_AC3) - { + /* sense-check the requested mixdown */ - /* sense-check the AC3 mixdown */ - - /* audioCodecSupportsMono and audioCodecSupports6Ch are the same for now, - but this may change in the future, so they are separated for flexibility */ - int audioCodecSupportsMono = (job->acodec == HB_ACODEC_FAAC); - int audioCodecSupports6Ch = (job->acodec == HB_ACODEC_FAAC); - - /* find out what the format of our source AC3 audio is */ - switch (audio->config.a52.ac3flags & A52_CHANNEL_MASK) { - - /* mono sources */ - case A52_MONO: - case A52_CHANNEL1: - case A52_CHANNEL2: - /* regardless of what stereo mixdown we've requested, a mono source always get mixed down - to mono if we can, and mixed up to stereo if we can't */ - if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecSupportsMono == 1) { - job->audio_mixdowns[i] = HB_AMIXDOWN_MONO; - } else { - job->audio_mixdowns[i] = HB_AMIXDOWN_STEREO; - } - break; - - /* stereo input */ - case A52_CHANNEL: - case A52_STEREO: - /* if we've requested a mono mixdown, and it is supported, then do the mix */ - /* use stereo if not supported */ - if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecSupportsMono == 0) { - job->audio_mixdowns[i] = HB_AMIXDOWN_STEREO; - /* otherwise, preserve stereo regardless of if we requested something higher */ - } else if (job->audio_mixdowns[i] > HB_AMIXDOWN_STEREO) { - job->audio_mixdowns[i] = HB_AMIXDOWN_STEREO; - } - break; - - /* dolby (DPL1 aka Dolby Surround = 4.0 matrix-encoded) input */ - /* the A52 flags don't allow for a way to distinguish between DPL1 and DPL2 on a DVD, - so we always assume a DPL1 source for A52_DOLBY */ - case A52_DOLBY: - /* if we've requested a mono mixdown, and it is supported, then do the mix */ - /* preserve dolby if not supported */ - if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecSupportsMono == 0) { - job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBY; - /* otherwise, preserve dolby even if we requested something higher */ - /* a stereo mixdown will still be honoured here */ - } else if (job->audio_mixdowns[i] > HB_AMIXDOWN_DOLBY) { - job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBY; - } - break; - - /* 3F/2R input */ - case A52_3F2R: - /* if we've requested a mono mixdown, and it is supported, then do the mix */ - /* use dpl2 if not supported */ - if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecSupportsMono == 0) { - job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBYPLII; - } else { - /* check if we have 3F2R input and also have an LFE - i.e. we have a 5.1 source) */ - if (audio->config.a52.ac3flags & A52_LFE) { - /* we have a 5.1 source */ - /* if we requested 6ch, but our audio format doesn't support it, then mix to DPLII instead */ - if (job->audio_mixdowns[i] == HB_AMIXDOWN_6CH && audioCodecSupports6Ch == 0) { - job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBYPLII; - } - } else { - /* we have a 5.0 source, so we can't do 6ch conversion - default to DPL II instead */ - if (job->audio_mixdowns[i] > HB_AMIXDOWN_DOLBYPLII) { - job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBYPLII; - } - } - } - /* all other mixdowns will have been preserved here */ - break; - - /* 3F/1R input */ - case A52_3F1R: - /* if we've requested a mono mixdown, and it is supported, then do the mix */ - /* use dpl1 if not supported */ - if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecSupportsMono == 0) { - job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBY; - } else { - /* we have a 4.0 or 4.1 source, so we can't do DPLII or 6ch conversion - default to DPL I instead */ - if (job->audio_mixdowns[i] > HB_AMIXDOWN_DOLBY) { - job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBY; - } - } - /* all other mixdowns will have been preserved here */ - break; - - default: - /* if we've requested a mono mixdown, and it is supported, then do the mix */ - if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecSupportsMono == 1) { - job->audio_mixdowns[i] = HB_AMIXDOWN_MONO; - /* mix everything else down to stereo */ - } else { - job->audio_mixdowns[i] = HB_AMIXDOWN_STEREO; - } + /* audioCodecsSupportMono and audioCodecsSupport6Ch are the same for now, + but this may change in the future, so they are separated for flexibility */ + int audioCodecsSupportMono = ((audio->codec == HB_ACODEC_AC3 || + audio->codec == HB_ACODEC_DCA) && job->acodec == HB_ACODEC_FAAC); + int audioCodecsSupport6Ch = ((audio->codec == HB_ACODEC_AC3 || + audio->codec == HB_ACODEC_DCA) && job->acodec == HB_ACODEC_FAAC); + /* find out what the format of our source audio is */ + switch (audio->input_channel_layout) { + + /* mono sources */ + case HB_INPUT_CH_LAYOUT_MONO: + /* regardless of what stereo mixdown we've requested, a mono source always get mixed down + to mono if we can, and mixed up to stereo if we can't */ + if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecsSupportMono == 1) { + job->audio_mixdowns[i] = HB_AMIXDOWN_MONO; + } else { + job->audio_mixdowns[i] = HB_AMIXDOWN_STEREO; } + break; - } - else if (audio->codec == HB_ACODEC_DCA) - { + /* stereo input */ + case HB_INPUT_CH_LAYOUT_STEREO: + /* if we've requested a mono mixdown, and it is supported, then do the mix */ + /* use stereo if not supported */ + if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecsSupportMono == 0) { + job->audio_mixdowns[i] = HB_AMIXDOWN_STEREO; + /* otherwise, preserve stereo regardless of if we requested something higher */ + } else if (job->audio_mixdowns[i] > HB_AMIXDOWN_STEREO) { + job->audio_mixdowns[i] = HB_AMIXDOWN_STEREO; + } + break; - /* sense-check the DCA mixdown */ - - /* audioCodecSupportsMono and audioCodecSupports6Ch are the same for now, - but this may change in the future, so they are separated for flexibility */ - int audioCodecSupportsMono = (job->acodec == HB_ACODEC_FAAC); - int audioCodecSupports6Ch = (job->acodec == HB_ACODEC_FAAC); - - /* find out what the format of our source DCA audio is */ - switch (audio->config.dca.dcaflags & DCA_CHANNEL_MASK) { - - /* mono sources */ - case DCA_MONO: - /* regardless of what stereo mixdown we've requested, a mono source always get mixed down - to mono if we can, and mixed up to stereo if we can't */ - if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecSupportsMono == 1) { - job->audio_mixdowns[i] = HB_AMIXDOWN_MONO; - } else { - job->audio_mixdowns[i] = HB_AMIXDOWN_STEREO; - } - break; - - /* stereo input */ - case DCA_CHANNEL: - case DCA_STEREO: - case DCA_STEREO_SUMDIFF: - case DCA_STEREO_TOTAL: - /* if we've requested a mono mixdown, and it is supported, then do the mix */ - /* use stereo if not supported */ - if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecSupportsMono == 0) { - job->audio_mixdowns[i] = HB_AMIXDOWN_STEREO; - /* otherwise, preserve stereo regardless of if we requested something higher */ - } else if (job->audio_mixdowns[i] > HB_AMIXDOWN_STEREO) { - job->audio_mixdowns[i] = HB_AMIXDOWN_STEREO; - } - break; - - /* dolby (DPL1 aka Dolby Surround = 4.0 matrix-encoded) input */ - /* the A52 flags don't allow for a way to distinguish between DPL1 and DPL2 on a DVD, - so we always assume a DPL1 source for A52_DOLBY */ - case DCA_DOLBY: - /* if we've requested a mono mixdown, and it is supported, then do the mix */ - /* preserve dolby if not supported */ - if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecSupportsMono == 0) { - job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBY; - /* otherwise, preserve dolby even if we requested something higher */ - /* a stereo mixdown will still be honoured here */ - } else if (job->audio_mixdowns[i] > HB_AMIXDOWN_DOLBY) { - job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBY; - } - break; - - /* 3F/2R input */ - case DCA_3F2R: - /* if we've requested a mono mixdown, and it is supported, then do the mix */ - /* use dpl2 if not supported */ - if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecSupportsMono == 0) { - job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBYPLII; - } else { - /* check if we have 3F2R input and also have an LFE - i.e. we have a 5.1 source) */ - if (audio->config.dca.dcaflags & DCA_LFE) { - /* we have a 5.1 source */ - /* if we requested 6ch, but our audio format doesn't support it, then mix to DPLII instead */ - if (job->audio_mixdowns[i] == HB_AMIXDOWN_6CH && audioCodecSupports6Ch == 0) { - job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBYPLII; - } - } else { - /* we have a 5.0 source, so we can't do 6ch conversion - default to DPL II instead */ - if (job->audio_mixdowns[i] > HB_AMIXDOWN_DOLBYPLII) { - job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBYPLII; - } - } - } - /* all other mixdowns will have been preserved here */ - break; - - /* 3F/1R input */ - case DCA_3F1R: - /* if we've requested a mono mixdown, and it is supported, then do the mix */ - /* use dpl1 if not supported */ - if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecSupportsMono == 0) { - job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBY; - } else { - /* we have a 4.0 or 4.1 source, so we can't do DPLII or 6ch conversion - default to DPL I instead */ - if (job->audio_mixdowns[i] > HB_AMIXDOWN_DOLBY) { - job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBY; - } - } - /* all other mixdowns will have been preserved here */ - break; - - default: - /* if we've requested a mono mixdown, and it is supported, then do the mix */ - if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecSupportsMono == 1) { - job->audio_mixdowns[i] = HB_AMIXDOWN_MONO; - /* mix everything else down to stereo */ - } else { - job->audio_mixdowns[i] = HB_AMIXDOWN_STEREO; - } - } + /* dolby (DPL1 aka Dolby Surround = 4.0 matrix-encoded) input */ + /* the A52 flags don't allow for a way to distinguish between DPL1 and DPL2 on a DVD, + so we always assume a DPL1 source for A52_DOLBY */ + case HB_INPUT_CH_LAYOUT_DOLBY: + /* if we've requested a mono mixdown, and it is supported, then do the mix */ + /* preserve dolby if not supported */ + if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecsSupportMono == 0) { + job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBY; + /* otherwise, preserve dolby even if we requested something higher */ + /* a stereo mixdown will still be honoured here */ + } else if (job->audio_mixdowns[i] > HB_AMIXDOWN_DOLBY) { + job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBY; + } + break; - } - else - { + /* 3F/2R input */ + case HB_INPUT_CH_LAYOUT_3F2R: + case HB_INPUT_CH_LAYOUT_3F2RLFE: + /* if we've requested a mono mixdown, and it is supported, then do the mix */ + /* use dpl2 if not supported */ + if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecsSupportMono == 0) { + job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBYPLII; + } else { + /* check if we have 3F2R input and also have an LFE - i.e. we have a 5.1 source) */ + if (audio->input_channel_layout == HB_INPUT_CH_LAYOUT_3F2RLFE) { + /* we have a 5.1 source */ + /* if we requested 6ch, but our audio format doesn't support it, then mix to DPLII instead */ + if (job->audio_mixdowns[i] == HB_AMIXDOWN_6CH && audioCodecsSupport6Ch == 0) { + job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBYPLII; + } + } else { + /* we have a 5.0 source, so we can't do 6ch conversion + default to DPL II instead */ + if (job->audio_mixdowns[i] > HB_AMIXDOWN_DOLBYPLII) { + job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBYPLII; + } + } + } + /* all other mixdowns will have been preserved here */ + break; + + /* 3F/1R input */ + case HB_INPUT_CH_LAYOUT_3F1R: + /* if we've requested a mono mixdown, and it is supported, then do the mix */ + /* use dpl1 if not supported */ + if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecsSupportMono == 0) { + job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBY; + } else { + /* we have a 4.0 or 4.1 source, so we can't do DPLII or 6ch conversion + default to DPL I instead */ + if (job->audio_mixdowns[i] > HB_AMIXDOWN_DOLBY) { + job->audio_mixdowns[i] = HB_AMIXDOWN_DOLBY; + } + } + /* all other mixdowns will have been preserved here */ + break; - /* assume a stereo input and output for non-AC3/DCA audio input (LPCM, MP2), - regardless of the mixdown passed to us */ - job->audio_mixdowns[i] = HB_AMIXDOWN_STEREO; + default: + /* if we've requested a mono mixdown, and it is supported, then do the mix */ + if (job->audio_mixdowns[i] == HB_AMIXDOWN_MONO && audioCodecsSupportMono == 1) { + job->audio_mixdowns[i] = HB_AMIXDOWN_MONO; + /* mix everything else down to stereo */ + } else { + job->audio_mixdowns[i] = HB_AMIXDOWN_STEREO; + } - } + } /* log the output mixdown */ for (j = 0; j < hb_audio_mixdowns_count; j++) { |